···
Log in / Register

What is the reason why the car fog lights cannot be turned off?

4 Answers
AliceLynn
09/01/25 4:20am

The front fog lights may remain on and cannot be turned off due to poor contact in the front fog light circuit or possible short circuits. It is necessary to have it checked as soon as possible to avoid affecting other circuits. Definition of fog lights: Car fog lights are installed at the front and rear of the vehicle, used for illuminating the road and providing safety warnings during rainy or foggy weather conditions. They enhance the visibility for both the driver and other traffic participants. Purpose of fog lights: The function of fog lights is to make the vehicle visible to others in conditions of reduced visibility, such as fog or heavy rain. Therefore, fog light sources need to have strong penetration. Most vehicles use halogen fog lights, while LED fog lights are considered more advanced.

Was this review help?
16
1
Share
VanAvery
09/13/25 7:05am

I've been driving for nearly twenty years and have encountered issues with fog lights that won't turn off. There are usually several common causes. The switch might be stuck or worn out, causing the rotary knob to malfunction. The relay is another critical component—if its contacts are stuck together, current will continue to flow, keeping the fog lights on. Wiring issues could also be to blame, such as a short circuit or broken wire, like when rodents chew through cables or connectors oxidize. I remember one time when moisture got into the switch after heavy rain, causing the lights to stay on. Another easily overlooked cause is a faulty control module. Modern cars have ECUs, and if the software glitches, the fog lights might go haywire. Safety comes first—fog lights that won’t turn off can drain the battery and confuse other drivers. Check the fuses right away, and if that doesn’t work, take it to a professional repair shop. Don’t force a fix yourself, or you might end up with bigger problems.

Was this review help?
13
2
Share
Expand All
SanKayden
10/27/25 7:53am

As someone with some knowledge about vehicles, I believe that fog lights that won't turn off are mostly due to electrical system issues. The most common problem is a faulty switch, where internal mechanical parts get stuck or contacts burn out. Relay failure is also highly likely - relays are responsible for opening and closing circuits, and if the coil is damaged or contacts fuse together, the fog lights stay powered. Wiring issues like short circuits can allow current to bypass the switch and not follow the normal path. Then there's the control modules in modern cars - if the ECU receives incorrect signals, it may keep the fog lights on. For inspection, check the fuse box to confirm if any fuses are blown; using simple tools like a multimeter to test circuit continuity is most convenient. I recommend regular maintenance of electrical components and prompt technician inspection when issues arise to prevent safety hazards from worsening.

Was this review help?
7
4
Share
Expand All
Pires
12/10/25 8:09am

I just started learning to drive recently and got a bit nervous when the fog lights wouldn't turn off. Maybe I pressed the wrong switch position - some car fog light buttons have complex designs that can easily confuse the modes. Or perhaps the switch itself is broken and the button won't press down. A loose wiring connection could also prevent the signal from transmitting. When the battery is severely drained, the system may malfunction, causing the fog lights to turn on automatically and stay on. Check the user manual for the correct operating procedure, try restarting the vehicle, and if that doesn't work, contact professional technicians at the 4S shop. As a beginner, don't force it to avoid making mistakes.

Was this review help?
11
0
Share
Expand All
More Forum Discussions

how long can a car be used

A well-maintained modern car can reliably last 200,000 miles or more , with many reaching 300,000 miles and beyond. The ultimate lifespan isn't defined by a single expiration date but by a combination of factors including maintenance habits, driving conditions, and the vehicle's inherent build quality. The key to maximizing your car's life is consistent, proactive care rather than waiting for problems to arise. The single most critical factor is adhering to the manufacturer's recommended maintenance schedule . This includes regular oil changes, fluid flushes, and replacing wear-and-tear items like brakes and tires. Neglecting these services leads to accelerated component wear, reducing the vehicle's overall lifespan significantly. Environmental factors play a huge role. Cars in regions that use road salt during winter are highly susceptible to rust and corrosion , which can structurally compromise a vehicle long before its mechanical parts wear out. Conversely, a car kept in a dry, moderate climate has a major advantage. Modern vehicles are engineered for greater longevity than their predecessors. Advances in engine technology, corrosion-resistant materials, and synthetic lubricants all contribute. However, complex electronics and infotainment systems can become outdated or fail, presenting a different kind of "end-of-life" scenario. Here’s a realistic look at potential milestones based on maintenance: Mileage Milestone Typical Condition & Common Needs 100,000 miles Well-maintained; may need new spark plugs, coolant flush, suspension components. 150,000 - 200,000 miles Critical point; timing belt replacement is essential. Transmission service needed. 200,000 - 300,000 miles Major components like the transmission or fuel pump may require rebuilding/replacement. 300,000+ miles Testament to excellent care; expect ongoing repairs, but the car can remain functional. Ultimately, the decision to retire a car is often economic. When the annual cost of repairs exceeds the car's value or a yearly payment on a new car, it's often the practical endpoint.
8
3
Share

