What is the recommended tire pressure for the Geely Binyue?

[LaJack]

Geely Binyue's normal tire pressure range is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data complies with the international GBT2978-2008 standard. To check the current tire pressure of the Binyue during daily driving, you can activate the tire pressure monitoring system, which will display the tire pressure values on the central LCD screen of the instrument panel. The specific method is: first press the button on top of the left-hand light stalk, then switch through the menu options. After switching a few times, you can find the tire pressure monitoring option on the instrument panel. Click to view the specific tire pressure values. Generally, a tire pressure above 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm if below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will still record the previous data, causing the indicator light to come on. Simply reset the tire pressure monitoring to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.

[AuroraAnn]

I've been driving the Geely Bin Yue for several years. Its standard tire pressure is generally around 2.3 bar, but it depends on the specific model and manual, usually marked on the door pillar label or in the handbook. However, don't overlook the difference between cold and hot tires. The tire pressure increases by about 0.2 bar after driving, so it's best to measure it in the morning before starting the car for the most accurate reading. If the tire pressure is too low, fuel consumption will spike and handling becomes unstable; if it's too high, comfort decreases and the risk of a blowout increases. Personally, I make it a habit to check with a tire pressure gauge once a month, also inspecting tire wear. I slightly increase the pressure in winter and reduce it a bit in summer for safety. Maintaining this habit can save fuel and extend tire life by over two years. In short, don't wait for the warning light to act—safety first.

[StBrady]

I understand the needs of Geely Binyue owners. The recommended tire pressure is approximately 2.3 bar, but adjustments should be made based on load. For instance, when fully loaded, the front tires can be increased to 2.4 bar and the rear tires to 2.5 bar for better stability. During use, tire pressure affects braking distance and steering responsiveness, so it's crucial not to underestimate its importance. I recommend purchasing a digital tire pressure gauge for DIY checks, as mechanical ones are inaccurate and cumbersome. If you notice unstable pressure, it might be due to a leaking valve core or a punctured tire—address it promptly to avoid accidents. Always check before hitting the highway; tire health is directly linked to driving safety, so don't skip this step.

[DominicDella]

As a regular driver of this car, maintaining tire pressure at 2.3 bar is most reasonable. Just refer to the sticker on the door. If it's too low, driving becomes strenuous and increases the risk of a blowout; if too high, the ride gets uncomfortably bumpy. Simply put, installing a tire pressure monitor with dashboard alerts makes things much easier. Get into the habit of checking tire conditions before driving—it significantly reduces unexpected issues. Remember to perform checks in safe locations, never make sudden stops on highways.