What is the recommended tire pressure for Corolla in summer?

2 Answers
BryceAnn
07/29/25 1:52am
Toyota's new Corolla summer standard tire pressure recommendation is 2.3bar for the 1.6L displacement model when the tires are cold, while the 1.2T and 1.8L displacement models recommend 2.4bar cold tire pressure. These cold tire pressure values are applicable for both summer and winter tires. Tire pressure is related to seasons: Tire pressure is safe within a certain floating range (usually 10%) of the factory calibration value. For current civilian car tires, the generally acceptable safe tire pressure range is between 2.0-2.8bar. In winter, the tire pressure should be based on the standard tire pressure of the car tires, with an appropriate increase of about 0.2bar. In summer, it should be about 0.1bar lower than the standard. These adjustments are to prevent tire blowouts. Tire pressure measurement environment: The tire pressure of cold tires and hot tires is different, with a difference of about 0.2bar between them. Measure the tire pressure at least three hours after parking or when the tires have not been driven more than 2 kilometers. If you can only measure the tire pressure when the tires are hot, subtract approximately 0.2bar from the measured value to get the cold tire inflation pressure.
Was this review help?
17
3
Share
HectorLynn
08/12/25 5:55am
My experience with the Corolla is that tire pressure is especially critical in summer—never adjust it arbitrarily. For cold tires, the recommended range is between 30 and 33 PSI, as indicated on the door frame label or the owner’s manual. Tire pressure naturally rises by a few PSI when driving in hot weather, so checking it when the tires are cold is the safest approach. Low tire pressure leads to faster wear and higher fuel consumption, while excessive pressure increases the risk of a blowout, especially at highway speeds. I make it a habit to check the pressure with a gauge before each season change—this extends tire life and saves fuel. Given the significant temperature fluctuations in summer, I check at least once a month to ensure everything is correct.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Does Driving Through Water Have a Significant Impact on a Car?

Driving through water does have an impact on a car, with specific effects as follows: 1. Headlights: If the sealing is not adequate, water can easily enter, forming mist inside the headlights and affecting the light's transmission. 2. Vehicle chassis: During water submersion, the chassis is washed by dirty water, and debris can accumulate in the gaps under the chassis or body. Not cleaning it promptly can create safety hazards. 3. Air filter: When a vehicle drives through water, water may enter the engine through the air intake. 4. Brake pads: After driving through water, it's essential to remove moisture from the brake pads, especially for vehicles with drum brakes, otherwise, the vehicle may lose braking ability, leading to severe danger or accidents. 5. Wiring harness connectors: Opening the engine hood reveals numerous wiring harnesses wrapped in insulating and heat-resistant materials, which are crucial components of the car's electrical system. When driving through water, lower-positioned wiring harness connectors can easily be soaked. If not addressed promptly, intermittent electrical failures may occur in the future, affecting the vehicle's normal operation.
6
1
Share

Why does the car air conditioning not cool when the vehicle is not moving?

Here are the main reasons why the car air conditioning does not cool when the vehicle is not moving: 1. Whether the drive belt is broken or loose: If the drive belt is too loose, it will slip, accelerate wear, and fail to transmit power. 2. Internal component damage: Noise inside the compressor may be caused by damaged internal parts, and internal wear can prevent effective compression. 3. Whether the compressor clutch is slipping: A slipping compressor clutch can also cause issues. 4. Insufficient or excessive refrigerant: If a large number of bubbles are seen through the sight glass, it indicates insufficient refrigerant. If water is poured on the condenser to cool it and no bubbles are seen in the sight window, it indicates excessive refrigerant. 5. Refrigerant leakage: Check for oil stains at the connections and seams of each device. Oil stains at the connections or seams indicate refrigerant leakage, and the relevant parts should be tightened or replaced.
11
1
Share

What is the introduction to gears one to five?

The shifting speeds for gears one to five are as follows: 1. 1st gear: Used for normal starting or climbing very steep slopes. The speed is generally around 10 km/h when using this gear. 2. 2nd gear: Used as a transitional gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed is generally around 20 km/h. 3. 3rd gear: Used at speeds between 20-40 km/h, commonly used for city driving. 4. 4th gear: Used at speeds between 40-60 km/h. 5. 5th gear: Used at speeds of 60 km/h or above. Additional information: Generally, to engage 1st gear, move the gear lever to the left and then push forward; for 2nd gear, move left and then push down; for 3rd gear, return to neutral and then push straight up; for 4th gear, return to neutral and then push straight down; for 5th gear, push straight to the right and then up (specific operations should refer to your vehicle's gear markings).
14
1
Share

What is the minimum ground clearance of the Hyundai Fista?

The minimum ground clearance of the Hyundai Fista is 160mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the car's ability to pass obstacles such as stones and tree stumps without collision. In terms of interior, the Fista is based on Hyundai's design style, with clear functional divisions. It is equipped with a floating central control screen, a three-spoke sports steering wheel, and lines carved in the direction of showing a sense of strength, with a significant sports style. The body dimensions of the Hyundai Fista are 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. The Hyundai Fista is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The body structure is of a load-bearing type.
1
1
Share

Are Vehicle Inspection Stations Open on Saturdays?

Most vehicle inspection stations are closed on Saturdays and Sundays. The vehicle inspection process is as follows: 1. Vehicle Inspection: Bring your driver's license, ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy. Drive the vehicle to the vehicle management office or an authorized vehicle inspection station for inspection. 2. Form Filling: Fill out the annual vehicle inspection application form at the vehicle management office. Then submit the form along with other required documents to the staff and pay the inspection fee. 3. Obtain Inspection Pass Certificate: After payment, proceed to the exterior inspection area where staff will check the vehicle's appearance. Ensure you have a fire extinguisher and warning triangle ready. Once the exterior inspection is complete, the vehicle will immediately undergo the line inspection. After the line inspection, return to the main hall and collect the inspection pass certificate from the designated window. 4. Receive Annual Inspection Stickers: Take the pass certificate to the designated window to collect the annual inspection sticker and environmental inspection pass sticker, completing the inspection process. When collecting these stickers, you'll need to submit a copy of the vehicle registration certificate for each, which can be prepared in advance.
7
0
Share

What does 04 acceleration race mean?

04 refers to the 0~400 meter car acceleration race (also known as the 1/4 mile acceleration race), where the car that completes the 400-meter distance in the shortest time wins. In addition to 04, there are related events such as 02 and 08. This type of competition originated from the NHRA events in the United States, with the first such event held in the U.S. dating back to 1951, after which it became popular nationwide. The rules of the 04 acceleration race: 1. Race time: Two cars compete simultaneously, and the winner is not determined by who finishes first, but by the time each car takes to complete the 400 meters (calculated separately). 2. Classification: Due to significant inherent differences in car engine models, the 04 acceleration race groups cars based on engine displacement and cylinder count, including categories like four-cylinder four-wheel drive, four-cylinder front-wheel drive, six-cylinder front-wheel drive, turbocharged, etc., with very detailed classifications.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.