What is the reason why the BYD Qin hybrid cannot engage the gear?

2 Answers
StLilliana
07/29/25 12:18am
BYD Qin hybrid cannot engage the gear due to a clutch failure, and severe slipping should be checked. The working process of the clutch includes the following three points: 1. Working process: The diaphragm spring is installed between the clutch cover and the pressure plate, creating a pre-compression deformation that generates pressure on the pressure plate, pressing the driving and driven parts of the clutch together, i.e., the clutch is in the engaged state. 2. Disengagement process: When the clutch pedal is pressed, the pedal moves left, the push rod moves left, and the cylinder and working cylinder push the diaphragm spring separation plate to move left. As a result, the diaphragm spring uses the support pin fixed on the clutch cover as a pivot to move the large end to the right while pulling the pressure plate to the right through the action of the separation plate. 3. Engagement process: When the clutch pedal is released, the pedal returns to its original position. The movement of the control mechanism during engagement is the reverse of the disengagement process. When a reserved gap appears between the release bearing and the diaphragm spring separation plate and the diaphragm spring presses the pressure plate tightly against the driven plate again, the engagement process ends, and the clutch resumes its power transmission function.
Was this review help?
7
0
Share
StDaniela
08/12/25 4:33am
I've been driving the BYD Qin hybrid for almost three years, and recently encountered the issue of gear lock-up. During rush hour after work, I couldn't shift into D gear at all—the gear lever wouldn't budge. Later, the 4S店 diagnosed it as a software malfunction in the transmission control module triggering self-protection. The hybrid's dual-clutch system is sensitive to voltage, and insufficient battery power or sensor false alarms can activate the electronic lock. The technician taught me a temporary solution: turn off the engine, wait a few minutes, and restart to temporarily resolve the issue. Honestly, the powertrain in the BYD Qin is quite efficient, but with more electronic components come more minor issues, especially in older models where software hasn't been updated, making them prone to bugs. Now, I regularly check the battery life and system version—it's not worth skimping on these costs. Dragging out gear issues can damage the transmission and increase safety risks. If it happens suddenly on the road, turn on the hazard lights and pull over immediately—safety first.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

Where is the engine number located on an Iveco?

The engine number on an Iveco is located above the diesel pump on the left side of the engine. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work. Iveco's models include: Iveco Ouba, Iveco Daily, Iveco Eurocargo, Iveco Venice Trip, Iveco Baodi, etc. Taking the 2020 Iveco Daily as an example, its body dimensions are: length 4850mm, width 2000mm, height 2180mm, wheelbase 2800mm, fuel tank capacity 70l, and curb weight 2090kg.
10
0
Share

What is the recommended interval for wheel alignment?

The recommended interval for wheel alignment is once a year or every 10,000 to 20,000 kilometers. Situations that require wheel alignment include: 1. Damage to the chassis and suspension caused by an accident; 2. Replacement of the steering system or its components; 3. Unilateral wear on the front or rear tires; 4. Replacement or adjustment of the suspension system. Wheel alignment involves adjusting the geometric angles of the tires, steering, and suspension components to ensure tight contact between the tires and the ground. The steps for performing a wheel alignment are: 1. Connect the power and turn on the machine; 2. Attach the target to the wheels, with the target facing the camera; 3. Click to enter the measurement program on the computer page; 4. Open the camera to confirm if the target is correctly positioned, and adjust if necessary; 5. Click to measure and follow the prompts to obtain the measurement data; 6. Adjust the total toe data of the vehicle to the standard green range.
10
2
Share

Where is the computer connector of Huansu S3 located?

The computer connector of Huansu S3 is located under the glove box on the passenger side. Move the passenger seat backward to see it. Taking the 2018 Huansu S3 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4380mm in length, 1730mm in width, and 1760mm in height, a wheelbase of 2685mm, a fuel tank capacity of 55 liters, and a curb weight of 1335kg. The front suspension of the 2018 Huansu S3 is a MacPherson independent suspension, and the rear suspension is a five-link rear suspension. It is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 113PS, a maximum power of 83kW, and a maximum torque of 150Nm, paired with a 5-speed manual transmission.
18
0
Share

What are the reasons for the starter's failure to operate?

The reasons for the starter's failure to operate are: 1. Severe battery depletion, sulfation, short circuit, or damage to the main power switch; 2. Loose or poor contact of terminal post wires; 3. Loose or detached engine grounding wire; 4. Poor contact between the commutator and brushes or grounding of insulated brushes; 5. Damage to the field winding or armature winding; 6. Open circuit in the pull-in coil or hold-in coil of the electromagnetic switch, or poor contact of the switch contact disc. The method for direct starting of the starter is: 1. The starting time should not exceed 5 seconds, and after starting, idle for 2 minutes to allow the battery to recover; 2. Keep the battery warm when starting in low temperatures to ensure sufficient starting capacity.
9
0
Share

What are the damages to a car if the engine oil is not changed?

Not changing the engine oil can cause the following damages to a car: increased engine wear, shortened engine lifespan, louder operating noise, and noticeable vibrations. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine components; 4. To buffer the pressure rise at the engine cylinder port; 5. To flush away dirt generated on the working surfaces of components. Signs that indicate the need for an oil change include: 1. Checking the oil viscosity—if there is no viscosity, the oil needs to be changed; 2. The oil color turns black; 3. Excessive black particles, metal shavings, or carbon deposits in the oil; 4. An abnormal smell from the oil.
11
4
Share

What type of oil should be used for the Changan CS75?

Changan CS75 should use 5W30 oil. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent contamination from external pollutants; 3. To protect components from contact with water, air, and harmful acidic gases; 4. To cushion the pressure rise in the engine cylinder ports; 5. To clean dirt generated on the working surfaces of components. The functions of transmission oil are: 1. To maintain the cleanliness of the gear system; 2. To lubricate the transmission components. Taking the 2021 Changan CS75 as an example, it is a compact SUV with the following dimensions: length 4650mm, width 1850mm, height 1715mm, wheelbase 2700mm, fuel tank capacity 58 liters, and trunk capacity 520 liters.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.