how many tesla cars burned

The number of Tesla vehicles that have caught fire is extremely low compared to the total number on the road and to fires in gasoline-powered cars. Based on data from the National Fire Protection Association (NFPA) and Tesla's own reports, the incidence of fire is statistically rare. The focus should be on the context: these events are newsworthy precisely because they are uncommon. The most reliable data often comes from reports by safety bodies like the NTSB (National Transportation Safety Board) and from Tesla's Vehicle Fire Data. For example, from 2012 to 2021, Tesla reported an average of one fire for every 210 million miles traveled in its vehicles. In comparison, the NFPA reports that gasoline cars experience one fire for every 19 million miles traveled. This suggests Tesla vehicles are over 10 times less likely to catch fire. Data Point Tesla Vehicles Gasoline Vehicles (U.S. Average) Fires per billion miles traveled Approximately 5 Approximately 53 Primary cause of fires High-speed impact damaging battery pack Fuel leaks, electrical shorts, overheating Fire behavior Can be intense and require large amounts of water to extinguish Typically faster initial ignition Data Source Tesla Vehicle Fire Data, NTSB reports National Fire Protection Association (NFPA) It's important to understand why these fires occur. Most Tesla fires are the result of high-speed collisions that severely compromise the lithium-ion battery pack. Unlike a gas tank, a battery pack contains thousands of individual cells; if damaged, they can enter a state called "thermal runaway," where one cell overheating causes adjacent cells to overheat. While manufacturers have built rigorous safety systems to prevent this, extreme force can overcome them. The key takeaway is that the risk is minimal for daily driving and is significantly lower than the fire risk associated with conventional cars.
5
5
Share

how much is a hydrogen car

A new hydrogen fuel cell vehicle (FCEV) currently carries a sticker price typically between $50,000 and $60,000 before any incentives. However, due to high upfront costs and limited hydrogen refueling infrastructure, most people don't buy them outright. The more common and financially accessible path is through a lease , which often includes a generous hydrogen fuel card for the lease term, covering your fuel costs. The price is significantly higher than a comparable battery-electric or gasoline vehicle because the technology is still in its early commercial stages. The fuel cell stack itself, which combines hydrogen with oxygen to produce electricity, is complex and expensive to manufacture. Vehicle Model Approximate MSRP Key Purchase Consideration Toyota Mirai Starts around $50,000 Often available with a $15,000 fuel card on purchase or included in leases. Hyundai Nexo Starts around $60,000 Leasing is strongly emphasized, typically including up to $13,000 in hydrogen fuel credits. Honda CR-V e:FCEV Expected mid-$60,000s New plug-in hybrid FCEV; lease-only initially with a $15,000 fuel card for 6 years. While federal and state incentives (like a potential $7,500 federal tax credit) can lower the effective cost, the real challenge is the Total Cost of Ownership . Hydrogen fuel prices are volatile and often high, sometimes equivalent to paying over $16 per gallon of gasoline, making the included fuel card in a lease critical. Your decision ultimately hinges on living near reliable hydrogen stations, as the infrastructure is currently concentrated almost exclusively in California.
17
3
Share

