What is the reason why the Nissan Tiida does not move when shifting to D gear when the car is cold?

1 Answers
LeJasper
07/29/25 8:07pm
The reason why the Nissan Tiida does not move when shifting to D gear when the car is cold is due to the low temperature of the coolant in the cooling system and the lubricating oil in the lubrication system. Introduction to the Nissan Tiida: Tiida (Tiida) is named after the meaning of a swift horse, further interpreted as a swift horse traveling a thousand miles and galloping swiftly. Although it is 190 millimeters shorter than the Yida, this seems to add more agility to the car, without compromising the interior space. Power performance of the Nissan Tiida: The fuel consumption is only 5.6l/100km, which is 20% lower than that of engines with the same displacement. At the same time, it adopts aviation lightweight aluminum alloy manufacturing technology, reducing the weight by nearly 30% compared to engines of the same class, enabling the 1.6l engine to achieve higher technical standards in terms of torque (153n/4400m), output power (80kw/rpm), and fuel consumption (5.6l/100km).
Was this review help?
19
2
Share
More Forum Discussions

Where is the rear sunroof drain outlet located on the Volkswagen Tiguan?

The sunroof drain outlet of the Volkswagen Tiguan is located on the lower inner side of the A-pillar. Introduction to Car Sunroof: Car sunroofs are installed on the roof, effectively facilitating air circulation inside the vehicle and increasing the intake of fresh air. Additionally, car sunroofs can broaden the field of vision and meet the needs for mobile photography and videography. Functions of Car Sunroof: Car sunroofs alter the traditional method of air exchange. Wind entering through the sunroof creates a current that draws out stale air from the cabin. When driving at high speeds, air flows rapidly around the vehicle. Opening the sunroof creates a low-pressure area outside the car, and the difference in air pressure between the inside and outside of the vehicle helps to extract the stale air, achieving air exchange and ensuring the cabin remains filled with fresh air, enhancing the driving experience.
14
3
Share

How many liters of brake fluid does a BMW 320li require?

BMW 320li requires one liter of brake fluid. Brake fluid replacement cycle: Generally, it is recommended to replace brake fluid every 2 years, but this cycle can vary depending on usage. The official maintenance cycles for brake fluid replacement differ among various car brands, which is related to the brand of brake fluid and the vehicle model. Brake fluid has certain corrosive properties and strong water absorption. It is essential to replace brake fluid regularly when it reaches the maintenance time, and it is best to follow the maintenance cycle specified by the manufacturer. Function of brake fluid: Brake fluid is also known as automotive brake fluid. Early cars used mechanical drum brakes. With the development of hydraulic technology, safe and reliable hydraulic braking systems are widely used in automobiles. Automotive brake fluid is the liquid used in the hydraulic braking system of a car. When the driver steps on the brake, the force applied to the pedal is transmitted by the piston of the master cylinder through the brake fluid to the wheel cylinders, causing the friction pads to expand and stop the vehicle.
9
1
Share

What is OnStar Idle Duration?

Idle time refers to the duration required for idling, and prolonged idling can cause damage to the engine. Normal Idle Introduction: When the vehicle is in a parked state and the engine is started, the minimum stable operating speed of the engine is referred to as parking idle (the process during which the engine transitions from a cold idle state to an idle state at normal operating temperature is called warming up or heating the engine). Driving Idle Introduction: During gear shifting, if the accelerator pedal is not pressed or is released while driving, maintaining the minimum throttle opening, the engine speed matches the parking idle speed. This state is referred to as driving idle.
3
5
Share

How Long Does It Take for the New Highlander to Accelerate?

The Highlander's 0-100 km/h acceleration time is 8.85 seconds, 0-60 km/h acceleration time is 3.94 seconds, and it takes 6.9 seconds to accelerate from 80 km/h to 120 km/h. Introduction to 0-100 km/h Acceleration: 0-100 km/h acceleration refers to the time it takes to accelerate from 0 to 100 kilometers per hour, which is the most intuitive reflection of a car's power. 0-100 km/h Acceleration Test: Manufacturers usually indicate the official 0-100 km/h acceleration time in the vehicle's promotional materials, but the actual test results often differ from the official figures. This is because different environmental temperatures, road conditions, vehicle wear, and even the amount of fuel remaining in the tank can affect the test results, so there are no two identical acceleration test results.
11
5
Share

What causes the failure of the rear door window regulator switch in the Baojun 630?

The failure of the rear door window regulator switch in the Baojun 630 is due to the sticking of the motor carbon brushes. The ultimate solution is to replace the entire motor assembly. Composition of the electric window regulator: Electric window regulators are mostly composed of a motor, reducer, guide rope, guide plate, and glass mounting bracket. Depending on the material or manufacturing process of the guide rope, they are further divided into three types: cable pulley type, flexible shaft type, and plastic type electric window regulators. The first two types use steel wire ropes as guide ropes, while the latter uses plastic belts as guide ropes. Taking the commonly used cable pulley type electric window regulator as an example, it consists of components such as a motor, reducer, steel wire rope, guide plate, and glass mounting bracket. During installation, the door window glass is fixed on the glass mounting bracket, and the glass guide channel is parallel to the steel wire rope guide plate. Usage of the window regulator: When the motor is activated, the motor drives the reducer to output power, pulling the steel wire rope to move the glass mounting bracket, thereby forcing the door window glass to move up or down in a straight line. The plastic belt type electric window regulator uses a plastic belt as the guide rope, with holes on the belt for moving and positioning the plastic belt to control the up and down movement of the door window glass.
19
5
Share

What are the hidden functions of the Changan V7 key?

Changan V7 key has the following hidden functions: Unlocking: The remote key generally unlocks all four doors. If you press both the unlock and lock buttons simultaneously for 4 seconds, the unlock button will only open the driver's door. Press it again to unlock the other doors. Lighting: The "Follow Me Home" function: After turning off the engine without removing the key, the lights will cycle through off - parking lights - low beams - off in one go. Then you can remove the key, exit the car, lock it, and leave. The car will illuminate the road for one minute. If you need to take something from the car, as long as one door (including the trunk) remains open, the lights will stay on for three minutes. Vehicle Locator: Press the lock button twice consecutively to activate the sound and hazard light indicators for locating your vehicle. Window Control: In addition to one-touch up/down, the driver's window can be lowered halfway by pushing the control switch forward.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.