What is the reason for the Volkswagen Polo fan having high speed but no low speed?
2 Answers
Volkswagen Polo fan has high speed but no low speed because the pressure of the air conditioning system is abnormal. Clean the condenser of the air conditioning system in time: Generally speaking, if the condenser is too dirty, the working state of the air conditioning system will be affected. When using the air conditioning system, if the low-speed wind is selected, there will be no wind coming out of the air outlet. The main purpose of the condenser is heat dissipation. If external substances such as poplar catkins and willow catkins accumulate on the condenser, it will cause the engine temperature to be too high or the air conditioning system to malfunction. Therefore, it is necessary to clean the condenser of the air conditioning system in time. Clean the filter screen of the air conditioning system: If the filter screen of the air conditioning system is blocked, there will be no wind coming out when using the low-speed gear. At this time, it is necessary to clean the filter screen of the air conditioning system. If the filter screen can no longer be used, it is recommended to replace the filter screen directly.
I've dealt with quite a few cases where the Volkswagen Polo's fan only operates at high speed without low speed, and the most common cause is a faulty fan resistor. This resistor controls the fan speed, and if it's damaged or has poor contact, the fan can only run at high speed. Check whether the fuse is blown, whether the relay is working properly, and whether the wiring connections are loose. Sometimes, dust accumulation can clog components and cause problems. I recommend not delaying repairs, as continuous high-speed fan operation may increase the risk of engine overheating, and uneven cooling during summer driving can be even more troublesome. Cleaning the resistor area during regular maintenance can extend its lifespan. If diagnosis is difficult, it's best to spend some money for a thorough check at a professional repair shop—safety first. Replacing a small component is usually not expensive, but ignoring it could lead to major failures.