What is the reason why the Geely Boyue cannot start after replacing the battery?

1 Answers
MacTyler
07/29/25 9:03pm
The reason why the Geely Boyue cannot start after replacing the battery may be due to a circuit problem, which prevents normal power supply. It is recommended to go to a 4S shop for inspection. Precautions for battery charging: In idle state, the time is relatively long, and it is easy to produce carbon deposits, so it is not recommended to use. Driving for more than one hour can basically fully charge the battery. Introduction to car batteries: The lifespan of a car battery is generally around 2 to 3 years. The lifespan of the battery is mainly related to the driving conditions, road conditions, and the driver's habits. During daily use, try to avoid using vehicle electrical equipment when the engine is not running; if the vehicle is parked for a long time, the battery must be disconnected; if the vehicle is frequently driven short distances, it is necessary to drive out on the highway regularly or use an external device to charge the battery periodically.
Was this review help?
12
5
Share
More Forum Discussions

Is the Nissan Tiida a four-wheel drive vehicle?

Nissan X-Trail has four-wheel drive models. The Nissan X-Trail is a compact SUV under the Nissan brand. The dimensions of this car are 4675 mm in length, 1820 mm in width, and 1722 mm in height, with a wheelbase of 2706 mm. The Nissan X-Trail is equipped with two types of engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The role of the four-wheel drive system: Cars equipped with a full-time four-wheel drive system have power distributed to all four wheels at all times. The full-time four-wheel drive system can enhance the mechanical grip of the wheels, and improved grip can also enhance the car's handling. Limitations of the four-wheel drive system: Part-time four-wheel drive relies on operating the transfer case to switch between two-wheel drive and four-wheel drive. Since the transfer case does not have a central differential, part-time four-wheel drive vehicles cannot use four-wheel drive on hard surfaces (paved roads).
13
3
Share

Where is the brake light switch on the new Mondeo?

The brake light switch is located above the brake pedal, where a spring contact presses against the connecting rod of the brake pedal. The protective cover is the base plate above the brake, clutch, and accelerator pedals, secured by three self-tapping screws, with two plastic clips supporting it inside. Function of the brake light: Brake lights are generally installed at the rear of the vehicle, with the main color being red to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the vehicle in front is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. Consequences of a burnt-out brake light: If the brake light burns out, it may result in the brake light staying on constantly, not lighting up at all, or flickering intermittently. In severe cases, the car's computer may mistakenly interpret that the driver is braking when there is no actual braking action, leading to increased fuel consumption and issues such as failure of the cruise control system.
20
0
Share

What is the speed range of Audi's ACC adaptive cruise control?

Audi's ACC adaptive cruise control can be set within a speed range of 30-200 km/h. When the speed is below 30 km/h, the instrument panel will display that the speed is too slow, and the cruise system cannot be activated normally. Adaptive Cruise Control System: The adaptive cruise control system is an intelligent automatic control system. During vehicle operation, the distance sensor (radar) installed at the front of the vehicle continuously scans the road ahead, while the wheel speed sensors collect vehicle speed signals. It is recommended to have it installed at an authorized 4S dealership. Function of Adaptive Cruise Control: Through feedback signals from the distance sensor, the ACC control unit can assess road conditions based on the movement speed of nearby objects and control the vehicle's driving state. By sensing the force applied by the driver on the feedback-type accelerator pedal, the ACC control unit can determine whether to execute cruise control to reduce driver fatigue.
10
3
Share

Where is the tow hook on the Haval M4?

The tow hook on the Haval M4 is located behind a small plastic cover on the front bumper of the rear of the vehicle. Prying open this cover reveals the installation point for the tow hook and tow rope. Correct towing operation: Locate the tow hook positions at the rear of the towing vehicle and the front of the towed vehicle. Some vehicles have split-type tow hooks that require assembly before use. After removing the cover on the bumper, assemble the hook that comes with the vehicle. Install the towing equipment. The towing vehicle should start in first gear to ensure sufficient torque for adequate pulling force, while also controlling speed to maintain smooth driving. Increase power output when slight resistance is felt. For manual transmission vehicles, avoid abruptly releasing the clutch pedal; instead, use the half-clutch method for a slow start to prevent damage to the vehicle. Meaning of tow hook: The tow hook, also known as the tow ring, can be referred to by either name, such as vehicle tow hook or towing tow ring, etc. It is generally placed at the very front of the tow vehicle and serves the purpose of towing the vehicle body.
9
1
Share

What causes the squeaking noise from the suspension when starting a Volkswagen CC?

The reason for the squeaking noise from the suspension when starting a Volkswagen CC is due to damage, deformation, or detachment of the brake shoe support plate, damping spring plate, or guide plate of the disc brake. This causes an increase in the clearance between the brake shoe and the brake caliper support frame in all directions, leading to mutual impact and resulting in the noise. Introduction to the automotive suspension system: The automotive suspension system refers to the entire support system composed of springs and shock absorbers between the body and the tires. The functions of the suspension system include supporting the body and improving ride comfort. Different suspension setups provide drivers with varying driving experiences. Although seemingly simple in appearance, the suspension system integrates multiple forces and determines the stability, comfort, and safety of the vehicle, making it one of the most critical components in modern cars. Functions of the suspension system: The suspension system is the general term for all force-transmitting connection devices between the car's frame and the axle or wheels. Its role is to transmit forces and torques acting between the wheels and the frame, while also cushioning the impact from uneven road surfaces transmitted to the frame or body and dampening the resulting vibrations to ensure smooth driving.
18
3
Share

What is the actual fuel consumption of the Mercedes-Benz V260L?

The actual fuel consumption of the Mercedes-Benz V260L is approximately 9.5L per 100 kilometers. The following factors affect fuel consumption: Road potholes: If the road is congested or uneven, driving in low gear for a long time will inevitably increase fuel consumption. Incorrect driving: Improper driving habits have the greatest impact on fuel consumption. Behaviors such as slamming on the brakes, fluctuating speeds, prolonged engine idling, aggressive acceleration, and long-distance driving at high speeds in low gear can all lead to increased fuel consumption. Prolonged idling: Compared to normal driving, the engine ECU controls more fuel injection when the car is idling or just started. If the engine is not turned off or frequently idles for long periods, fuel consumption will increase.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.