What is the reason why the wheels don't move after releasing the handbrake?

1 Answers
MacJoel
07/29/25 6:51pm
The wheels not moving after releasing the handbrake may be due to a stuck brake caliper or the need for adjustment. Here are the specific details: Function of the handbrake: The parking brake, commonly referred to as the handbrake, provides resistance to the car when parked to prevent it from rolling. The parking brake, whether manual or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. Auto Hold function: The intelligent AUTOHOLD auto-hold function automatically engages the four-wheel brakes when the vehicle is stopped at traffic lights or on slopes. To release the stationary state, simply lightly press the accelerator to disengage the brakes.
Was this review help?
18
3
Share
More Forum Discussions

How to Cancel the Tire Pressure Monitoring on a Golf Car?

To deactivate the tire pressure monitoring on a Golf car, follow these steps: 1. Ensure the vehicle is in the started state. 2. Check if the dashboard displays the total mileage image. If not, press the return button located at the bottom left of the steering wheel to show the total mileage. 3. Press the upward arrow button on the left side of the steering wheel, and English text will appear on the dashboard. 4. Press the R button on the dashboard. If there is no R button, press the lever above the dashboard, and then a line of English text will pop up on the dashboard. 5. Press the + button on the right side of the steering wheel. 6. Restart the vehicle to successfully cancel the tire pressure monitoring on the Golf car.
20
4
Share

What is the curb weight of the Hyundai Elantra?

The curb weight of the Hyundai Elantra is 1238kg. Here is a detailed introduction to the curb weight of a car: 1. The curb weight of a car refers to the weight of the car when it is fully equipped according to the factory technical conditions, such as spare tires, tools, etc., and all fluids are filled. This is an important design indicator for a car. This indicator must be both advanced and practical. It is closely related to the design level, manufacturing level, and industrialization level of the car. 2. The curb weight is the self-weight of a car, which refers to the weight of the car when it is ready to drive under normal conditions plus the accessories carried with the car. 3. The curb weight of a car is also an important parameter that affects the car's fuel consumption. Because the fuel consumption of a vehicle is directly proportional to the curb weight, that is, the heavier the curb weight, the more fuel the car consumes.
20
5
Share

In which year was the last batch of Mercedes-Benz MB100 produced?

Mercedes-Benz MB100 was last produced in 2014. Here are the detailed specifications of the Mercedes-Benz MB100: 1. The Mercedes-Benz MB100 is an MPV model. 2. The MB100 is equipped with two types of engines: a 5-cylinder diesel engine producing 95 horsepower and a 4-cylinder gasoline engine producing 122 horsepower. The engines not only offer high power and torque but also operate with low noise. The MB100 features a front-engine, front-wheel-drive layout with a reasonable weight distribution, making it safe and easy to maintain. The front suspension of the MB100 uses a spherical fork lever and torsion bar spring, paired with a multi-leaf spring rear suspension system. 3. In terms of interior configuration, the MB100's most notable feature is its diversified luxury in-car equipment. It comes with original high-end audio systems, curtain rails throughout the car, full carpeting, anti-glare glass, and other equipment.
2
4
Share

What causes the bubbling sound in the Skoda Yeti's exhaust pipe?

Skoda Yeti's exhaust pipe producing a bubbling sound may be caused by a blocked drain hole in the exhaust pipe, leading to condensed water accumulating inside the pipe while driving, which creates the bubbling noise. More information about the exhaust pipe is as follows: 1. The exhaust pipe generally includes the front exhaust pipe and the rear exhaust pipe. 2. The exhaust pipe is part of the engine's exhaust system, which mainly consists of the exhaust manifold, the exhaust pipe, and the muffler. The three-way catalytic converter, usually installed to control the engine's pollutant emissions, is also part of the exhaust system. 3. It is actually a normal phenomenon for a car's exhaust pipe to drip water, indicating that the car's engine is fully combusting, and it has nothing to do with the exhaust pipe.
6
2
Share

Where is the Malibu's Cabin Air Filter Located?

The Malibu's cabin air filter is located inside the glove compartment on the passenger side. The steps to replace the cabin air filter are as follows: 1. There is a suspension cord on the right side of the glove compartment. 2. Press both sides of the glove compartment inward and then lift it outward to remove it. 3. At this point, use an object (such as chopsticks, etc.) to secure the suspension cord to prevent it from retracting. 4. Unscrew a total of five screws—four on the sides and one in the middle. The connection wire for the glove compartment light can be left connected or disconnected. If left connected, be careful not to break it. At this point, you can see the cover plate for the cabin air filter. 5. Open the cover plate by releasing the fixing clips on both sides and the upper middle part. After pulling out the glove compartment, you will see a black box, which is the cabin air filter. 6. Replace the cabin air filter and then reinstall it in the reverse order.
19
2
Share

How to Start the Emgrand GS When the Battery is Dead?

When the battery of a Geely Emgrand GS is dead, you can start the car using the following methods: 1. Jump-starting with another car: You can use another car's battery to jump-start your vehicle. Connect the positive terminal to the positive terminal and the negative terminal to the negative terminal using jumper cables. Remove the cables once the car is started. 2. Using a dedicated charger to recharge the battery: The general voltage of a car battery is 12V. When the battery is dead, you can open the hood and use a dedicated charger to recharge the battery. After recharging, you can start the vehicle. However, after recharging, you should replace the battery at a car repair shop as soon as possible to prevent the battery from dying again. 3. Using downhill momentum to start the vehicle: You can utilize the kinetic energy generated when the car is going downhill by engaging the appropriate gear to start the vehicle. 4. Replacing the battery yourself: If the car cannot start due to a dead battery, you can replace the battery yourself.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.