What is the reason why the Bluetooth is connected but there is no sound in Haval H6?

Can the particulate filter in the Tiguan L be removed?

The particulate filter in the Tiguan L is not recommended to be removed. The particulate filter is a ceramic filter installed in the exhaust system of diesel engines, which captures particulate emissions before they enter the atmosphere. Functions of the particulate filter: The particulate filter can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. To check whether the vehicle is equipped with a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, you can carefully check the fault codes in the manual to see if there is a "particulate filter" fault light indicator. Check the label on the oil cap. If the oil cap clearly indicates 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Check whether there is a cylindrical section behind the three-way catalytic converter on the exhaust pipe. If there is, that is the particulate filter.

18

2

Share

Has the 1500 km break-in period passed?

1500 km marks the completion of the first stage of the break-in period. This initial phase is crucial for ensuring proper friction, adaptation, and stabilization of the vehicle. During this time, the car's components adjust to their operating environment, and any surface irregularities on parts are smoothed out. The quality of the break-in process significantly impacts the vehicle's lifespan, safety, and fuel efficiency. Below are detailed guidelines for the break-in period: Regular inspections: Avoid overloading the engine. Do not change the original engine oil prematurely during the break-in period. Frequently check and replenish engine oil, coolant, battery, and electrolyte levels as needed. Keep RPM moderate: While normal vehicles may reach 6000+ RPM, maintain engine speed below 4000 RPM during the break-in period. Proper throttle control: Maintain smooth acceleration by avoiding sudden throttle inputs to reduce engine stress. Warm up before driving: Allow 1 minute for warm-up before departure, and avoid aggressive acceleration during the first few minutes of driving. This practice benefits the vehicle not just during break-in but throughout its service life.

15

1

Share

What Vehicles Are Suitable for 15W50 Engine Oil?

15W50 engine oil is suitable for vehicles with high mileage and significant wear, as the increased clearance between pistons and cylinders requires higher viscosity oil to maintain proper oil film thickness for lubrication. If the viscosity is too low, the oil may leak into the combustion chamber, leading to oil burning. Below are specific considerations for using engine oil: Selecting Based on Engine Requirements: Choose engine oil according to the engine's specifications. Using overly advanced oil in engines with lower requirements is unnecessary, and lower-grade oil should not be used in high-performance engines. Preference for Multi-Grade Oil: Multi-grade oil is recommended due to its cost-effectiveness, longevity, and efficiency in protecting the engine. Due to its properties, multi-grade oil may appear darker earlier or exhibit lower oil pressure compared to conventional oil, which is normal. Seasonal Considerations: For engines in good condition during colder seasons, lower viscosity oil is preferable for smoother oil flow. In high-temperature conditions or for severely worn engines, higher viscosity oil helps form a protective oil film and reduces engine wear.

2

3

Share

What Causes Jerking Sensation While Driving?

There are several reasons for a jerking sensation while driving, including a clogged air filter, damaged solenoid valve, and sludge buildup in the transmission fluid blocking the valve body's oil passages. Clogged Air Filter: If the air filter is not cleaned for a long time, it can allow a large amount of dust to enter the combustion chamber. The dust can then mix with atomized fuel and adhere to various components, such as the idle speed control valve's small holes and the throttle plate. The solution is to clean the air filter. Damaged Solenoid Valve: This is a major cause of jerking. Jerking can be either sporadic or occur at fixed intervals. Sporadic jerking happens unpredictably, while fixed jerking occurs at specific RPMs, during certain gear shifts (e.g., shifting from 2nd to 3rd gear), or at fixed speeds. The solution is to repair or replace the solenoid valve. Sludge Buildup in Transmission Fluid Blocking Oil Passages: Sludge in the transmission fluid blocking the valve body's oil passages can cause jerking. Over time, this can lead to a series of transmission issues, such as overheating, harsh shifting, and slipping. The solution is to clean the sludge from the transmission.

10

2

Share

What are the dimensions of the Explorer?

The length, width, and height of the Explorer are: 5075mm, 2004mm, and 1778mm respectively, with a wheelbase of 3025mm. Below is an introduction to the Explorer: 1. Vehicle Positioning: The Explorer is a mid-to-large-sized SUV. 2. Interior Features: The 12.8-inch vertical central control screen is equipped with the SYNC+2.0 intelligent infotainment system, which supports GPS navigation, voice recognition control, multimedia entertainment, and more. Additionally, the L2-level Ford Co-Pilot360 intelligent driving assistance system is standard across all models. 3. Powertrain: The entire lineup features a high-spec 2.3T+10AT powertrain combination, with the engine delivering a maximum power of 276 horsepower and a peak torque of 425 Nm. The rear-wheel-drive model can accelerate from 0 to 100 km/h in just 7.6 seconds. Except for the entry-level model, all other models come with a four-wheel-drive system, with an average fuel consumption of around 12L per 100 km.

10

2

Share

What does 'hold' mean on a car?

Hold on a car refers to the automatic parking function. After activating this function, for example, when stopping at a red light, there is no need to pull the handbrake. It simplifies the operation by avoiding the use of the handbrake or electronic parking brake, and automatic transmission models do not need to frequently switch between D to N or D to P. How automatic parking works: The automatic parking function provides accurate parking force through a slope sensor controlled by the controller. During startup, the parking control unit calculates information provided by sensors such as clutch distance, clutch engagement speed, and throttle pedal. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly. The role of automatic parking: Drivers do not need to brake for a long time. When the electronic parking brake is activated, it prevents unnecessary sliding of the vehicle; ensures the vehicle does not roll back when starting on a slope, eliminating the need to rely on the driver's experience with the handbrake. Precautions for using automatic parking: The automatic parking function operates normally only when the seatbelt is fastened and the door is closed; when parking, simply pull the handbrake, shift to P, and lock the car without worrying about whether automatic parking is enabled; automatic parking on an uphill slope has a limited time, usually two seconds, and the driver must promptly apply throttle after releasing the brake pedal to avoid the risk of rolling back.

8

2

Share

What is the reason why the Bluetooth is connected but there is no sound in Haval H6?

Can the particulate filter in the Tiguan L be removed?

Has the 1500 km break-in period passed?

What Vehicles Are Suitable for 15W50 Engine Oil?

What Causes Jerking Sensation While Driving?

What are the dimensions of the Explorer?

What does 'hold' mean on a car?

What is the actual fuel consumption of the Toyota Camry 2.4?

How to Remove the Roof Lining of a Magotan?

What is the Function of a Manual Transmission?

Why was the Haval H8 discontinued?