What is the reason the headlight adjustment screw doesn't work?

2 Answers
RoseFitz
07/25/25 4:13pm
If the misalignment is caused by an accident, the positioning needs to be readjusted. However, in many cases, it's due to improper adjustment where turning the screw to the limit has no effect - this isn't caused by accidents or damage. In such situations, an experienced technician should perform the adjustment. Another possibility is that the bulb's original angle is incorrect, making adjustment impossible; in this case, simply replacing the bulb will suffice. Detailed information about headlight adjustment is as follows: 1. Standard for car headlight adjustment: Park the car 7.6 meters away from a wall, turn on the headlights, and adjust the beam position according to the light pattern on the wall, adjusting both high and low beams sequentially. Alternatively, you can drive the car onto a level road, align the low beam's focal point at 30 meters with two points overlapping, and adjust the high beam to be parallel with the ground. 2. Headlight height adjustment: The headlight height adjustment switch uses a rotary wheel marked with numerical gears. The numbers indicate the headlight height level - the higher the number, the higher the headlight beam points. Correct adjustment of headlight beam height is crucial, as the directional height of the beam not only affects actual illumination effectiveness but also significantly impacts driving safety for both your vehicle and others.
Was this review help?
16
4
Share
McCourtney
08/11/25 9:44pm
Last time I drove long-distance, I found the headlight adjustment screw was stuck and the beam remained misaligned. Driving at night was truly unbearable. I suspect the main causes are rusted screw threads seizing up, dirt or mud clogging the rotating parts, or internal gear wear causing looseness. It's also possible the car was bumped, shifting the position and deforming the entire mechanism. I recommend first trying some rust remover spray. If that doesn't work, avoid forcing it to prevent cracking the lamp housing. If the issue persists, promptly visit a professional auto repair shop for inspection. Proper headlight alignment isn't just about illumination - misaligned beams during turns can obscure roadside visibility and lead to accidents. This is a critical safety issue that requires immediate attention as it directly impacts driving safety.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What is the A1 car?

A1 is a compact car under the Audi brand, and the Audi A1 is an imported vehicle. In terms of body dimensions, the Audi A1 measures 4029mm in length, 1740mm in width, and 1409mm in height, with a wheelbase of 2563mm. The powertrain of the A1 features Audi's star combination: the TFSI fuel direct injection turbocharged engine paired with the Stronic dual-clutch transmission. Exterior-wise, the front fascia of the Audi A1 carries distinct Audi family traits while showcasing its own unique and innovative details. The hexagonal single-frame grille gives Audi models a more sporty and dynamic appearance.
19
4
Share

What is the purpose of an eccentric shaft sensor?

Engine eccentric shaft sensor detects the position of the eccentric shaft when equipped with an electronic valve control system. The eccentric shaft adjusts the camshaft to achieve optimal intake valve lift (infinitely variable adjustment) under all operating conditions. The eccentric shaft is adjusted by an electronic valve control servo motor. Below is an introduction to the eccentric shaft sensor: Eccentric shaft sensor: The eccentric shaft sensor is equipped with two independent angle sensors with opposite characteristics. It operates based on the magnetoresistive effect principle, where a ferromagnetic conductor changes its resistance under the influence of a magnetic field. Design structure: The sensor adopts a redundant design structure, with two sensor elements installed in one housing. One sensor performs the guiding task, which is monitored by the reference sensor.
14
5
Share

Where is the radiator of the Nissan Sylphy Classic located?

The radiator of the Nissan Sylphy Classic is located at the front end of the car near the fan. Below is relevant information about coolant: 1. When filling coolant, please note that coolant is generally a 50%:50% mixture of pure water and coolant concentrate. The specific ratio is indicated on the purchased coolant container. Coolant protects all light alloy components in the cooling system from corrosion. In addition, it prevents deposits and significantly increases the boiling point of the coolant. 2. Coolant is prepared by mixing antifreeze and water in a certain proportion. Automobile manufacturers usually specify the antifreeze mixing ratio for different low-temperature antifreeze grades in the user manual, and also specify the type of antifreeze, which cannot be mixed.
3
0
Share

Will the car get flooded in heavy rain?

Heavy rain will not flood the car. Here is relevant information: When driving through water: If the engine stalls during vehicle wading, immediately turn on the hazard lights, shut off the engine, and turn off the ignition. Do not attempt to restart the engine, as doing so can easily cause fatal damage to the engine and will not be covered by insurance. When stationary: If the vehicle is submerged in water while parked in a basement or parking lot, lock the vehicle and do not attempt to start the engine. Try to seal the vehicle as much as possible and do not remain inside a flooded car. After a vehicle is submerged and the engine stalls, the interior becomes the most unsafe place. If the water level rises rapidly and the doors cannot be opened, passengers may become trapped inside and suffocate after the vehicle loses power.
17
5
Share

How to Turn Off the Radio in the Mazda3 Axela?

The method to turn off the radio in the Mazda3 Axela is to press and hold the volume button to completely shut down the infotainment system. If you only need to mute the audio, you can switch to USB input and then pause the music playback. Below is some related information about the Mazda3 Axela radio: 1. To use the Mazda3 Axela radio, the large knob on the left is the tone control knob. The small knob is the volume control knob and power switch. Some models may have a push-pull type power switch. The large knob on the right is the sensitivity switch, and the small knob is the manual tuning knob. 2. The two knobs in the middle are the automatic tuning buttons for left or right. Press the right button to move the pointer left, and press the left button to move the pointer right.
12
0
Share

Should the air conditioning be turned off before shutting down the engine?

Turn off the air conditioning before shutting down the engine. If you turn off the engine first and then turn on the air conditioning, the next time the vehicle starts, the engine will start with the load of the air conditioning, and such a high load will damage the engine. Additional information: The principle of car air conditioning: The working principle of car air conditioning The car air conditioning refrigeration system consists of a compressor, condenser, liquid storage dryer, expansion valve, evaporator, and blower, among others. The components are connected into a closed system using copper pipes (or aluminum pipes) and high-pressure rubber hoses. The compression process of car air conditioning: Compression process The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compresses it into high-temperature and high-pressure gas, which is then discharged from the compressor.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.