What is the reason why the van engine cannot accelerate?

Why was the Volkswagen Scirocco discontinued?

Affected by the emissions scandal, Volkswagen had previously borrowed from major European banks to deal with the incident. The enormous financial pressure forced Volkswagen to abandon some low-profit projects, such as the Phaeton, Beetle, and Scirocco. Here is relevant information: 1. Since 2017, the Scirocco model under Volkswagen has no longer accepted orders overseas, indicating that this product may have been officially discontinued. According to Volkswagen's previous plans, the Scirocco will not have a successor model. 2. The discontinuation of the Scirocco is not entirely surprising, but the lack of a successor is somewhat regrettable. However, Volkswagen is also considering whether to revive this model with a new powertrain. There were previous reports that Volkswagen planned to transform the Scirocco into a brand-new electric product to return to the market.

9

0

Share

Does a Faulty Three-Way Catalytic Converter Increase Fuel Consumption?

If the three-way catalytic converter in a car is damaged, it will affect the normal operation of the oxygen sensor, causing the engine ECU to inaccurately control the fuel injection volume. This, in turn, leads to abnormal increases in vehicle fuel consumption. Below are the specific manifestations of a damaged three-way catalytic converter: 1. Increased exhaust pollution. Without the catalytic reduction of harmful gases in the exhaust emissions by the three-way catalytic converter, vehicle exhaust pollution will worsen. 2. Engine malfunction light illuminates. When the engine's electronic control ECU cannot detect or detects abnormal signals from the oxygen sensor, the engine malfunction light will turn on. 3. Increased fuel consumption and decreased power. Damage to the three-way catalytic converter will affect the normal signal of the oxygen sensor, leading to inaccurate fuel injection control by the engine, resulting in increased fuel consumption and decreased power. 4. Poor exhaust flow and engine overheating. The reason for the damage to the three-way catalytic converter is blockage, as the accumulation of high-temperature exhaust gases can easily cause the engine temperature to rise excessively. 5. Carbon deposit buildup. With a severe imbalance in the air-fuel ratio of the combustible mixture in the cylinder, incomplete combustion will produce large amounts of carbon deposits that accumulate in the cylinder, increasing the engine's "chronic" symptoms.

7

1

Share

Tire Pressure Value

Tire pressure normally ranges between 2.3 to 2.5 bar. Tire pressure refers to the air pressure inside the tire, and its level plays a crucial role in the performance and power of the vehicle. The effects of overinflation are: 1. Increased friction between the tire and the ground, reducing tire adhesion; 2. Impaired braking effectiveness and driving comfort, accelerating wear on the central tread and shortening tire lifespan; 3. Increased body vibration, accelerated tire aging, reduced wear resistance, and higher risk of blowouts. The effects of underinflation are: 1. Increased contact area between the tire and the ground, making the steering wheel heavier and affecting driving; 2. Tires are prone to overheating, increasing the risk of blowouts; 3. Expansion of the tire body, leading to cracks on the inner and outer sides; 4. Accelerated rubber aging and faster tire wear.

10

0

Share

What does the yellow exclamation mark in a car mean?

There are four situations when a yellow exclamation mark appears on the car dashboard: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. The following is a detailed analysis of the four situations: General faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance or components and functions. Main faults include parking sensor failure, fuel cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic transmission faults: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. The transmission oil needs to be replaced in time. Abnormal tire pressure: A horizontal line under a bracket with an exclamation mark in the middle. This represents the tire pressure monitoring warning light. When the car's tire pressure is too low, this warning light will come on. It is necessary to check the car's tire pressure and restore it to the normal range. Lighting faults: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating that there is a fault with the car lights. Solution: Go to a 4S shop for inspection and treatment as soon as possible, or you can check it yourself. Focus on checking commonly used bulbs such as turn signals, fog lights, and interior lighting to see where the problem is. There is also a red exclamation mark with a bracket and a circle in the middle. This represents a warning of the braking system, mainly including braking system failure and low brake fluid level. The braking system needs to be inspected and repaired immediately to avoid accidents.

12

2

Share

Is it okay to shift to N gear and step on the foot brake when waiting at a red light?

Whether to shift to N gear and step on the foot brake when waiting at a red light depends on the situation: Generally, red lights last around 20 to 100 seconds. If you need to wait for a red light for less than 30 seconds, you can stay in D gear without shifting, step on the brake, and release the brake to press the accelerator when the light turns green. If the red light lasts more than 30 seconds, it's better not to stay in D gear; shift from D to N gear and engage the handbrake without stepping on the brake. Temporarily stopping with the brake pressed in D gear won't harm the car because the torque converter in the transmission is equipped with a reaction wheel with a one-way clutch, which amplifies the torque from the engine crankshaft. It doesn't rotate at engine idle speed and only engages when the engine speed increases.

7

5

Share

What Causes Severe Engine Vibration?

Generally, the symptoms of engine vibration include: idle vibration and poor acceleration. Severe engine vibration may be caused by 4 reasons: severe engine carbon buildup, ignition system issues, aging engine components, and unstable oil pressure. The specific explanations are as follows: 1. Severe engine carbon buildup causing car vibration: The most common cause is a dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the engine will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. This fluctuation between lean and rich mixtures leads to idle vibration after a cold start. In such cases, the fuel system should be cleaned, and the idle control valve should be checked for carbon buildup and cleaned immediately if necessary. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark plug firing can also cause such issues. At this time, check if the spark plugs have excessive carbon buildup and replace them if necessary. 3. Aging engine components: Car engine vibration can also be related to aging engine mounts (also known as engine mounts). Engine mounts are essentially the engine's shock absorption system, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations will be transmitted to the steering wheel and the cabin, causing idle vibration. In such cases, the components should be replaced. 4. Unstable oil pressure: If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect or malfunctioning, it can lead to engine vibration. In this case, check the oil pressure and replace components if necessary.

6

1

Share

What is the reason why the van engine cannot accelerate?

Why was the Volkswagen Scirocco discontinued?

Does a Faulty Three-Way Catalytic Converter Increase Fuel Consumption?

Tire Pressure Value

What does the yellow exclamation mark in a car mean?

Is it okay to shift to N gear and step on the foot brake when waiting at a red light?

What Causes Severe Engine Vibration?

How many colors does the Cadillac CT5 have?

Is Car Maintenance Really Necessary?

What causes abnormal noise when stepping on the accelerator?

Is the Hyundai logo an h or an n?