What is the recommended oil specification in the Hyundai ix35 maintenance manual?

1 Answers
StJackson
07/29/25 12:17pm
The recommended oil specification in the Hyundai ix35 maintenance manual is SAE-5W-20. Oil change method: Loosen the nut at the bottom of the transmission oil pan to allow the old transmission oil to drain naturally by gravity; connect the transmission and the circulation machine through pipeline interfaces, and the new transmission oil will push out the old transmission oil under pressure; remove the oil pan for oil change. Methods to determine whether the oil needs to be changed: Pull out the oil dipstick and smell it closely. If there is a strong sour odor, it indicates that the oil has deteriorated and should be changed; rub the extracted old oil repeatedly between your thumb and index finger. If you feel impurities, poor viscosity, or even a gritty sensation, it should be changed; hold the oil dipstick at a 45-degree angle and observe the oil droplets under light. If no wear particles are visible in the droplets, the oil is in good condition. If there are many wear particles, the oil should be changed.
Was this review help?
9
2
Share
More Forum Discussions

What are the causes of clutch noise?

Here are the reasons for clutch noise: 1. The release bearing lacks oil or is worn and loose, causing noise; 2. The clutch pedal return spring or release bearing return spring is too soft, broken, or detached; 3. The clutch pedal has no free travel; 4. The release lever spring is broken or the floating pin hole is worn and loose; 5. The driven plate rivets are loose or the torsional vibration damper spring is broken. Additional information: The car clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws. The output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission.
8
0
Share

How to Replace the Key Battery for the New Mercedes-Benz SLK320?

Method for replacing the key battery of the new Mercedes-Benz SLK320: From the rear end of the key, push the marked switch upwards, and the hidden mechanical key will pop out slightly; then you can remove the mechanical key. Use the just-removed mechanical key to press against the marked position, apply gentle force, and the key shell can be opened. After removing the key shell, you can see that the battery is positioned quite deep. Simply insert any tool into the gaps on both sides and gently pry to remove the old battery. The dimensions of this car are 4011 mm in length, 1715 mm in width, and 1280 mm in height, with a wheelbase of 2400 mm. The new generation Mercedes-Benz SLK is equipped with 2.0T and 3.0T engines. In addition to conventional power options, the plug-in hybrid model will also be one of the highlights of the new generation Mercedes-Benz SLK.
2
2
Share

Can alcohol be used to disinfect the interior of a car?

Alcohol should not be used to disinfect the interior of a car. More relevant information is as follows: 1. Alcohol is a flammable and explosive liquid, and in an enclosed space like a car, it can easily cause a fire or explosion hazard. To avoid damaging the interior decorations of the car, it is recommended to use disinfectants such as peracetic acid or chlorine dioxide for car interior disinfection. For surfaces of objects inside the car, such as door handles, steering wheels, windows, and seats, you can choose disinfectants containing chlorine, chlorine dioxide, or disinfectant wipes for wiping. 2. Private cars do not require disinfection treatment. In open outdoor areas, it is recommended to open windows for ventilation and air exchange. In underground garages, it is advisable to close the windows and turn on the air conditioning's internal circulation for ventilation. Under the current COVID-19 pandemic situation, it is recommended that passengers sit in the back seat, and both passengers and drivers should wear masks.
5
3
Share

What is an Automotive Gateway?

Automotive Gateway Controller is a core component in the vehicle's electronic and electrical architecture. Serving as the data interaction hub for the entire vehicle network, it can route network data such as CAN, LIN, MOST, and FlexRay across different networks. Specific details are as follows: 1. Function: The network nodes inside a car are like stations. When sending information from one network to another, the transfer station required is the "gateway". Different types of networks transmit data, and data interaction occurs through the gateway. Independent gateways and new intelligent gateways play a crucial role in this era of automotive transformation with their high-speed, multi-channel, and secure high-end performance. 2. Tasks: The automotive gateway handles protocol conversion between different bus types and participates in the network management of each segment; it routes signals and controls message routing timing based on actual needs. The gateway is also the onboard node directly connected to the OBD interface, responsible for forwarding and controlling diagnostic messages for the entire vehicle, while also defending against potential risks to the in-vehicle network from external sources.
2
1
Share

What are the driving steps for the Audi Q5L?

The Audi Q5L is an automatic transmission model, and the driving steps are as follows: 1. The Audi Q5L has five gear positions in total, namely P, R, N, D, and S. Upon entering the driver's seat, you can see the gear lever in the center of the vehicle. Audi uses an aircraft-style gear lever, and there is an electronic parking brake next to it. 2. After starting the car, you need to first press the brake pedal. 3. Then shift the gear to D mode, at which point you need to release the electronic parking brake. After releasing the brake pedal, you can proceed forward. The "R" gear is for reverse. The "P" gear is for parking; after parking the vehicle, shift into this gear. The "N" gear is neutral and can be used for short stops. The "D" gear is for automatic forward driving; pay attention to controlling the throttle and brake pedals. The "S" gear is for sport mode, which provides stronger power output, and you can also manually shift up or down.
11
4
Share

Can I Buy a Car from Another Region and Register It Locally?

You can buy a car from another region and register it locally, as long as the vehicle meets the local emission standards. Before purchasing a car from another region, check with the local vehicle management office to confirm the required emission standards, and then buy a car that complies with those standards. If the purchased car does not meet the local emission requirements, it cannot be registered. After buying a car from another region and driving it back on the highway, you must obtain a temporary license plate from the local vehicle management office in the purchase region; otherwise, driving without a license plate is illegal. If you prefer not to drive the car back, you can arrange for a flatbed truck to transport it. Once the car arrives locally, you can directly visit the local vehicle management office to register it.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.