What is the reason why the Trumpchi GS3 cannot start

1 Answers
KyleAnn
07/30/25 7:04am
The Trumpchi GS3 cannot start because the car battery is dead, and it only needs to be recharged. The battery is an essential part of a car and can be divided into traditional lead-acid batteries and maintenance-free batteries. The following is an introduction to the battery: 1. Advantages: Since the battery uses lead-calcium alloy as the grid frame, the amount of water decomposition during charging is less, and the amount of water evaporation is also low. In addition, the sealed structure of the shell releases very little sulfuric acid gas, so compared with traditional batteries, it has the advantages of not needing to add any liquid, connecting to the terminal, and long power storage time. 2. Lifespan: The designed lifespan of the battery is 27 months. Generally, family cars are more economical, and new car batteries can last for 3-4 years. However, after replacement, they generally need to be replaced every 2 years. If the battery is not used for a long time, it will slowly discharge on its own until it is scrapped. Therefore, the car should be started at regular intervals to charge the battery.
Was this review help?
17
4
Share
More Forum Discussions

What are the disadvantages of using a circulation machine to change transmission fluid?

The drawback of using a circulation machine to change transmission fluid lies in the increased usage of transmission fluid, leading to higher costs. Below is a related introduction: 1. Traditional manual transmission fluid change method: The traditional manual method only replaces the fluid in the transmission oil pan, leaving some ATF inside the transmission that cannot be removed. After the change, new and old fluids are mixed, resulting in an incomplete replacement that doesn't fully serve the purpose of changing the fluid. 2. Circulation machine transmission fluid change method: Using a circulation machine to replace ATF involves simultaneously extracting old fluid and injecting new fluid, using pressure to push out the old fluid with the new one. This ensures that the transmission is filled with new ATF, which can be visually confirmed on the equipment, achieving a complete replacement effect. Generally, using a circulation machine requires more than double the amount of new fluid compared to the traditional manual method. Although the cost increases, the effect is significantly better. A circulation machine generates pressure to dynamically replace automatic transmission fluid, achieving a replacement rate of over 90%. The operation process is simple but requires equipment support.
19
3
Share

Why Does the Engine Belt Make Abnormal Noises?

Abnormal noises from the engine belt may be due to a reduced friction coefficient on the belt surface or excessive belt wear, requiring immediate inspection and replacement by the owner. Below is relevant information about engine belts: 1. Replacement Interval: The replacement cycle for engine belts varies by vehicle model. Typically, the timing belt should be replaced every 60,000 to 80,000 kilometers. Some higher-quality belts may last up to 100,000 kilometers. 2. Precautions: During routine maintenance, it is advisable to regularly inspect the timing belt. If cracks are found, do not continue using it; replace it immediately to avoid potentially severe consequences.
9
5
Share

Is fingerprint recording required for the Theory Test?

Fingerprint recording is required for the Theory Test. Below is relevant information about the Theory Test: 1. Definition of the Theory Test: The Theory Test refers to the driver's theoretical examination conducted at the Vehicle Management Office, which is a mandatory licensing test for all driver's license applicants. The test content includes the most fundamental knowledge such as driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the Theory Test is arranged independently by local Vehicle Management Offices. 2. Purpose of the Theory Test: The Theory Test is part of the teaching and examination outline for motor vehicle driver training. This outline divides the examination into three subjects, organized by the traffic management department of the public security authority. The examination sequence proceeds in the order of Theory Test (Subject 1), Practical Driving Test (Subject 2), and Road Test (Subject 3). Candidates can proceed to the next subject only after passing the previous one; if a candidate fails a subject, they must retake that subject's examination.
1
5
Share

What is the normal temperature range for a car?

Here are the normal temperature ranges for a car engine: The normal operating temperature of a car engine is generally between 80°C and 90°C, while some high-performance engines can operate at temperatures above 90°C to 100°C. Below is relevant information about car engine temperature: 1. When the temperature is too high: When the engine temperature is excessively high, the intake air temperature also rises, resulting in reduced actual air intake. This decreases the engine's volumetric efficiency, leading to reduced power and torque output, manifesting as insufficient engine power. 2. When the temperature is too low: If the temperature of the air-fuel mixture (or air) entering the cylinders is too low, the combustible mixture quality deteriorates, making ignition difficult or causing delayed combustion. This results in decreased engine power, increased fuel consumption, and significantly higher emissions of harmful gases.
20
2
Share

What are the dimensions of various parking spaces?

Parking space standard dimensions are mainly divided into two sizes: large and small. 1. Large parking spaces are 15.6 meters long and 3.25 meters wide, suitable for medium and large vehicles; 2. Small parking spaces are 6 meters long and 2.5 meters wide, suitable for small vehicles. Here is additional information: 1. Parking space arrangements can be categorized into parallel, angled (30°, 45°, 60°), and perpendicular. Large vehicle parking spaces should not use angled or perpendicular arrangements. 2. According to the "Urban Road Parking Space Setting Standards", roads with a width of less than 6 meters for motor vehicle traffic shall not have roadside parking spaces, and no parking spaces will be allowed on crosswalks or main roads of expressways.
5
3
Share

What does ESC mean?

ESC is the term used by General Motors for the Electronic Stability Control system. More information about ESC is as follows: 1. ESC is an active safety technology that assists drivers in controlling the vehicle, and it is also an extension of the functions of the Anti-lock Braking System (ABS) and Traction Control System (TCS). On this basis, it adds a yaw rate sensor, lateral acceleration sensor, and steering wheel angle sensor when the vehicle is steering. 2. ESC mainly controls the longitudinal and lateral stability of the vehicle to ensure stable driving. When the vehicle understeers or oversteers, the system will control one or more wheels to brake, adjusting the vehicle's body posture during lane changes or cornering, making the car more stable when changing lanes or turning.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.