What is the reason for uneven cooling in the Nissan Sylphy's air conditioning system?

1 Answers
DeChristopher
07/29/25 8:29pm
Nissan Sylphy car air conditioning system experiencing uneven cooling (one side cold while the other not) generally has the following causes: Air vent issues: Damage to one of the air vent servo motors, resulting in one side of the air conditioning not cooling; check the direction of the left and right air vents, observe the servo motor controlling the airflow direction on the right side, and see if the motor rotates accordingly. Air valve plate issues: Inspect whether the air door has malfunctioned. If the air valve plate is stuck, it will hinder the rotation of the valve plate, directly affecting the airflow output. Air duct blockage: Blockage in one side of the air duct, causing uneven cooling in the air conditioning system. Dual-zone control function activated: If it is an automatic air conditioning system, the dual-zone control function might be activated; simply deactivate the dual-zone air conditioning function.
Was this review help?
15
0
Share
More Forum Discussions

How Long Does It Usually Take to Repair a Car Tire?

There are generally two methods for tire repair: hot patching and cold patching. Hot patching typically takes about half an hour, while cold patching takes around ten minutes. Additionally, the time required for tire repair also depends on the extent of tire damage. Below is some relevant information about tires: 1. Generally, the condition of the tires determines the performance of the car. Tires are the only part of the car that comes into contact with the ground, and the degree of tire wear is crucial, especially concerning braking distance. Over time, the elasticity of the rubber weakens. A normal tire has a lifespan of about 4 years, and tires that have been in use for more than 4 years should be replaced immediately. 2. If the car is often parked outdoors, it is advisable to regularly check the condition of the tires. If small cracks are found on the sidewalls of the tires, they should be replaced immediately to avoid affecting the normal performance of the car.
1
0
Share

Can Gasoline Be Stored in Plastic Barrels?

Gasoline should not be stored in plastic barrels. Here are specific details about gasoline containers: 1. Plastic Barrels: Plastic containers have high resistivity and are insulators. If static charge is generated, it cannot be quickly released, leading to electrostatic accumulation. Petroleum products also have high resistivity, especially gasoline. When gasoline sloshes and rubs inside a plastic container, it can randomly generate high voltage. Both plastic containers and gasoline are insulators; when static voltage reaches 300 volts, discharge occurs, producing sparks that can ignite gasoline vapors around the container, potentially causing an explosion. 2. Anti-Static Plastic Barrels: Plastic barrels have their advantages, particularly plastic IBC (Intermediate Bulk Container) barrels, which are convenient for transportation and stacking and are increasingly widely used. To address the static issue, anti-static barrels are now available. These barrels are coated with an anti-static layer on the outer surface. Plastic barrels with anti-static coatings can be used to store flammable materials.
1
2
Share

How to Adjust Rearview Mirrors for Beginner Drivers?

Method for beginner drivers to adjust rearview mirrors: Move the left mirror horizontally until the car body occupies one-quarter of the mirror's area, allowing visibility of the rear door handle. Adjust the right mirror horizontally so that the car body takes up about one-quarter of the mirror's area, with the rear door handle visible in the mirror. Adjust the interior mirror horizontally so that it aligns with your right ear, making the right ear just out of view. The best practice is to position the interior mirror at the horizontal center of the mirror. Additional Information: 1. After adjusting the mirrors, proceed to adjust the seat and steering wheel. The basic principle for seat adjustment is: sit comfortably with clear visibility for easy driving. Maintaining the correct sitting posture is a prerequisite for adjusting the rearview mirrors; an improperly adjusted posture will render the mirror adjustments ineffective. 2. For adjusting the seat's forward and backward position, when you stretch your arms forward with fists clenched and your wrists align with the top of the steering wheel, the seat position is optimal.
8
4
Share

What Causes the Handbrake Light to Stay On?

The reasons why the handbrake light stays on are: 1. The handbrake is not fully released, causing the handbrake light to illuminate. You should promptly check and fully release the handbrake. 2. Insufficient brake fluid, where the brake fluid level is below the safety line, causing the handbrake light to illuminate. You should promptly check and refill the brake fluid. 3. Worn brake pads or foreign objects lodged in the brake pads causing the handbrake light to illuminate. You should promptly check and replace the brake pads or remove any foreign objects. Additional Information: Handbrake Principle: The handbrake uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce effectiveness and increase the handbrake travel distance.
15
4
Share

What is the working process of an automotive air conditioning system?

Automotive air conditioning system working process is: 1. Compression process: The compressor sucks in low-temperature and low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature and high-pressure gas, which is then discharged from the compressor. 2. Heat dissipation process: The high-temperature and high-pressure superheated refrigerant gas enters the condenser. Due to the decrease in pressure and temperature, the refrigerant gas condenses into a liquid and releases a large amount of heat. 3. Throttling process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, where its volume increases, and its pressure and temperature drop sharply, exiting the expansion device in a mist form. 4. Heat absorption process: The mist-like refrigerant liquid enters the evaporator. Since the boiling point of the refrigerant is much lower than the temperature inside the evaporator, the refrigerant liquid evaporates into a gas. During the evaporation process, it absorbs a significant amount of surrounding heat, and then the low-temperature and low-pressure refrigerant vapor re-enters the compressor. This working principle cycle repeats continuously, thereby reducing the temperature of the air around the evaporator.
12
2
Share

How to Determine Which Gasoline Grade to Use for a Car?

Methods to check the gasoline grade for a car: 1. Refer to the car's user manual, which records the recommended gasoline grade for the car. 2. The fuel cap usually indicates the fuel grade, recommending which gasoline grade to use and which is optimal. Below is relevant information about gasoline: 1. Currently, in China, the national (IV) gasoline grades include three types: 90, 93, and 97. The national (V) grades are 89, 92, and 95 (with 98 available in the appendix). Gasoline grades are classified by octane rating. 2. If a high-compression engine uses a low-grade gasoline, it can cause a sharp rise in cylinder temperature, incomplete combustion of gasoline, severe engine vibration, resulting in reduced power output, damaged components, increased fuel consumption, and poor driving performance. 3. If a low-compression engine uses a high-grade gasoline, it may lead to "delayed ignition," meaning the auto-ignition point is not reached even at maximum compression, resulting in incomplete combustion, which is also not beneficial for the engine.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.