···
Log in / Register

What is the reason for the Volkswagen rearview mirror heating not working?

4 Answers
VonJanelle
09/05/25 5:05am

Volkswagen rearview mirror heating not working is mostly a symptom of the car's electric heating function. Below are the detailed reasons and solutions for Volkswagen rearview mirror heating not working: The electric heating function of the car's rearview mirror is not activated. Solution: Press the heating button and wait for a while, then touch the rearview mirror with your hand to see if it feels warm. If it does, it means the circuit is fine. Insufficient car battery power. Solution: Replace the battery or charge the battery. The rearview mirror heating switch is damaged. Solution: Go to a 4S shop for replacement.

Was this review help?
10
2
Share
LaEllie
09/17/25 5:33am

I used to be a car enthusiast who loved tinkering with technology, and I've encountered the issue of non-responsive rearview mirror heating in Volkswagen cars several times. The causes seem to be varied. A blown fuse is the most common culprit—those thin strips in the fuse box that burn out to protect the system when the current is too high. The switch button is also prone to failure; internal contact wear can lead to poor connectivity, preventing signals from being sent. Wiring issues shouldn’t be overlooked either, such as loose or short-circuited connectors, especially after rain when rust can set in. If the heating element itself has aged, prolonged high temperatures can cause it to fail—check continuity with a multimeter during inspection. I recommend starting with the fuse: consult the manual to locate it, replace it easily, and test. If that doesn’t work, take the car to a shop promptly to diagnose the entire control module, avoiding blurred vision while driving in the rain, which could compromise safety. Remember not to modify wiring yourself to prevent accidents.

Was this review help?
17
1
Share
Expand All
Leonard
10/31/25 6:02am

As a long-time Volkswagen owner who drives daily, a malfunctioning rearview mirror heater can be quite annoying. I suspect it's mostly due to a blown fuse, which is super simple to fix—just open the engine compartment or the fuse box on the driver’s side, find a matching new fuse, and replace it. The switch button might also be stuck or faulty, so check if the indicator light is on. Another possibility is a wiring contact issue, such as a loose or corroded plug; try cleaning the connector. Safety first—if you're not familiar with electrical circuits, it's best to leave it to a professional mechanic. Spending some money can save you a lot of hassle. These kinds of issues are common during the rainy season, so a quick check during regular maintenance can prevent bigger problems. From personal experience, don’t wait until it rains to fix it.

Was this review help?
1
2
Share
Expand All
PiperMarie
12/14/25 6:10am

The biggest fear while driving is safety risks. A malfunctioning rearview mirror heater is very dangerous. Once, I almost rear-ended another car in the rain due to poor visibility. Common causes include a blown fuse or a faulty switch. First, check the fuse location as indicated in the manual. If there's a short circuit or the heating element is damaged, the current won't flow, causing it to fail. Immediate action is recommended: turn on hazard lights and pull over safely—don't risk driving further. If under warranty, visit a 4S shop for free repairs; otherwise, call a tow truck to a reliable repair shop for inspection. Regularly clean and maintain the rearview mirror to minimize malfunctions.

Was this review help?
1
0
Share
Expand All
More Forum Discussions

What suspension does the Hafei Saibao use?

Hafei Saibao uses MacPherson independent suspension for the front suspension and multi-link independent suspension for the rear suspension. The multi-link independent suspension is an improvement based on the double-wishbone independent suspension, replacing the two wishbones of the double-wishbone suspension with separate links. The multi-link independent suspension can enhance the wheel's ground contact and grip, which in turn improves the vehicle's handling performance. As a relatively simple form of independent suspension, the MacPherson suspension is commonly used in front suspensions. Compared to the double-wishbone suspension and multi-link independent suspension structures, it occupies less space, making it easier to arrange the engine, and features lower design and manufacturing costs. Therefore, it is more commonly found in small and compact cars. Automotive suspensions are divided into independent and non-independent suspensions. They are devices that connect the vehicle's body to the wheel hubs, serving to support the body while also enhancing the comfort of driving and riding.
12
3
Share

What is the Difference Between a Motorcycle and a Locomotive?

