What is the reason why the Audi Bluetooth function suddenly cannot be used?

1 Answers
LaKate
07/29/25 8:38pm
Audi Bluetooth function suddenly cannot be used because the audio source of the car system is not selected to Bluetooth. Selecting the Bluetooth player can solve the issue. Volume: The volume on the car navigation system or mobile phone is not turned on; go to the phone "Settings", "Sound", find the "Media" option, and turn up the "Media" volume. The same applies to the car navigation system. Incorrect pairing code: The music playback programming of some mobile phones (such as iPhone) does not match the pairing code of certain car models, so you can only answer calls but not listen to music. It is recommended to change the Bluetooth playback frequency band to use it normally. If the multimedia music of the car Bluetooth is not turned on, find the multimedia option on the screen, enter it, and select Bluetooth to play music.
Was this review help?
19
0
Share
More Forum Discussions

Is There No Environmental Protection Label This Year?

There is an environmental protection label this year, but it does not need to be affixed to the vehicle. Below is an introduction to the relevant knowledge about the automotive environmental protection label: 1. Classification: The automotive environmental protection label is a grading label for vehicle emission standards issued by the state, divided into two main categories: yellow and green. It is issued after reviewing the vehicle type and emission standards. 2. Purpose: The aim is to facilitate energy-saving and emission-reduction inspections and regular environmental checks for vehicles. 3. Issuance Principle: The principle for issuing the environmental protection label is as follows: for gasoline vehicles, those that meet or exceed the National Phase I Emission Standard ("National I") or higher emission standards are issued a green environmental protection label; those that do not meet the National Phase I Emission Standard ("National I") or higher emission standards are issued a yellow environmental protection label.
15
3
Share

Which gear should the car be in when waiting at a traffic light?

Detailed introduction on which gear an automatic transmission car should be in when waiting at a traffic light is as follows: 1. Waiting for less than 30 seconds: If the automatic transmission vehicle is expected to stop and wait for less than 30 seconds, keep it in D gear with foot brake applied. 2. Waiting for more than 30 seconds: If the expected stop and wait time is more than 30 seconds, shift to N gear with handbrake applied; 3. Waiting for more than 2 minutes: If the expected stop and wait time is more than 2 minutes, shift to N gear with handbrake applied and turn off the engine. For manual transmission cars when waiting at a traffic light: For manual transmission vehicles during waiting periods, directly press the clutch and brake in first gear. For longer waits, shift to neutral and apply the handbrake. If the stop time is short, the gear lever can remain in D position.
2
0
Share

Why Does the Car Shake Violently After Starting?

Severe shaking after starting the car may be caused by excessive carbon deposits, insufficient cylinder pressure, and other reasons. Here is an analysis of the possible causes related to car shaking: 1. Excessive Carbon Deposits: Excessive carbon deposits can lead to low fuel pressure, resulting in insufficient fuel supply and lack of power. It is recommended to clean the fuel injectors and check the fuel pressure. Additionally, poor ignition may cause incomplete combustion and noticeably higher fuel consumption, which can be resolved by replacing the spark plugs. 2. Insufficient Cylinder Pressure: This commonly manifests as misfiring and shaking, along with a lack of power. It is necessary to test the cylinder pressure. Finally, visually inspect whether the balancing weights on the rims are missing or if the wheel hubs are noticeably deformed.
20
3
Share

Are Driving Licenses Universally Valid?

Driving licenses are valid nationwide, but the license review must be conducted at the place where the license was originally issued. For convenience, vehicle owners may also choose to replace their license. According to national regulations, if the household registration of a motor vehicle driver is relocated outside the jurisdiction of the original vehicle management office, the driver should apply for a license replacement at the vehicle management office of the new location. If a motor vehicle driver resides outside the jurisdiction of the vehicle management office where the license was issued, they may also apply for a license replacement at the vehicle management office of their current residence. License transfer can be categorized into two types: license transfer-out and transfer-in. This refers to the procedure where vehicle owners, due to reasons such as job transfers or moving, relocate from their original place and transfer their driving license to their new residence to avoid the hassle of annual license reviews. Whether transferring out or in, the vehicle management office of the final residence jurisdiction serves as the licensing authority. License transfers can be summarized as local residents transferring in with an out-of-town license and non-local residents transferring in with an out-of-town license.
19
0
Share

Which Light to Observe When Making a Right Turn?

When facing a circular red traffic light, you can generally make a right turn even if the intersection displays a red light, unless there are specific traffic instructions prohibiting it. However, with arrow signal lights, you may only turn right when the right-turn arrow turns green; otherwise, it constitutes running a red light violation. Below are relevant details: When there is a dedicated right-turn signal light or right-turn sign, you must follow the signal's instruction. In the absence of a right-turn signal or sign, you can turn right when the straight-through light is red. At intersections without dedicated bicycle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle traffic signals. When the light is red, right-turning vehicles may proceed provided they do not obstruct the passage of other vehicles or pedestrians. Another often overlooked violation when making a right turn is failing to yield to pedestrians. If pedestrians are crossing the road during your right turn, you must stop and wait; otherwise, you may face a fine. Similarly, if left-turning vehicles are approaching during your right turn, you must yield to them. In case of a collision, the right-turning vehicle typically bears greater responsibility.
2
1
Share

What to Do If You Fail the Subject 2 Driving Test for the First Time?

If you fail the Subject 2 driving test on your first attempt, you are allowed one retake. If you do not take the retake or fail it again, the current test session ends, and you must reschedule the test after ten days. Within the validity period of your driving skill test permit, you can schedule the Subject 2 and Subject 3 road driving skill tests up to five times. If you fail the fifth attempt, any previously passed subjects will be invalidated. Additional Information: Passing Criteria: The test is scored out of 100, with deductions of 20, 10, or 5 points for various mistakes. To pass: (1) For large buses, tractors, city buses, medium buses, or large trucks, a score of 90 or above is required; (2) For other vehicle types, a score of 80 or above is needed.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.