What is the reason why the balance car cannot be charged and the light is always green?

2 Answers
Briella
09/09/25 3:10am
This indicates that the internal lithium battery of the balance car is damaged, either due to excessive internal resistance or a short circuit in the lithium battery. In this state, the battery cannot be charged when connected to the charger, but the balance car can still operate using the power provided by the charger. At this point, the lithium battery board needs to be replaced. Below is the relevant explanation: Reasons for the light always showing green: Generally, a green light indicates sufficient battery charge, while a yellow light indicates the need for charging. It could also be due to a disconnected charging cable or a damaged charger. Another possibility is damage to the balance car's battery protection board. Important notes: The battery is the lifeblood of an electric balance car. If the battery performance is substandard, any impact or collision that causes a short circuit can lead to safety hazards such as explosions, fires, or combustion, turning the balance car under your feet into a real "wheel of fire."
Was this review help?
19
3
Share
LeJohnny
09/20/25 8:01am
My balance scooter has recently encountered the same issue—it shows a green light while charging, but the battery level doesn't increase at all. This problem is mostly related to the charging circuit or the battery itself. First, check if the charger has output voltage by using a multimeter to measure whether the plug's voltage is around the normal 42V. If the voltage is normal, the issue might be due to oxidation or poor contact at the charging port—try cleaning the metal contacts with an alcohol swab. If that doesn’t work, it’s likely that the battery protection board is locked, especially after long periods of inactivity or over-discharge. Last week, I opened mine up and found that some battery cells become unbalanced over time, triggering the protection. Another easily overlooked possibility is a faulty charger indicator—it might actually be charging, but the green light won’t change. In this case, try testing with a replacement charger. If all else fails, it’s safer to take it to a professional repair shop for inspection, as disassembling the battery yourself carries risks.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

How to Unlock an Audi Car's Deadlock?

First, do not attempt to start the car. If the vehicle is started, turn it off immediately to ensure your safety. Turn the steering wheel slightly to release the deadlock and enhance safety. However, remember to turn the steering wheel left and right to lock it again the next time you turn off the engine and exit the vehicle.
12
5
Share

How to Set Up BMW Welcome Lights?

You can set the home lighting duration in iDrive (Settings - Lights), for example, to 30 seconds. The lights will automatically turn off 30 seconds after locking the doors. For models with a diamond-shaped button on the car key, after setting the duration, press the diamond-shaped button to automatically activate the welcome lights function.
9
4
Share

What is the Principle of Car Seat Heating?

The principle of car seat heating involves the use of electric heating wires inside the seat to generate heat. The basic structure of a seat heater consists of: a lower layer of non-woven fabric, heating wires arranged on the non-woven fabric, fixed in place with adhesive tape, and covered with knitted fabric. The knitted fabric is stitched into a shape similar to the heated area of the seat and sewn into the seat cover. Precautions for using car seat heating: 1. The seat heating function only works when the ignition switch is turned on; 2. Turn off the seat heating or ventilation promptly after parking; 3. Avoid placing overly thick cushions on heated seats; 4. Turn on the seat heating switch only after starting the engine.
4
4
Share

What engine is in the Baojun RM-5?

The Baojun RM-5 is equipped with a model LJO 1.5-liter turbocharged engine. This engine delivers a maximum power of 108 kW, a maximum horsepower of 147 hp, and a maximum torque of 250 Nm. The engine serves as the power-providing device for the vehicle, acting as the heart of the car, determining its power performance, fuel economy, stability, and environmental friendliness. The vehicle's dimensions are 4705mm in length, 1806mm in width, and 1625mm in height, with a wheelbase of 2750mm. The car features front-wheel drive, with a front suspension system using MacPherson strut independent suspension and a rear suspension system employing a torsion beam semi-independent suspension.
8
3
Share

How to Reset the Maintenance Light on a Buick?

Steps to reset the maintenance light on a Buick: 1. Turn on the ignition; 2. Press the menu button on the control stalk; 3. Use the adjustment wheel to switch and select the vehicle information menu; 4. Rotate the adjustment wheel to select oil life; 5. Press and hold the confirmation button for several seconds; 6. The dashboard display will show 100% oil life, indicating a successful reset. The purpose of the maintenance light is to record the mileage of some important components, serving as a reminder for the car owner and maintenance personnel. Although the maintenance light does not affect the car's performance, it must be reset after maintenance; otherwise, the owner cannot accurately know the usage time of new components when replacing them next time.
12
3
Share

What is the Difference Between Registering a Car Locally and Out-of-Town?

Differences between registering a car locally and out-of-town: 1. Different reissuance locations: If the vehicle license or license plate is lost, out-of-town registration requires reissuance at the vehicle's original registration location; local registration can be reissued at the local vehicle management office within the jurisdiction. 2. Different annual inspection procedures: For out-of-town registration, local inspection requires first obtaining a letter of authorization and other relevant procedures from the vehicle's original registration location before conducting the inspection locally; for local registration, simply bring the relevant documents to the local vehicle management office for inspection. License plates serve as identification and information registration for vehicles, primarily allowing identification of the vehicle's registered region and enabling tracing of the vehicle's owner and registration details.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.