Here is an introduction to the differences between motorcycles and locomotives: 1. Name: The term "motorcycle" consists of three characters and sounds old-fashioned; "locomotive" has two characters and is more novel and interesting. 2. Displacement: Motorcycles generally have limited displacement, which is relatively lower compared to locomotives; locomotives have higher displacement and outperform motorcycles in terms of speed. 3. Different applicable road conditions: Locomotives are suitable for rural mountain roads; motorcycles are suitable for urban highways. 4. Different principles: Locomotives generate power using steam engines, diesel engines, or traction motors, and the power is transmitted through locomotive transmission devices to drive the wheels, producing propulsion; motorcycles use engines to generate power, which is transmitted to the gearbox through the clutch, and finally to the wheels, propelling the motorcycle forward.
5
3
Share

What is the difference between autonomous lane changing and lane changing?

Here is an introduction to the difference between autonomous lane changing and lane changing: 1. Purpose: Autonomous lane changing is mainly for overtaking. When passing a stopped vehicle, pay attention to observation, stay alert, and maintain a large lateral distance, always being prepared for emergency braking to prevent the vehicle from suddenly starting and entering the lane, causing a collision, or the driver suddenly opening the door and getting out; lane changing is not necessarily for overtaking. 2. Danger: Autonomous lane changing is a relatively dangerous behavior that is unavoidable while driving. If obstacles on the left side of the road or insufficient lateral spacing pose a risk of collision, avoid using emergency braking to prevent side-slip collisions due to road camber. Instead, stabilize the steering wheel without turning it left or right, create an appropriate distance in the shortest time, and then look for an opportunity to overtake. Never take the risk of forcing an overtake; lane changing is relatively less dangerous.
19
1
Share

What is the difference between Toyota Corolla Hybrid and Hybrid E+?

Corolla Hybrid E+ is just Toyota's naming convention. The Corolla Hybrid E+ is an upgrade based on the non-plug-in hybrid version of the Corolla Hybrid, with no other significant differences. The relevant details are as follows: 1. The Corolla Hybrid E+ belongs to the PHEV (Plug-in Hybrid Electric Vehicle) category. 2. In the PHEV category of new energy vehicles, mass-produced vehicles must have a certain pure electric range.
18
5
Share

What is the difference between 220v and 380v charging piles?

The differences between 220v and 380v charging piles are as follows: Different input and output voltages: AC (220v) charging piles have a single-phase 220V input voltage; the output power is single-phase 220V/5KW; DC (380v) charging piles have a three-phase four-wire 380VAC power input voltage, and the output is direct current, with the output voltage meeting the battery system requirements of the charging object. Different charging methods: AC (220v) charging piles generally have only one charging mode; while DC (380v) charging piles have two charging methods: regular and fast. The regular method is a 5-hour charging mode, and the fast method is a 1-hour charging mode (selected based on different battery types). Different protection levels: AC (220v) charging piles should meet the relevant regulations in the "Low Voltage Distribution Design Specification" (GB/50053); DC (380v) charging piles (plugs) have a protection level that complies with the IP54 requirements of "GB-4208-1993 Enclosure Protection Level (IP Code)".
6
0
Share

What is the difference between small blue license plates and large blue license plates?

Here is an introduction to the differences between small blue license plates and large blue license plates: 1. Different quality: Trucks with a total mass below 4500KG are issued small blue license plates; trucks with a total mass equal to or greater than 4500kg are issued large blue license plates. 2. Different length: Vehicles with small blue license plates have a body length of less than 6 meters; vehicles with large blue license plates have a body length equal to or greater than 6 meters. 3. Different driver's license requirements: To drive a small blue license plate truck, a C1 or higher driver's license is sufficient. (C1 driver's license allows driving small and micro passenger cars as well as light and micro trucks; light and micro special-purpose vehicles); To drive a large blue license plate truck, a B2 or higher driver's license is required. (B2 driver's license allows driving heavy and medium-duty trucks or large, heavy, and medium-duty special-purpose vehicles, with heavy and medium-duty trucks mainly being trucks.)
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.