What is the reason for the USB port disconnection in BYD S6?

1 Answers
DelEsther
07/30/25 10:27am
The reasons for the USB port disconnection in BYD S6 are as follows: 1. Poor contact: The USB port is not firmly connected, and the vibration of the car body after the engine starts causes the USB drive to be unreadable. 2. System interference: After the engine starts, the ignition system or power generation system interferes with the audio system, resulting in poor USB port performance. Extended information: BYD S6 is BYD's first SUV, positioned as a mid-to-high-end independent SUV, which was launched in September 2010. Its dimensions are 4810/1855/1680mm in length, width, and height, respectively, with a wheelbase of 2720mm, making it outstanding among SUVs in the same class. The minimum ground clearance of 190mm gives the vehicle excellent passing performance.
Was this review help?
19
5
Share
More Forum Discussions

What does the approach angle of a car mean?

The approach angle of a car refers to the angle between the tangent line drawn from the frontmost protruding point of the car to the front wheels and the ground when the car is fully loaded and stationary. In other words, it is the maximum angle between the horizontal plane and the plane tangent to the outer edge of the front wheel tires (under static load). No rigid components fixed to the vehicle in front of the front axle should be below this plane. The larger the approach angle, the less likely the car is to experience a 'nose-dive' accident when going up or down slopes or during off-road driving, and the better the car's passing performance. The departure angle refers to the angle between the tangent line drawn from the rearmost protruding point of the car to the rear wheels and the ground when the car is fully loaded and stationary. The larger the departure angle, the less likely it is for the rear of the vehicle to touch the ground and prevent passage; the smaller the departure angle, the more likely it is for the rear of the vehicle to touch the ground and prevent passage.
19
2
Share

What Type of Fuel is Used in New Energy Gas Stations?

There are many types of new energy vehicles. Hydrogen-fueled vehicles should use hydrogen stations, fuel cell electric vehicles also use hydrogen stations, pure electric vehicles use charging stations, hybrid vehicles currently use ordinary gasoline stations, ether vehicles use ether stations, and ethanol vehicles use ethanol stations, etc. Different new energy vehicles require different types of fueling stations. Here is some relevant information: 1. The differences between new energy vehicles and conventional vehicles: Conventional fuel vehicles have relatively mature technology, and their range is not limited since gas stations are everywhere. However, their drawbacks include high maintenance costs and traffic restrictions. On the other hand, new energy vehicles have advantages such as no traffic restrictions, exemption from purchase tax, low electricity costs, and low maintenance costs. Their disadvantages include short range, scarcity of charging stations, slow charging speeds, and high battery replacement costs. 2. The future prospects of new energy vehicles: One major drawback of fuel vehicles is the issue of exhaust emissions, which cause environmental pollution. This is one of the reasons why the government strongly promotes new energy vehicles. Another reason for the rapid development of new energy vehicles is the continuous rise in oil prices, with both gasoline and diesel prices being very high, making fuel expenses a significant annual cost.
7
1
Share

Can You Release the Clutch After Pulling the Handbrake?

You can release the clutch after pulling the handbrake because the function of the handbrake is to park the car, which means it provides secondary braking to prevent the car from rolling when parked. Pulling the handbrake is the final step in parking, so there is no need to press the clutch afterward. The handbrake is a specialized auxiliary brake in a car. Unlike the main braking system, the handbrake uses a steel cable connected to the rear brake shoes to apply braking force. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible. When parking normally, if you forget to pull the handbrake and the car starts to roll, you should immediately step on the main brake to prevent accidents. Whether driving a manual or automatic transmission car, it is advisable to maintain a certain distance from the car in front during daily driving. If the car starts to roll, immediate action should be taken. Keeping enough distance allows the driver sufficient time to react. For long-term parking, always remain vigilant and remember to pull the handbrake. This not only gives your foot a rest but also prevents the car from rolling.
11
1
Share

What causes steering wheel vibration when the car reaches 100 km/h?

When a car reaches 100 km/h, the reasons for steering wheel vibration are detailed as follows: 1. Issues with car tires; uneven mass distribution across different parts of the tire can cause dynamic imbalance when the wheels rotate at high speeds, leading to severe steering wheel vibration during driving. 2. Excessive braking; if steering wheel vibration occurs during braking while driving, it is likely due to overly forceful or frequent braking, which can cause the brake discs and pads to overheat and deform upon cooling, resulting in steering wheel vibration.
1
0
Share

Will reversing at a highway toll station after taking the wrong exit result in penalty points?

Reversing at a highway toll station after taking the wrong exit is not considered a traffic violation and will not incur penalty points. Here are some details about reversing at highway toll station exits: 1. Conditions for reversing: When you need to reverse after entering the wrong lane at a toll station entrance, you must ensure the safety of vehicles behind you before proceeding. If necessary, you can request assistance from highway toll station traffic police or staff to avoid accidents caused by personal reversing. 2. Penalty points situation: According to the "People's Republic of China Highway Traffic Management Regulations," reversing or lane changing on the highway directly results in a 12-point penalty.
19
3
Share

How Long Does a Start-Stop Battery Typically Last?

Start-stop batteries generally have a lifespan of around 3-4 years. Detailed information is as follows: 1. Start-stop batteries are not ordinary lead-acid batteries. 2. Start-stop batteries are special batteries (AGM type) that use pure sulfuric acid aqueous solution as the electrolyte and are housed in glass fiber separators. These batteries have a cyclic charging capacity three times higher than regular batteries, offering a longer service life but requiring more frequent charging and discharging. 3. If a start-stop battery exceeds its service life, it is necessary to inspect the battery's working condition more frequently.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.