What is the recommended tire pressure range for the Verano?

2 Answers
LeHarrison
07/25/25 1:02pm
The normal tire pressure range for the Verano is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. To check the current tire pressure of the Verano during daily driving, you can activate the tire pressure monitoring system, and the tire pressure values will be displayed on the central LCD screen of the instrument panel. The specific method is: press the button on the right side of the steering wheel, select the information column interface, scroll down to find the tire pressure monitoring information, and then view the specific tire pressure values. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, compromising driving safety; increases movement of tire parts, leading to abnormal heat generation due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, leading to tire damage and abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to remain on. Simply perform a tire pressure reset to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving (e.g., by impact), the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.
Was this review help?
15
0
Share
VanElliot
08/11/25 8:35pm
I remember when I picked up the Verano at the 4S dealership, the technician specifically advised that maintaining a cold tire pressure of 2.4-2.5 bar is safest. The silver label on the driver's side door frame also clearly states 240 kPa for the front tires and 230 kPa for the rear tires. Last time before a long trip, I checked the tire pressure and found the left front tire had dropped to 2.0 bar, so I rushed to top it up. The mechanic said insufficient tire pressure not only wastes fuel but also makes the rims prone to deformation. Now that summer has arrived, I use the cigarette lighter inflator pump to check weekly. Due to thermal expansion, the tire pressure may increase by 0.1-0.2 bar, but never release air in this case. If you have run-flat tires installed, the pressure can be slightly increased to 2.6 bar for better support.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

How to Solve Water in Gasoline?

Solutions for water in gasoline are as follows: 1. Water is denser than gasoline and does not mix with it, so it will settle at the bottom. Use a straw to siphon out the water at the bottom. If conducting an experiment in a lab, a separatory funnel can be used. 2. For regions using ethanol-blended gasoline, especially those preparing to switch to it, it is recommended to use a dedicated ethanol gasoline cleaner to remove water and gum deposits from the fuel tank and fuel lines, preventing rusting of the tank and fuel system components. 3. When there is a significant amount of fuel and clear stratification, the separation method can be used; when there is very little fuel, a straw can be used directly to siphon out the water; when stratification is not obvious, centrifugation followed by settling and then separation is required.
19
3
Share

What does EPC displayed in the car mean?

When the car displays EPC, it indicates a fault in the engine's power control management system. Generally, the EPC light comes on due to poor fuel quality, which triggers the EPC warning light. The solution involves cleaning the throttle body or checking the brake switch and wiring for any issues; the warning light will only go away after the fault is resolved. Below is some information about EPC: 1. EPC stands for Electronic-Power-Control in English, and in Chinese, it refers to the engine electronic stability system, also known as the electronic throttle. This system consists of components such as sensors and controllers. When a sensor malfunctions or detects an abnormal condition, the control system takes appropriate measures based on pre-set programs. 2. The Electronic Stability Program (ESP) is a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the car reaches its dynamic limits. The electronic stability program improves vehicle safety and handling.
3
4
Share

How to Adjust the Time on Mazda Atenza?

To adjust the time on Mazda Atenza, follow these steps: 1. First press the SET button once, then press the right arrow key, and a horizontal line will appear under the time. 2. Then hold down the CLOCK button until the time starts flashing. Press the TRACK or SEEK up arrow to adjust the hour and the down arrow to adjust the minutes. Here is some additional information about the Mazda Atenza: 1. There are two ways to set the time on the Mazda Atenza—one is through the navigation/CD unit, and the other is via the steering wheel controls. If a navigation system is installed, you need to enter the navigation settings to adjust the time. 2. The Mazda Atenza is equipped with the newly developed MZR 2.5L gasoline engine, replacing the previous MZR 2.3L engine. The MZR 2.5L engine features an enlarged cylinder bore and stroke, reduced cylinder spacing, and lightweight pistons. It also improves the flow efficiency of the intake and exhaust ports to enhance torque in the practical range, delivering more linear acceleration and precise response performance.
4
1
Share

Which Way Should the Fuel Tank Cap Be Turned?

In most cases, the fuel tank cap of a car needs to be turned to the left to open and to the right to close. More related knowledge about fuel tanks is as follows: 1. The fuel tank cap refers to the box on the car used for storing gasoline. It is square in shape, made of stainless steel, and has excellent sealing. There is only a small circular opening, about the size of a bottle cap, for easy storage. It is usually located at the rear of the vehicle. 2. Generally, the trunk is separated from the cabin by the rear seats. Therefore, by removing the rear seats, you can access the trunk from the cabin. Once inside the trunk, you can open the lock by using a screwdriver to pry or rotate the movable parts on the lock. 3. If the fuel tank cap cannot be opened, you can start from the trunk. First, remove the trunk liner covering the fuel tank, which is usually secured by plastic clips and can be easily pried open with a screwdriver. After removing the liner, you can see the locking mechanism of the fuel tank cap and the cable used for remote operation. Pulling the cable will open the fuel tank cap. If this doesn't work, you can press the movable part of the locking mechanism while continuously pulling the cable, and the fuel tank cap will open easily. Some car models have a dedicated switch on the locking mechanism; pressing this switch will open the fuel tank cap.
3
5
Share

How to Lift the Rear Seats of a Car?

The method to lift the rear seats of a car is as follows: 1. The rear seats of a car are secured with clips and the base, making it relatively easy to lift, though it requires some effort and strength to accomplish. 2. The operation process is straightforward. Insert your hand under the seat cushion, then forcefully lift the front part upwards until the front clip is released. If operating alone, you can lift each side separately to make it easier to apply force and more convenient. 3. Secure the rear part of the rear seat, then forcefully align the two front clips with the base on the floor and insert them. The entire process does not require any additional tools. Be sure to thoroughly clean the rear seat cushion both before and after lifting to avoid scratches from foreign objects.
5
5
Share

Is bluecore the Blue Whale engine?

Blue Whale series engines are products under Changan, and bluecore is the first-generation Blue Whale engine. The advantages and components of the Blue Whale engine are as follows: Advantages of the Blue Whale engine: The performance of the Blue Whale engine is stable, ensuring the vehicle's power performance. In terms of engines, BlueCore generally refers to engines equipped with DVVT. Blue Whale engines are mostly turbocharged, with DVVT and direct injection. Components: Blue Whale, also known as Blue Whale Power, can be divided into three parts: Blue Whale engine, Blue Whale oil-electric hybrid drive, and Blue Whale transmission. Blue Whale NE is a modular engine production platform, fully compatible with designs such as 48V mild hybrid, HEV hybrid, PHEV plug-in hybrid, and REEV range-extender hybrid. It achieves a high commonality rate of 98% parts sharing and enables the production of engines ranging from 1.0L to 1.8L, not just referring to one or several engines.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.