What is the recommended tire pressure for 750-16 tires?

What is the Difference Between Full Trailer and Semi-Trailer for Tractor Trucks?

Introduction to the differences between full trailer and semi-trailer for tractor trucks: I. Different characteristics. 1. Semi-trailer: Compared to "single-unit" vehicles, semi-trailers can improve the comprehensive economic benefits of road transportation. Transportation efficiency increases by 30-50%, costs are reduced by 30-40%, and fuel consumption decreases by 20-30%. The use of semi-trailers can also promote certain improvements in logistics organization. 2. Full trailer: It has no independent power and relies on other vehicles for towing. II. Different uses. 1. Semi-trailer: Mainly used for transporting large, indivisible goods such as excavators. Flatbed trailers are more suitable for fresh goods like vegetables and fruits, while enclosed trailers are better for bulk goods, moisture-sensitive, or more valuable items. 2. Full trailer: Widely used in airports, ports, railway stations, factories, and large warehouses. It significantly improves the efficiency of cargo transfer and reduces the cost and labor consumption of forklifts.

11

2

Share

What is the automotive PCM module?

Automotive PCM module is the engine control module. Here are the detailed introductions: 1. PCM is used for power output control. It receives sensor signals and performs complex calculations to control fuel supply, air distribution (electronic throttle), injection and ignition timing, intake pressure adjustment. It also determines the engine compensation control coefficient based on temperature, load, knock, combustion conditions, etc. 2. PCM also performs system diagnostic functions, capable of identifying operational faults. It alerts the driver through the MIL (Malfunction Indicator Lamp) and stores identified diagnostic trouble codes. It helps technicians complete repairs by distinguishing fault locations. 3. The engine control calibration program is stored in an electrically erasable programmable read-only memory (EEPROM), which is a permanent memory soldered onto the ECM and cannot be replaced separately. When replacing the ECM, the new ECM must be programmed according to the configured vehicle model before it can be used.

18

3

Share

How Long Can an Engine Generally Last After Cylinder Boring?

Generally, a car engine can run about 3,000 kilometers after cylinder boring, but with proper assembly, it may last hundreds of thousands of kilometers. Here are some extended details: 1. After cylinder boring, the engine requires a break-in period similar to a new car, covering two to three thousand kilometers. The longevity depends on the extent of the overhaul and parts replacement. If all four matching parts are replaced, the crankshaft and bearing shells are in good condition, and the oil seals are renewed, the engine can run another 100,000 or even 200,000 kilometers without issues. 2. Cylinder boring is necessary when the engine has been running for a long time, causing severe cylinder wear, which inevitably leads to "oil leakage." This results in symptoms like burning oil, reduced power, and increased fuel consumption. 3. Cylinder boring is a common repair method for excessively worn dry cylinder liners. Since a thin layer is "polished" off the cylinder wall surface, the cylinder diameter inevitably becomes slightly larger.

2

4

Share

What does Maintenance A and Maintenance B mean?

A Maintenance and B Maintenance refer to the service codes for vehicle maintenance. A Maintenance is a minor service, while B Maintenance is a major service. Here are the detailed explanations: 1. A Maintenance, commonly known as a minor service, typically refers to the basic maintenance tasks performed at the manufacturer's recommended time or mileage intervals to ensure vehicle performance. It mainly includes oil and oil filter replacement. During engine operation, metal friction generates debris, and impurities and moisture from the air mix into the oil. Continuous lubrication and high-temperature working conditions cause the oil itself to deteriorate and lose effectiveness. The oil filter's efficiency also diminishes over time due to prolonged filtration, making timely replacement necessary. 2. B Maintenance is a major service for the vehicle, performed at the manufacturer's recommended time or mileage intervals. In addition to oil and oil filter replacement, it includes tasks such as replacing the air filter, cabin air filter, brake fluid, and transmission fluid. Therefore, B Maintenance includes A Maintenance, and the two are usually alternated. The selection of major maintenance items can be entirely based on the vehicle's maintenance manual.

14

0

Share

What does MIX/RPT mean in a car?

Pressing MIX/RPT in a car means random playback of the entire directory in the audio system, while holding down MIX/RPT and seeing RPT displayed in the upper right corner indicates repeating the current song. Here are some related introductions: 1. Audio refers to sounds other than human speech and music, including sounds from the natural environment, animal sounds, machine and tool noises, and various sounds made by human actions. 2. Audio equipment generally includes amplifiers, peripheral devices (such as compressors, effects processors, equalizers, VCDs, DVDs, etc.), speakers (sound boxes, loudspeakers), mixing consoles, microphones, display devices, and more, all combined into one system. Among these, speakers are sound output devices, including loudspeakers and subwoofers. 3. A speaker typically includes high, low, and mid-range drivers, but not necessarily just three of them.

19

3

Share

Can an Automatic License Drive a Manual Car?

An automatic transmission license cannot drive a manual transmission car. A manual transmission license can drive an automatic transmission car, but an automatic transmission license cannot drive a manual transmission car. An automatic transmission driver's license belongs to the C2 category. According to China's traffic regulations, the C2 license for small automatic transmission vehicles can only drive small and micro automatic transmission passenger vehicles, as well as light and micro automatic transmission cargo vehicles. Below is an introduction to the C license types: 1. The C1 license allows driving small cars and small automatic transmission cars (C2), low-speed cargo vehicles (C3), and three-wheeled cars (C4). Small cars refer to vehicles with a total mass not exceeding 4.5 tons, seating capacity including the driver not exceeding 9 people, and a length of less than 6 meters. If any condition is not met, the C1 license cannot be used to drive the vehicle. 2. The C2 license specifies small automatic transmission cars, which are vehicles equipped with automatic transmissions. However, most cars on the market today are automatic transmission models. Although the C2 license has more restrictions than the C1, in reality, most people with a C1 license drive automatic transmission cars. 3. The C3 low-speed cargo vehicle is also quite common, with the most representative being the Wuling double-row small truck. According to relevant regulations, it refers to trucks with a maximum design speed of ≤70 km/h, a maximum total mass of ≤4.5 tons, a length of ≤6 meters, a width of ≤2 meters, and a height of ≤2.5 meters, equipped with four wheels.

5

Share

What is the recommended tire pressure for 750-16 tires?

What is the Difference Between Full Trailer and Semi-Trailer for Tractor Trucks?

What is the automotive PCM module?

How Long Can an Engine Generally Last After Cylinder Boring?

What does Maintenance A and Maintenance B mean?

What does MIX/RPT mean in a car?

Can an Automatic License Drive a Manual Car?

What to Do When the Car Shakes and Makes Abnormal Noises in First Gear?

Is It Legal to Modify Vehicle Seats?

Where is the Xiaopeng P7 manufactured?

Is the fuel consumption of the 1.5L Yinglang high?