What is the reason why the reverse light sometimes does not work?

What are the body dimensions of the Toyota RAV4?

The length, width, and height of the Toyota RAV4 are 4600mm/1855mm/1680mm, which are official data. The length of the Toyota RAV4 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two parallel planes touching the outermost rigid fixed protruding points on both sides of the vehicle, parallel to the longitudinal symmetry plane. The height refers to the distance between the highest point of the vehicle and its supporting plane. The naturally aspirated engine of the Toyota RAV4 has a maximum power of 126kW and a maximum torque of 209Nm. This engine reaches its maximum power at 6600 rpm and its maximum torque between 4400-5000 rpm. It features in-cylinder direct injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission (CVT). There are national regulations regarding vehicle dimensions. According to the national standard 'GB1589-89,' the total width of a vehicle does not include side mirrors. The limitation on vehicle width is designed to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring enough space during overtaking to prevent accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

16

5

Share

How to Start a BMW X5 with a Dead Battery?

To jump-start a BMW X5 with a dead battery, you can use jumper cables to connect it to another vehicle. First, open the hoods of both cars. Connect the negative end of the jumper cable to the negative terminal of the dead battery and the other end to the negative terminal of the assisting vehicle's battery. Similarly, connect the positive end of the jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the assisting vehicle's battery. Then, start the assisting vehicle and rev the engine slightly before attempting to start the BMW X5. Here are some methods to restart a car with a dead battery: 1. Push Start: This method only works for manual transmission cars and requires the battery to have some remaining charge, as well as suitable terrain conditions. If there are no passengers, try asking pedestrians for help. Shift into first gear, depress the clutch, turn the ignition key to the ACC position, and have helpers push the car from behind. Once the car gains sufficient speed, release the clutch. The car will start due to inertia. 2. Borrowing Power: If you don’t have an emergency jump starter—which few car owners carry—you can ask nearby drivers for assistance to jump-start your car. 3. Towing: The last method is to tow the car. Find a sturdy tow rope and securely fasten it between the front and rear of both vehicles. Start towing slowly, ensuring both vehicles maintain the same speed. Pay attention to road safety, and if another vehicle approaches from behind, notify the towing vehicle to pull over gradually.

11

2

Share

What engine is equipped in the Baojun 510?

The engine of the Baojun 510 is produced in a domestic micro and small engine model factory, making it a domestically manufactured engine. The engine model used in the Baojun 510 is the L2B, with a maximum horsepower of 112 HP, a maximum power output of 77 KW, a maximum power speed of 5800 rpm, and a peak torque of 147 N.m. For the daily maintenance of the Baojun 510's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance will deteriorate, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

1

4

Share

What is the solution for the buzzing noise at 2000 RPM in the X-Trail?

If there is abnormal noise during instant startup, it may be caused by the starter motor's gear not retracting quickly enough, resulting in flywheel gear grinding noise. The starter motor needs to be inspected. If there is abnormal noise during engine idle after startup, the fault point is likely due to excessive clearance between the hydraulic tappets and valves inside the engine cylinder head.

14

3

Share

How to Remove Adhesive from Paint Surface?

First, the car owner needs to prepare a bottle of tar and resin remover, which can be purchased at a regular hardware store. Because the resin remover can easily wipe off the tar on the car body without damaging the paint. Next, simply spray the resin remover onto the tar stains on the car body surface. Use a clean cloth to wipe the car body surface, and the tar stains will be easily removed, leaving the car body clean and free of tar.

8

2

Share

What to Do About Raised Particles on the Paint Surface?

First, perform a simple polish on the car body surface. Squeeze an appropriate amount of wax liquid onto the car body. Then use a polishing machine with the wax liquid to polish the surface. Next, wipe the car body with a towel to make the polished area smoother and shinier.

8

4

Share

What is the reason why the reverse light sometimes does not work?

What are the body dimensions of the Toyota RAV4?

How to Start a BMW X5 with a Dead Battery?

What engine is equipped in the Baojun 510?

What is the solution for the buzzing noise at 2000 RPM in the X-Trail?

How to Remove Adhesive from Paint Surface?

What to Do About Raised Particles on the Paint Surface?

What is the fuel consumption of the 2013 Malibu?

How Long Does the Battery of a Volkswagen Passat Last?

What is the fuel consumption of the Dongfeng Fengguang 330S?

How much engine oil does the Buick Envision 2.0T require?