What is the reason why the reverse gear cannot be engaged in Baojun 630?

Why can't the Volkswagen parking brake failure start?

Volkswagen parking brake failure cannot start because the brake light switch has a problem, causing the ECU to not receive the normal start power signal. The following are the solutions to the Volkswagen parking brake failure and the usage of the parking brake: Solutions to Volkswagen parking brake failure: Replacing the brake light switch can solve the problem. This issue usually occurs in automatic transmission models, as the brake light switch also has the function of providing start power signal feedback. The parking brake is commonly called the handbrake, and its function is to provide resistance to the car when parking to prevent the car from rolling. Usage of the parking brake: When performing the parking brake, step down on the brake pedal and pull the parking brake lever all the way up. To release the parking brake, step down on the brake pedal, slightly pull the parking brake lever up, press the button on the handle end with your thumb, and then lower the parking brake lever to its original position. When parking on an inclined surface, if you shift to P position first and then perform the parking brake, the weight of the car will make it difficult for the driver to shift out of P position when preparing to start the car. When preparing to start the car, shift the gear lever out of P position before releasing the parking brake.

5

3

Share

Where is the VIN rubbing location for Chery Rely V5?

Chery Rely V5's VIN rubbing is located below the wiper arm in the engine compartment. Below are the VIN rubbing location and related introduction of Rely V5: Chery Rely V5 VIN rubbing location: It is below the wiper arm in the engine compartment. You can see the VIN after removing the plastic cover. However, the VIN of most vehicles is located in the engine compartment or under the left front windshield, which is easy to find. Related introduction of Rely V5: Rely V5 is an MPV model. This car uses three engines in total: a 1.8L naturally aspirated engine, a 1.9L diesel turbocharged engine, and a 2.0L naturally aspirated engine. The 2.0L naturally aspirated engine has a maximum power of 139 horsepower and a maximum torque of 182 N·m. This engine can output maximum power at 5750 rpm and maximum torque at 4300-4500 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The 1.9L turbocharged diesel engine has a maximum power of 126 horsepower and a maximum torque of 271 N·m. This engine can output maximum power at 4000 rpm and maximum torque at 2000 rpm. This engine is equipped with direct injection technology and uses a cast iron cylinder head and block.

5

0

Share

Reasons for Reduced Engine Oil in Dongfeng Peugeot Vehicles in Summer

Reasons for reduced engine oil in Dongfeng Peugeot vehicles during summer: aging of cylinders, pistons, or piston rings; weakened sealing of valve guides; aging of engine body sealing rings leading to reduced sealing; loose oil pan screws. Definition of Engine Oil: Engine oil, also known as motor lubricant, serves to lubricate and reduce friction in the engine, assist in cooling, provide sealing to prevent leaks, protect against rust and corrosion, and act as a shock absorber. Composition of Engine Oil: Engine oil consists of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties. Additives are used to compensate for and improve any deficiencies in the oil's performance, and it is categorized into diesel engine oil and gasoline engine oil.

12

0

Share

How to reset the tire pressure warning in the TACQUA?

TACQUA tire pressure monitoring light reset method: Turn on the ignition, press and hold the SET button of the tire inflation pressure control system. The tire monitoring button is located on the black button on the front panel near the gear shift lever until the instrument indicator light comes on. The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, containing an exclamation mark inside. The tire pressure monitoring indicator light indicates abnormal tire pressure. There are generally three reasons for abnormal tire pressure in the TACQUA: Abnormal tire pressure: Usually, it will trigger an alarm if the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the original data, causing the tire pressure monitoring indicator light to come on. Simply perform a tire pressure reset at this time. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure fault light to come on. For sensor damage issues, only a brand new replacement can be installed.

5

4

Share

What is the horsepower of the Kawasaki Z650?

The Kawasaki Z650 is equipped with a twin-cylinder engine, delivering 68 horsepower. Internal features of the Z650: The Z650's instrument panel has been upgraded to a 4.3-inch TFT color digital LCD display, which can show mileage, RPM, gear position, fuel gauge, as well as dual trip meters, and can connect to a smartphone via Bluetooth. Performance of the Z650: It is powered by a twin-cylinder engine, producing a maximum power of 68ps at 8000rpm and a maximum torque of 64Nm at 6700rpm. Additionally, the catalytic converter and muffler have been upgraded.

13

1

Share

Why Won't the Volkswagen T-Roc's Wiper Move?

Volkswagen T-Roc's wiper won't move due to a blown fuse or motor burnout. Below are the reasons why the Volkswagen T-Roc's wiper won't move and how to turn off the rear wiper: Reasons why the Volkswagen T-Roc's wiper won't move: If the wiper doesn't move, it may be because the fuse (which prevents circuit overload) has blown, causing the wiper to malfunction. In this case, you need to open the fuse box and check if the corresponding fuse (refer to the manual on the cover) is blown. If it is, simply replace it, but remember to turn off all the car's power before doing so. The likelihood of the motor burning out is actually quite low, but there could be quality control issues. To determine this, first ensure the car's ignition switch is in the power-on state, then try to activate the wiper. If it's not broken, you can hear the motor running, and the sound is quite noticeable. If there's no sound and a faint burning smell, it's likely the motor is damaged. In summary, if it's not a blown fuse, it's best to have it checked at a car repair shop. How to turn off the rear wiper on the T-Roc: Push the wiper lever forward to turn off the rear wiper.

2

4

Share

What is the reason why the reverse gear cannot be engaged in Baojun 630?

Why can't the Volkswagen parking brake failure start?

Where is the VIN rubbing location for Chery Rely V5?

Reasons for Reduced Engine Oil in Dongfeng Peugeot Vehicles in Summer

How to reset the tire pressure warning in the TACQUA?

What is the horsepower of the Kawasaki Z650?

Why Won't the Volkswagen T-Roc's Wiper Move?

How much does the Aolong 8x4 truck weigh?

What is the warranty for the Neta V?

Does the Mercedes Vito Fuel Pump Require Removing the Fuel Tank?

What is the normal tire pressure range for Haval M6 in summer?