What is the reason why the light above the rear seat of the Golf car cannot be turned off?

Why does the car shake when starting?

Car shaking during startup can be attributed to the following reasons: During a cold start, the internal operating resistance of the engine is very high, so the ECU injects more fuel, which can cause some shaking. When the oxygen sensor hasn't reached its operating temperature during a cold start, it can also lead to engine shaking. If the engine has a misfire (missing cylinder), it disrupts the smooth operation of the engine, resulting in shaking during a cold start. Some engines are particularly prone to carbon buildup; excessive carbon deposits in the engine can also cause shaking during a cold start. After a cold start, the engine temperature is relatively low. To quickly bring the engine up to operating temperature, the ECU controls the fuel injection system to inject more fuel, which can cause some shaking. This is normal.

13

3

Share

How to replace the air conditioning filter of Emgrand GS?

Emgrand GS air conditioning filter replacement method: First open the glove box, pull down the small hook on the right side, then squeeze both sides of the glove box inward to remove it. Release the clips on both sides to pull it out, remove the filter frame, and install the new filter. The air conditioning filter is a filter installed in the car's air conditioning system, which can absorb dust particles, reduce respiratory pain, minimize irritation for allergy sufferers, and protect the air conditioning cooling system. The body dimensions of the Emgrand GS are 4440mm in length, 1833mm in width, and 1560mm in height, with a wheelbase of 2700mm.

12

1

Share

Where is the BMW's cabin air filter located?

There are two cabin air filters in a BMW. One is located under the glove box, secured by four screws. Removal requires lighting tools and is quite challenging—the process of removing the air filter is complicated, so it's best to have it replaced by a technician at a repair shop. The other filter is located in the engine compartment, near the wipers. The cabin air filter tends to accumulate a lot of dust, which can be blown away with compressed air—never wash it with water, as this can easily ruin it. Over time, the activated carbon filtration function of the cabin air filter diminishes, so it needs to be replaced periodically. The BMW 5 Series has body dimensions of 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm.

5

0

Share

How to Set the Time on Peugeot 308?

Peugeot 308 time setting method: Press and hold the adjustment lever for more than two seconds until the time starts flashing. First adjust the hour by quickly pressing and releasing the lever—each press increases the time by one hour. After setting the hour, wait until the minutes start flashing, then press and hold the lever to adjust the minutes in the same way. The Peugeot 308 has body dimensions of 4590mm in length, 1820mm in width, and 1488mm in height, with a wheelbase of 2675mm. In terms of power, the Peugeot 308 offers 1.6L, 1.2T, and 1.6T engine options, with maximum power outputs of 86 kW, 100 kW, and 123 kW respectively. The transmission options include a 5-speed manual and a 6-speed automatic. The 6AT transmission is sourced from Aisin and provides four driving modes: Normal, Manual, Sport, and Snow.

18

1

Share

What is the ground clearance of the 14th generation Nissan Sylphy?

The ground clearance of the 14th generation Nissan Sylphy is 110mm. The ground clearance of a car refers to the minimum ground clearance, which is the distance between the car's chassis and the supporting ground when the car is fully loaded or in a stationary state, excluding the wheels. Every car has a minimum ground clearance. The 14th generation Nissan Sylphy is a compact sedan launched by Nissan. The body dimensions of the 14th generation Nissan Sylphy are 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm.

6

1

Share

How to Align the Timing Belt on a Buick Excelle?

The Buick Excelle engine's timing belt and pulleys or sprockets have alignment marks that should be aligned during assembly. However, to ensure correct assembly, it is best to use professional tools to align the white marks on the gears, especially since the camshaft can easily become misaligned when installing the timing belt. The timing belt is a crucial component of the engine's valve timing system, connecting to the crankshaft and maintaining precise intake and exhaust timing through a specific gear ratio. Belts are used instead of gears for transmission because they produce less noise, have minimal self-variation, and are easier to compensate for. The lifespan of a belt is shorter than that of metal gears, so it must be replaced regularly. The Buick Excelle's body dimensions are 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm.

6

4

Share

What is the reason why the light above the rear seat of the Golf car cannot be turned off?

Why does the car shake when starting?

How to replace the air conditioning filter of Emgrand GS?

Where is the BMW's cabin air filter located?

How to Set the Time on Peugeot 308?

What is the ground clearance of the 14th generation Nissan Sylphy?

How to Align the Timing Belt on a Buick Excelle?

Bought a motorcycle but don't know where to park it?

What is the ground clearance of the Accord?

What is the Hyundai Verna?

Is it easy to pass the annual inspection if you go by yourself?