What is the reason why the JAC Shuailing EPC light is on and the car cannot run?

2 Answers
LeJayden
07/25/25 1:21am
The reason why the JAC Shuailing EPC light is on and the car cannot run is either a system failure or running out of fuel. Refueling in the city: Refueling is relatively convenient, as gas stations are no more than 30 kilometers away. It's best to refuel when the fuel gauge light comes on. Although there is no unified standard for when this light turns on, there is a general range. Typically, it is around 7-10 liters. For example, the Volkswagen Passat is about 9 liters, the Honda Accord is 10.3 liters, and the Civic is 7.5 liters. If the fuel level is below this amount, the fuel gauge light will illuminate. Low fuel level: When the fuel level is only 1-2 liters, it can affect fuel supply. This is because when the vehicle is moving, vibrations or tilting can cause the fuel to slosh around, which poses a certain risk.
Was this review help?
6
3
Share
OJulia
08/10/25 4:07pm
Speaking of the JAC Shuailing EPC light coming on and the vehicle losing power, I've driven this model and encountered similar issues, usually caused by electronic power control problems. Common reasons include severely dirty throttle bodies clogging the intake passage, leading to sluggish throttle response; faulty throttle pedal sensors sending incorrect signals, causing the ECU to mistakenly limit power output; or aging and short-circuited wiring affecting current transmission. If not addressed promptly, the vehicle will continue to suffer from poor acceleration, posing high safety risks. I remember last time cleaning the throttle body cost less than 300 yuan to fix, but delaying repairs might damage the spark plugs and increase repair costs. It's recommended to stop the engine and wait a while before trying again; if the issue persists, head to a repair shop promptly for diagnosis to avoid pushing the vehicle on steep slopes or highways. Fellow drivers suggest regular maintenance as a preventive measure—cleaning the air filter yourself once a month is sufficient.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What are the reasons for the BYD F3 remote control light flashing but the door lock not moving?

There are several reasons why the BYD F3 key remote control light flashes but the door lock does not move: 1. Key control module failure: If the time control module in the remote key fails, the remote control will not work. 2. Antenna aging: Due to reasons such as the aging of the vehicle's remote transmitter antenna, this situation can also occur. In such cases, you can go to a repair station for inspection and repair. 3. Sun exposure issue: After applying an explosion-proof sun film to the front windshield, when remotely unlocking the car from the front, the remote door lock may not respond. This is because the explosion-proof sun film can partially block the remote signal.
6
2
Share

Where is the cabin air filter of Haima S5 located?

Haima S5's cabin air filter is located in the engine compartment. The cabin air filter can filter out pollen and dust inhaled by the air intake system and air conditioning system from the outside. Replace the cabin air filter according to the vehicle's recommended maintenance schedule. If the vehicle is often driven in a dusty environment, it is recommended to replace the cabin air filter earlier. Haima S5 is an SUV with high reliability and stability, equipped with the Moofun mobile interconnection human-vehicle ecosystem and the intelligent voice interaction system from iFLYTEK, providing consumers with an all-weather intelligent service mode. It features a million-pixel ultra-clear 360-degree follow-up 3D image, EPB, Auto Hold automatic parking system, and ultra-clear driving recorder.
4
1
Share

Where is the headlight washer switch on the Ford Focus?

The headlight washer switch on the Ford Focus is located on the wiper control lever to the right of the steering wheel. After starting the engine and turning on the low beams or high beams, press and hold the wiper lever toward the steering wheel for 5 seconds to activate the headlight washer. The headlight washer system features a water outlet below the headlights, allowing you to clean dust and dirt from the headlights at any time. The Ford Focus is a compact family car produced by Ford, equipped with a 1.6L TiVCT engine and a more powerful 2.0GDI gasoline direct injection engine. The 1.6L engine features a Twin Independent Variable Camshaft Timing (TiVCT) system, delivering stronger performance and better fuel efficiency, with a maximum power output of 125 horsepower and a peak torque of 159 Nm.
2
2
Share

How to Turn Off the Engine Auto Start-Stop in Santa Fe?

The method to turn off the engine auto start-stop in Santa Fe is: press the button with a circle containing an 'A' and a notch, located next to the gear shift. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) and restarts it when it's time to move forward again. Taking the Santa Fe 2020 380TGDi Automatic Two-Wheel Drive DLX Premium PLUS as an example, it is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 230 PS, a maximum power of 169 kW, and a maximum torque of 353 Nm, paired with an 8-speed automatic transmission.
5
4
Share

Will the vehicle slow down by itself after a tire blowout?

For most vehicles, after a tire blowout, the steering will become heavier and deviate. At this point, sudden braking can lead to serious consequences. Whether the vehicle slows down or not depends on the throttle. More information about car tires is as follows: 1. Overview: Car tires are one of the important components of a vehicle, directly in contact with the road surface. Together with the car suspension, they mitigate the impacts encountered during driving, ensuring good ride comfort and smooth driving. 2. Function: They ensure good adhesion between the wheels and the road surface; improve the vehicle's traction, braking, and off-road capability; and bear the weight of the car. The important role tires play in vehicles is increasingly being recognized by people.
14
0
Share

What is the sequence of clutch and brake for hill start parking?

For hill start parking, press the brake first and then the clutch. Upon hearing the instruction: Turn on the right turn signal, steer the wheel appropriately to the right, allowing the vehicle to move slowly and straight along the right side of the road, while paying attention to the distance between the vehicle body and the right sideline. Approaching the target: When the vehicle is about 10 meters away from the parking pole, approach the designated target slowly, accurately, and steadily. Determining the target: Use a point on the parking pole and the windshield (or hood) as a reference. When visually aligning a point on the windshield with the parking pole, indicating that the vehicle's bumper is aligned with the parking pole line, stop immediately.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.