What is the reason for the Volvo display screen not lighting up?

2 Answers
MorganDella
07/28/25 8:53pm
Volvo display screen not lighting up may be due to the following reasons: 1. Loose wiring: It is necessary to promptly check whether the wiring is loose, as this can naturally cause the central control screen to go black. 2. Aging signal cable: If the power signal cable is aging, you can try replacing it with a new one. 3. Damaged display screen: Check if the display screen is damaged. Replace the display screen for testing, and if it returns to normal, the display screen is damaged. Below is some relevant information about Volvo: 1. Dimensions: This is a mid-size SUV with a 5-door, 5-seat body structure. Its length, width, and height are 4688mm, 1902mm, and 1658mm respectively, with a wheelbase of 2865mm. 2. Chassis: The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link independent suspension.
Was this review help?
18
1
Share
LeNora
08/12/25 1:36am
Once my Volvo display went black, which was quite startling at first, but I later realized it could be due to multiple reasons. The most common issue is a blown fuse—check the corresponding number in the fuse box and replace it. Alternatively, loose wiring might be the culprit; gently wiggle the relevant plugs to see if the display lights up. Software problems are also frequent, especially system crashes, and I usually fix them by restarting the car. Never overlook unstable power sources, such as an aging battery or alternator failure, as they can indirectly affect the display. Environmental factors also play a role, like summer heat causing the screen to overheat or winter cold leading to delayed startup, etc. In short, DIY checks can save some money, but for complex issues, it’s safest to visit a professional repair shop to avoid unnecessary delays.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Which engine is used in the Volkswagen T-Roc?

The engine model of the Volkswagen T-Roc is EA211. Currently, the T-Roc offers two different powertrain combinations: a 1.2T engine paired with a 5-speed manual transmission and a 1.4T engine paired with a 7-speed dual-clutch transmission. Below are the relevant details: 1. The 1.2T engine delivers a maximum horsepower of 116 HP and a peak torque of 175 N·m. The 1.4T engine comes in two versions with different power outputs: the low-power version produces a maximum horsepower of 131 HP and a peak torque of 225 N·m, while the high-power version delivers a maximum horsepower of 150 HP and a peak torque of 250 N·m. 2. The dimensions of the Volkswagen T-Roc are 4318 mm in length, 1819 mm in width, and 1582 mm in height, with a wheelbase of 2680 mm. It is equipped with the 4MOTION intelligent all-wheel-drive system, which intelligently distributes torque based on road conditions to save energy. 3. The Volkswagen T-Roc also features a driving mode selection system, offering four modes to choose from: Snow Mode, Road Mode, Off-Road Mode, and Off-Road Customization, allowing for flexible switching according to driving needs.
7
5
Share

How to Quickly Remove Odors from a Car?

Methods to quickly remove odors from a car are as follows: 1. Ventilation Method: On sunny days, park the car in a dry and well-ventilated area to air it out and eliminate odors. Avoid parking in damp places for extended periods, as this can lead to musty smells and negatively impact the car's lifespan. 2. Activated Carbon Method: Activated carbon has a strong ability to absorb odors, effectively removing formaldehyde and other unpleasant smells. 3. Fruit Method: Place lemons or pineapples in the car to counteract odors. 4. Vinegar Method: Vinegar can help stabilize formaldehyde. Its acetic acid can neutralize formaldehyde and other odors in the car, thereby eliminating harmful substances and improving air quality.
3
0
Share

How to Replace the Wiper Blades on a Mazda Vehicle?

The method for replacing wiper blades on a Mazda vehicle is as follows: 1. Lift the wiper blade upright and turn it upside down, keeping it parallel to the ground with the rubber blade facing upward. 2. Press the clips on both sides of the wiper blade to open the cover. 3. Thread the U-shaped hook on the wiper arm through the back of the cover. 4. Hook the wiper blade onto the arm and pull it firmly back until it locks into place. 5. Check that it is securely fastened, then gently lower the wiper blade back onto the windshield.
15
4
Share

What do Class B and Class C recreational vehicles mean?

Class B vehicles, also known as mid-size cars, typically have a wheelbase ranging from 2.7 to 3.0 meters and an engine displacement between 1.5 to 2.5 liters. Class C vehicles, referred to as executive cars or large mid-size cars, generally feature a wheelbase of 2.7 to 2.8 meters and an engine displacement from 2.5 to 3.2 liters. Below is a detailed introduction to the four classes of vehicles: 1. Class A vehicles, including A0 and A00 classes, generally refer to small cars, with typical compact models being the Golf, Cruze, and Focus; 2. Class B vehicles are mid-size cars, represented by models such as the Honda Accord, BMW 3 Series, Volkswagen Magotan, and Buick Regal; 3. Class C vehicles are premium cars, with representative models including the Audi A6L, BMW 5 Series, Mercedes-Benz E-Class, and Toyota Crown; 4. Class D vehicles denote luxury cars, exemplified by the Mercedes-Benz S-Class, Maybach, and Rolls-Royce Phantom.
5
2
Share

How to Start an Automatic Transmission Car?

Correct method to start an automatic transmission car: 1. After sitting in the driver's seat, directly press the start button. 2. Depress the brake pedal and press the start button to ignite and start the engine. 3. Release the foot brake; you may choose to warm up the car in place. 4. Depress the brake pedal again and shift to D (Drive) gear. 5. Release the handbrake and slowly lift the foot brake to start moving. 6. According to road conditions, smoothly press the accelerator to increase speed and drive safely. The following is an introduction to the gears of an automatic transmission car: 1. P (Park) gear is for parking and starting. 2. R (Reverse) gear is for reversing. 3. N (Neutral) gear is the neutral position. 4. D (Drive) gear is for forward movement, also known as the driving gear. 5. S (Sport) gear is for sport mode. 6. L (Low) gear is for low-speed driving.
12
2
Share

What is the correct method for automatic parking?

The correct method for using automatic parking is as follows: 1. Apply the brakes. 2. Shift the car's gear to N (Neutral). 3. Engage the electronic parking brake. 4. Release the brakes. 5. Shift the car's gear to P (Park). 6. Turn off the vehicle. Below are the features of automatic parking: 1. When encountering situations like traffic lights that require a short stop, the system will automatically apply the brakes to prevent the vehicle from rolling after coming to a complete stop. 2. During uphill starts, the system will automatically apply the brakes to prevent rolling backward. Once you start moving, the system will release the brakes, allowing the vehicle to move forward. 3. When parking and locking the car, there's no need to engage the parking brake manually. The system will automatically apply the brakes to the wheels, but this feature is only available on certain models.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.