What is the reason for the Venucia T70 recall?

2 Answers
MacBraxton
09/03/25 7:21am
The reason for the Venucia T70 recall is that some vehicles, due to supplier production issues, have mechanical key ignition switch spring materials with surface damage (indentations). After repeated stress and fatigue, the spring may break, leading to insufficient spring fixing force. During vehicle operation, when additional weight is hung on the mechanical key ring and the vehicle experiences bumps, the mechanical key may accidentally turn to the ACC position, causing the vehicle to stall, posing a safety hazard. Below is relevant information about the vehicle recall: 1. Vehicle product recall is a mature mechanism to address automotive product defects, aimed at eliminating defects, ensuring quality, and protecting consumer rights. Recalls after identifying issues often reflect a company's responsible attitude towards consumers. 2. In accordance with the "Regulations on the Recall of Defective Automotive Products" and the "Implementation Measures for the Regulations on the Recall of Defective Automotive Products," Dongfeng Motor Co., Ltd. has filed a recall plan with the State Administration for Market Regulation. Starting from October 12, 2018, a total of 72,561 affected vehicles were recalled. Solution: Dongfeng Motor Co., Ltd. will conduct free inspections for vehicles within the recall scope and replace ignition switches from defective batches with qualified ones to eliminate safety hazards.
Was this review help?
7
1
Share
HarmonyAnn
09/15/25 8:42am
I've been following car news recently, and the recall of the Venucia T70 is mainly due to a minor issue with the fuel pump controller, which might cause the engine to suddenly shut off while driving—pretty scary. This problem has occurred in quite a few vehicles, and the recall covers a wide range, specifically cars from around the 2020 batch. The manufacturer stated that the fuel pump control module could overheat and malfunction, posing a significant safety risk if the engine stalls on the highway. I've driven similar models before, and in such cases, it's crucial to address the issue promptly by directly contacting the 4S dealership for a free part replacement. It's also a good idea to regularly check the fuel pump system during maintenance to prevent major issues. This recall not only fixes the problem but also improves reliability, preventing potential accidents in the future—safety first, after all.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How long can a license plate be retained under one's name?

It can be retained for at least two years. The following are the conditions that must be met to retain it for at least two years: 1. The license plate must be under one's own name: License plates cannot be traded, so a personal license plate can only be retained under one's own name. Additionally, the plate must have been used for at least one year. In other words, if you buy a car and the license plate is only registered for a few months before selling the car, and the plate has not been registered under your name for a full year, the plate will not be retained. It must be registered for a full year before the license plate can be used again. 2. Strict time limits apply: Previously, the maximum retention period was one year. However, for plates registered after July 2019, if they have been registered for one year, they can be retained for two years. This means that if the car is sold or transferred, the license plate will be automatically retained under the owner's name for two years. During this period, if the owner purchases a new or used car, they can directly register the retained plate, as long as it is within the two-year timeframe, and the owner can choose to use the same plate number again.
13
2
Share

What are the differences between the 2017 Tesla Model S and the 2019 version?

The differences between the Tesla Model 3 and Model S mainly lie in body dimensions, motor types, and driving range. Here are the specific details: 1. Body Dimensions: The Tesla Model 3 measures 4694/1850/1443mm, with both front and rear track widths at 1580mm. The Model S measures 4979/1964/1445mm, with a front track width of 1662mm and a rear track width of 1700mm. 2. Motor Types and Driving Range: (1) The Model 3 Standard Range Rear-Wheel Drive Upgrade and Long Range Rear-Wheel Drive versions both feature a permanent magnet/synchronous rear-mounted single motor. The Standard Range version is equipped with an LFP (Lithium Iron Phosphate) battery pack from CATL, with an official range of 468km. The Long Range version uses a ternary lithium battery pack, offering an official range of up to 668km. Both versions have a maximum power output of 202 kW and a maximum torque of 404 Nm. (2) The two lower-end Model S versions feature dual motors—front permanent magnet/synchronous and rear AC/induction—also powered by ternary lithium battery packs. The Long Range Upgrade version delivers a maximum power of 487 kW and a maximum torque of 844 Nm, with an official range of up to 719km.
3
4
Share

What are the reasons for loud engine noise in the Octavia?

Here are the reasons for loud engine noise in the Octavia: 1. Incompatibility with the viscosity of new engine oil. After prolonged use, the engine oil becomes thinner, and carbon deposits accumulate. When new oil is replaced, the engine may not adapt to the oil's viscosity, potentially increasing the RPM and causing loud engine noise. High-quality engine oil should be used. 2. Poor sound insulation. If the sound insulation is ineffective, the car's sealing strips should be inspected. If the sealing strips are found to be aged, they need to be replaced. 3. Insufficient coolant. In low temperatures, insufficient coolant can lead to louder engine noise. The coolant level should be checked promptly and refilled if necessary. 4. Abnormal shock absorbers. Issues with the car's shock absorbers can easily cause louder engine noise. Drivers should regularly check the shock absorbers to avoid malfunctions. Professional maintenance at a repair shop is recommended.
4
5
Share

Why Does the Civic Experience Engine Oil Dilution?

The reasons for engine oil dilution in the Honda Civic are as follows: 1. During engine startup, excessive fuel is injected, which fails to combust completely due to over-injection. The high pressure on the cylinder walls forces fuel into the crankcase. 2. Normally, fuel would evaporate once the engine reaches operating temperature. However, frequent cold starts and cold weather conditions prevent the oil from warming up sufficiently, making it difficult for the fuel to evaporate. This leads to a continuous increase in engine oil volume. Below are the hazards associated with engine oil dilution in the Honda Civic: Standard engine oil uses viscous oil to maintain lubrication for the engine. However, when the oil becomes diluted by mixing with un-evaporated fuel, its lubricating properties deteriorate, and sealing effectiveness decreases. This allows contaminants to enter. Some emulsification phenomena occur due to diluted oil reducing sealing performance, permitting incompatible substances like water to enter, which can cause severe engine wear.
1
3
Share

How to Replace the Key Battery for an Audi Car?

Audi car key battery replacement steps are as follows: 1. Before replacing the key battery, it is necessary to first understand the battery model of the car key. Generally, you can check it in the vehicle user manual and select a new key battery according to the specified model. 2. Press the switch on the metal part of the key back. While pressing the switch, pull the metal part outward to remove the hidden mechanical key. 3. After removing the mechanical key, you can see the internal structure of the original metal part. There are two clips on both the front and back sides. Press them simultaneously and pull outward. 4. Once removed, you can replace the new battery. Be careful not to reverse the positive and negative poles. The installation steps are the reverse of the disassembly sequence.
13
1
Share

Does Low RPM Affect the Haval M6 Vehicle?

Low RPM does affect the Haval M6 vehicle. Insufficient RPM means inadequate power, leading to gear dragging and putting the entire transmission system in an abnormal state. The impacts of low RPM are as follows: 1. Due to weak low-end torque, the Haval M6 is prone to stalling during hill starts. To avoid stalling, drivers often start by spinning the tires, but this triggers the ESP system to intervene and cut fuel supply, causing the vehicle to stall directly and making hill starts difficult. 2. The Haval M6's turbo does not engage until 2200 RPM, resulting in very weak power output. Even after turbo engagement, the maximum RPM only reaches 4500. The combination of weak low-end and high-end torque inevitably leads to difficult starts and sluggish acceleration.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.