What is the recommended engine oil specification for the Geely Boyue Pro?

3 Answers
LeMax
09/01/25 4:24am
The official manual for the Geely Boyue Pro recommends using 5W-40 engine oil, with Shell semi-synthetic oil being the brand used by the manufacturer. For subsequent maintenance and oil changes, you may choose from brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. A smaller number here means better low-temperature fluidity, ensuring smoother cold starts for the vehicle. The second number represents the oil's kinematic viscosity at 100°C, with higher values indicating better ability to maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Geely Boyue Pro is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine's valve cover, typically filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.
Was this review help?
16
5
Share
VanEmmett
09/13/25 7:10am
I've been driving the Geely Boyue Pro for several years, always using 5W-30 fully synthetic oil as clearly stated in the manual. This oil is crucial, especially during cold starts, as it protects the engine from wear. I usually choose brands like Shell or Mobil, changing it every 5,000 to 7,000 kilometers, which saves fuel and extends engine life. During long summer trips, the right oil reduces overheating issues and maintains stable fuel consumption. Remember not to buy the cheapest options, as poor-quality oil can lead to carbon buildup and affect performance. In extremely cold regions, other oil grades might be recommended, so I suggest checking your manual to avoid surprises. This makes daily maintenance simple and worry-free.
Was this review help?
18
0
Share
Expand All
Brielle
09/13/25 7:12am
From the perspective of oil specifications, the 5W-30 full synthetic oil is most suitable for the Boyue Pro. This code indicates good low-temperature fluidity (effective at -25°C) and stable high-temperature viscosity, making it adaptable to various climates. Synthetic oil offers better resistance to high-temperature oxidation than conventional oil, providing stronger protection for turbocharged engines like the 1.8T model. Brands such as Castrol offer good cost-performance, with an ideal replacement interval of every 7,500 kilometers. Using the wrong oil long-term can increase friction losses and shorten engine life by over 100,000 kilometers. Pay special attention in areas with significant temperature variations, and it’s best to refer to the specific recommendations in the manual. Remember to replace the oil filter during oil changes—these maintenance details are simple to handle overall.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What are the precautions for drivers in summer driving?

Here are some important precautions for drivers during summer driving: Preventing tire blowouts: High temperatures in summer cause tire temperatures to rise, making rubber more prone to softening, and in severe cases, leading to tire burning. When driving at high speeds, encountering hard objects can easily cause tire blowouts. Therefore, always check tire pressure while driving. If tires are overheated or the pressure is too high, park the vehicle in a shaded area and allow it to cool naturally. Preventing vapor lock: High summer temperatures limit heat dissipation, especially when driving at low speeds with high engine RPMs, making it difficult to dissipate heat and increasing the risk of vapor lock. If vapor lock occurs, stop the vehicle immediately to cool down and address the issue. Preventing coolant shortage: In hot weather, water in the radiator evaporates more quickly. Regularly check the coolant level and monitor the temperature gauge. If a coolant shortage is detected, stop the vehicle immediately and wait for it to cool down before adding water. Be cautious not to open the radiator cap immediately to avoid burns.
8
2
Share

Does the Passat's one-button start require pressing hard?

One-button start does not require pressing hard, just press and hold to start. Passat one-button start: Press the one-button start button once to power on, press and hold to start. Press the handbrake down to release, then shift gears to drive. One-button start: The one-button start device is part of a smart car, a button device that simplifies the starting process and can also turn off the engine. This device can be retrofitted at the original car key lock position or as an independent panel. Unlike traditional mechanical key ignition and conventional starting procedures, simply pressing the one-button start button can start or turn off the engine, avoiding the hassle of losing or searching for keys. Most of the time, you need to step on the foot brake during the ignition process.
17
0
Share

What are the reasons why the Audi A4 cannot engage gears?

Audi A4 cannot engage gears due to reasons such as a dead battery, incorrect gear position, or lack of antifreeze. Dead battery: This may be caused by leaving the headlights on for an extended period or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also lead to vehicle circuit malfunctions. Incorrect gear position: When starting an automatic transmission vehicle, the gear must be in the P (Park) or N (Neutral) position. If it is in R (Reverse) or D (Drive), the car will not start. Similarly, some manual transmission vehicles will not start if the clutch is not depressed. Lack of antifreeze: Adding water or using low-quality antifreeze can cause the entire cooling system to freeze in extremely cold winter conditions, leading to engine block cracks. This results in the car's water pump failing to operate, preventing the engine from starting and potentially damaging other engine components.
2
4
Share

How many coolant temperature sensors does the Skoda Octavia have?

Skoda Octavia has only one coolant temperature sensor. Location of the coolant temperature sensor: It is installed at the position where the circulating water in the engine returns to the radiator. It can detect the temperature inside the engine. Generally, cars have a thermostat, so the temperature is always controlled at 90 degrees, which is the optimal operating temperature for the engine. Function of the coolant temperature sensor: To adjust the fuel injection quantity, increasing the fuel injection when the temperature is low; To adjust the ignition timing, advancing the ignition timing when the temperature is low and retarding it when the temperature is high to prevent knocking; To affect the idle control valve, where the ECU controls the idle control valve based on the coolant temperature sensor signal at low temperatures to increase the idle speed; To affect the EGR valve.
5
3
Share

What Causes the Abnormal Noise When a Corolla Goes Over Speed Bumps?

Corolla making abnormal noise when going over speed bumps may be due to component aging, excessive tie rod clearance, dust cover rupture and oil leakage, or chassis issues. Component Aging: If the ball joint of the stabilizer link is aged, you can remove the tire to check if the rubber at the ball joint has aged. Excessive Tie Rod Clearance: Check if the tie rod end has excessive clearance. This requires professional judgment, but you can shake both sides of the tire forcefully when the vehicle is lifted to see if there is any looseness. Dust Cover Rupture and Oil Leakage: If the dust cover of the drive shaft is ruptured and leaking oil, it will accelerate the wear of the drive shaft, leading to abnormal noise when damaged. Chassis Issues: Damaged or loose chassis components can also cause abnormal noise when driving on uneven roads. Generally, it is necessary to check some steering mechanism screws and shock absorber rubbers.
6
1
Share

What is the suitable tire pressure for cars in summer?

In summer, the normal tire pressure for cars is generally suitable between 2.2-2.4 bar. As the temperature and road surface temperature rise, the tire pressure can easily increase during high-speed or long-distance driving. Excessive tire pressure can lead to loss of braking control and may cause tire bursts when encountering road protrusions or depressions. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing tire elasticity and increasing the load on the car during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, leading to internal cracks, bursts, and blowouts.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.