how hot do car engines get

A car engine's normal operating temperature typically ranges from 195°F to 220°F (90°C to 105°C) , measured by the coolant temperature. However, internal combustion chamber temperatures can exceed 4500°F (2500°C) during operation. The key is managing this intense heat to prevent damage. The cooling system's job is to maintain that ideal 195-220°F window. If the coolant temperature rises above 230-250°F (110-120°C) , the engine is overheating, which can lead to serious damage like a warped cylinder head or a blown head gasket. Different parts of the engine experience vastly different temperatures. The exhaust gas exiting the cylinders can be over 1400°F (760°C) , which is why exhaust components glow red-hot. Modern engines are designed to run hot for efficiency and lower emissions, but they rely on a fully functional cooling system—including the radiator, water pump, and thermostat—to keep everything in check. Vehicle Component / Measurement Typical Temperature Range Normal Coolant Temperature 195°F - 220°F (90°C - 105°C) Engine Oil Temperature (Optimal) 210°F - 230°F (100°C - 110°C) Overheating Threshold (Coolant) 230°F+ (110°C+) Exhaust Gas Temperature (at manifold) 1200°F - 1600°F (650°C - 870°C) Internal Combustion Chamber Peak 4500°F+ (2500°C+) Catalytic Converter Surface 300°F - 600°F (150°C - 315°C) Turbocharger Housing (under load) 1000°F+ (540°C+) If your temperature gauge needle moves consistently into the red zone, it's a critical warning. Pull over safely, turn off the engine, and let it cool down completely before attempting to check coolant levels to avoid injury.
3
3
Share

how much does f1 car weigh

The minimum weight of a modern Formula 1 car, including the driver but not the fuel, is 798 kilograms (approx. 1,759 lbs) as per the 2024 FIA technical regulations. This figure represents the total mass the teams must achieve for the car to be legal at the start of a race. However, the car will be heavier at the beginning of the race due to the fuel load, which can add over 100 kg. Achieving this minimum weight is a constant battle for engineers. The chassis, power unit, and all components are made from advanced, lightweight materials like carbon fiber composites and titanium. Every gram saved allows teams to add ballast—small, heavy weights—to strategically position around the car. This ballast placement is critical for fine-tuning the car's weight distribution and center of gravity , which directly impacts handling, tire wear, and cornering performance. The weight limit has increased significantly over the years, primarily due to the introduction of heavier hybrid power units and new safety components like the Halo driver protection system. While heavier cars can be slightly less agile, the regulations ensure a level playing field and prioritize driver safety. Here is a breakdown of the key weight components: Component Estimated Weight Contribution Notes Chassis (Monocoque) ~ 90 kg (198 lbs) Carbon fiber composite, includes Halo Power Unit (ICE + Hybrid) ~ 150 kg (330 lbs) Internal Combustion Engine & ERS Gearbox ~ 40 kg (88 lbs) Includes casing and internals Driver & Seat ~ 80 kg (176 lbs) Minimum driver weight is 80kg; lighter drivers need ballast Fuel Load (Start of Race) ~ 100 kg (220 lbs) Varies by race strategy Wheels & Tires (Set of 4) ~ 21 kg (46 lbs) Ballast Variable Used to reach the 798kg minimum
2
2
Share

how hot can a car hood get

A car hood can get extremely hot, reaching temperatures between 190°F and 200°F (88°C to 93°C) from engine heat alone on a typical day. However, when exposed to direct sunlight, the surface temperature can soar much higher, easily exceeding 140°F (60°C) and potentially reaching 180°F (82°C) or more, depending on the hood's color and material. This level of heat can cause serious burns in seconds. The primary source of hood heat is the engine. As the engine runs, it generates immense thermal energy, which is radiated upwards. The underhood temperature can be significantly hotter than the exterior surface you touch. A dark-colored hood acts like a sponge for solar radiation, absorbing more heat from the sun than a light-colored one. This is why a black car will always have a hotter hood than a white car under identical conditions. The material of the hood also plays a role. While most modern hoods are made of steel or aluminum, some high-performance or luxury vehicles use carbon fiber or composite materials, which may have different insulating properties. Scenario Estimated Hood Surface Temperature Key Influencing Factors Engine Running, Cool Day (70°F / 21°C) 150°F - 170°F (66°C - 77°C) Engine temperature, driving duration Parked in Direct Sunlight, Hot Day (95°F / 35°C) 160°F - 180°F (71°C - 82°C) Ambient temperature, solar radiation, hood color After High-Performance Driving 200°F+ (93°C+) Engine load, turbocharger heat, exhaust manifold proximity With a Hood Insulator/Blanket 20°F - 40°F (11°C - 22°C) Cooler Quality and type of insulation material It's crucial to be cautious. A surface temperature of 140°F (60°C) can cause a severe burn in just five seconds of contact. Before leaning on or touching your hood, especially after driving or on a sunny day, place your hand a few inches away to feel for radiating heat. If you feel significant warmth, it's too hot to touch safely.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.