···
Log in / Register

What is the reason why the Teana's car lock horn does not sound?

1 Answers
LaDante
08/30/25 2:49am
The reason is that the lock horn mode was accidentally canceled. Simultaneously press and hold the lock (LOCK) and unlock (UNLOCK) buttons on the smart key for more than 2.5 seconds. The hazard indicator will flash once, and the horn will sound once, enabling the horn mode. Below are specific details about the Teana: 1. Model: The length, width, and height are 4901 mm, 1850 mm, and 1450 mm respectively, with a wheelbase of 2825 mm. 2. Engine: Equipped with a 2.0-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine has a maximum power of 115 kW and a maximum torque of 197 Nm; the 2.0-liter turbocharged engine has a maximum power of 179 kW and a maximum torque of 371 Nm. Both are paired with a CVT transmission. 3. Suspension: The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
Was this review help?
7
5
Share
More Forum Discussions

Can CarPlay Project Videos?

CarPlay cannot project videos. Here is relevant information: Introduction to CarPlay: CarPlay is an in-car system released by Apple Inc. in the United States, which seamlessly integrates users' iOS devices and iOS user experience with the dashboard system. CarPlay only supports iPhones with a Lightning interface. Although iPads now support this interface, Apple has not listed iPads as hardware devices supported by CarPlay. WWDC: On June 13, 2016, at the WWDC developer conference, Apple announced that its smart car system CarPlay would be updated alongside iOS 10, becoming the perfect partner for the new version of Apple Maps and Siri.
5
4
Share

Where is the Sienna tire pressure reset button located?

Sienna's tire pressure reset button is located below the dashboard on the driver's side. The tire pressure monitoring system measures tire pressure through pressure sensors, then wirelessly transmits the pressure data from inside the tire to a central receiver module for display. The Sienna is a Toyota-branded MPV with the following dimensions: length 5105mm, width 1966mm, height 1750mm, and a wheelbase of 3030mm. It is equipped with a 3.5L naturally aspirated engine producing maximum power of 196kW at 6200rpm and peak torque of 322Nm at 4700rpm.
16
5
Share

Can You Continue Turning When the Red Light Comes On in the Waiting Zone?

If you have already entered the left-turn waiting zone and crossed the stop line when the light is green, you can continue turning even when the light turns red. Below is relevant information: Green Light: When the green light is on, vehicles are allowed to proceed, but turning vehicles must not impede the passage of through vehicles or pedestrians. Yellow Light: When the yellow light is on, vehicles that have already crossed the stop line can continue to proceed. Red Light: When the red light is on, vehicles are prohibited from proceeding. Special Cases: At intersections without dedicated non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not impede the passage of other vehicles or pedestrians.
10
3
Share

What is an Engine Overhaul?

An engine overhaul refers to the replacement of major internal components and the changing of engine oil and filters. The main components include: crankshaft, pistons, connecting rods, cylinder liners, valve assemblies, piston rings, piston connecting rods, valve seat rings, crankshaft connecting rods, piston rings, timing belts, rear crankshaft oil seals, and front transmission oil seals. Precautions after an engine overhaul are: 1. Avoid high RPMs; 2. Warm up the engine before driving when cold starting; 3. Follow load capacity regulations; 4. Avoid sudden acceleration and hard braking; 5. Pay attention to gear changes and avoid driving in a single fixed gear for extended periods; 6. Change the engine oil as soon as possible after the break-in period.
4
2
Share

Are Motorcycles Allowed on Highways?

According to the National Road Traffic Safety Law, there is no explicit prohibition against motorcycles on highways. Except in regions where motorcycles are explicitly banned from highways, motorcycles can access highways if they meet the following conditions. Here are the relevant details: Helmet: Riders must wear a helmet when operating a motorcycle, and no passengers or cargo are allowed except for the driver. Right-side driving: The speed of a motorcycle must not exceed 80 kilometers per hour, and it must stay on the right side of the road with a speed maintained between 70km/h to 80km/h. License: A valid driver's license is required for motorcycles on highways.
3
0
Share

What is the recommended waxing cycle for cars?

Car waxing cycle is approximately 2 to 3 months, adjusted based on driving environment and parking conditions. The functions of car waxing include: 1. Waterproofing and acid rain protection, reducing water droplet adhesion on the car body; 2. The wax film can reflect some light, effectively preventing paint aging; 3. Reducing friction between the car body and air/dust, preventing static electricity; 4. Enhancing paint gloss and restoring brilliance; 5. Light scratches can be polished with wax. Precautions for car waxing: 1. Thoroughly clean dirt and dust from the car surface before waxing; 2. Wax in a shaded area to avoid body heat; 3. Completely remove wax residue to maintain aesthetics.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.