What is the reason for the truck bouncing while running?

1 Answers
LeOscar
07/29/25 9:24pm
It is probably because the tire pressure is too high. Here is an introduction to the relationship between car tire pressure and car performance: 1. Tire pressure and load capacity: Tire pressure is an indicator of a car's load capacity. The tire pressure of a car determines its load capacity. The higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity, provided that the tire pressure is within the standard range. 2. The relationship between tire pressure and car power: When the tire is running on a horizontal road, it needs to overcome the resistance of the ground and air. When the tire pressure decreases, the rolling resistance coefficient increases rapidly, the tire rolls and deforms, and fuel consumption rises. Appropriate tire pressure is a guarantee of good car power. 3. The relationship between tire pressure and car ride comfort: The ride comfort of a car is directly related to the comfort of passengers. Appropriate tire pressure can bring better comfort to passengers. When the tire pressure of a car is too high, the tire becomes hard, the vibration frequency of the vehicle increases, and the ride comfort deteriorates. Proper adjustment of tire pressure ensures the ride comfort of the tire.
Was this review help?
14
2
Share
More Forum Discussions

How often should engine oil be changed for cars that are rarely driven?

For cars that are rarely driven, the engine oil should be changed every six months. The oil change interval for each car owner depends on the limits of the oil and oil filter. Choosing an oil filter that matches the oil is an important factor in extending the oil change interval. It is normal for engine oil to turn black, as the oil itself has strong cleaning capabilities. Through circulation, the oil can wash away and dissolve contaminants such as carbon deposits, sludge, and metal particles from engine components. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide cushioning and shock absorption for the engine. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil, imparting certain new properties and making them an important part of lubricating oil.
14
3
Share

How to Reset the Transmission of the New Excelle?

Turn on the car's power, press the brake pedal all the way down for 5 seconds (make sure it's fully pressed), release it, wait for 10 seconds, then press the brake pedal all the way down again for 10 seconds (ensure it's fully pressed), release it, and directly start the ignition. This process only needs to be performed once. Common faults include: Delayed gear engagement, slow speed increase, lifting, blocking and jerking, impact, engine fault light turning on, inability to drive the vehicle, reverse gear not moving forward, weak acceleration, vehicle speed reaching about 100 mph but unable to shift to 6th gear. High engine RPM without corresponding fuel acceleration. Solutions: Visit a transmission specialist shop promptly for inspection and repair, check and add transmission fluid, replace the lock-up solenoid valve, lock-up control valve if stuck, or the input shaft speed sensor.
4
4
Share

What is the liquid used for film application?

The liquid used for film application is clean water. During car film application, spraying water serves to prevent bubbles and allows for minor adjustments in positioning. The water prevents immediate adhesion, enabling the use of a squeegee to remove bubbles and make slight adjustments if the positioning is slightly off. Dry application makes it impossible to adjust if bubbles form. Car films effectively block UV rays and provide heat insulation and sun protection. Precautions for film application: 1. The water used must be filtered or settled; 2. Film application generally requires a sealed, dust-free environment; 3. When squeegeeing and cleaning the glass, follow a fixed method, as random or intermittent squeegeeing can introduce sand particles; 4. Extra attention should be paid to rinsing for older cars or triangular windows, but avoid rinsing the top to prevent dirt from sliding down with the water.
19
1
Share

Where is the transmission oil filler port located on the Ford Focus?

The transmission oil filler port on the Ford Focus is located near the reverse gear switch, which can be accessed by removing the reverse gear switch. The primary function of transmission oil is to keep the gear shift system clean and to lubricate the transmission components, thereby extending their lifespan. Due to differences in transmission design, transmissions are categorized into manual and automatic, each with its own specific technical requirements. The Ford Focus has body dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. The Ford Focus features front-wheel drive, with a front suspension type of MacPherson strut independent suspension and a rear suspension type of torsion beam non-independent suspension, and the body structure is of a unibody design.
5
1
Share

What are the steps to slow down a car?

Steps to slow down a car: For automatic transmission models, simply release the accelerator and then press the brake pedal to decelerate. Manual transmission models are more complex, requiring coordination of the brake and clutch based on engine speed and vehicle speed to slow down. In emergency situations where the vehicle needs to be stopped within a short distance and quickly, do not consider engine braking; instead, press both the clutch and brake pedals fully at once. After decelerating and before accelerating again, follow the principle of quickly pressing and slowly releasing the clutch. Quickly pressing the clutch cuts off engine power promptly, allowing the vehicle to decelerate, while slowly releasing it ensures smoother engine power output, reducing jerks when the clutch engages.
8
0
Share

What kind of paint is the Han Yu White color on the Boyue Pro?

Boyue Pro Han Yu White is a metallic paint. Characteristics of metallic paint: Strictly speaking, metallic paint is mainly divided into solvent-based metallic paint and water-based metallic paint. Solvent-based metallic paint typically includes acrylic metallic paint and fluorocarbon metallic paint. Advantages of metallic paint: Its advantages include easy drying and curing, strong chemical affinity, high transparency, and a more lustrous appearance. Water-based metallic paint mainly includes water-based baking metallic paint and water-based air-drying metallic paint, which are characterized by high hardness, scratch resistance, strong adhesion, and environmental friendliness, making them beneficial for environmental protection.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.