What is the reason for the tire pressure system malfunction in the Audi A3?

1 Answers
LaElijah
07/29/25 8:04pm
Audi A3 tire pressure system malfunction is caused by a tire with pressure that is too low or too high. Introduction to tire pressure system malfunction: Tire pressure system malfunction refers to the car's tire pressure monitoring system, which uses highly sensitive wireless sensors fixed inside the car tires to collect data such as tire pressure while driving or stationary, and then feeds this data back to the system to remind the owner to check the tire pressure. Function of tire pressure monitoring: It monitors the pressure status inside the tires in real time. When the temperature is high, tire rolling resistance increases, or friction with the ground intensifies, the pressure inside the tires becomes greater than usual.
Was this review help?
12
5
Share
More Forum Discussions

What is a Head-Up Display?

Most models' head-up display systems can show vehicle speed, engine RPM, remaining fuel level, navigation information, etc. Here are some relevant introductions about the head-up display system: 1. Many cars are equipped with a head-up display system, which essentially projects information onto the windshield. 2. The head-up display system can show relatively limited information. If more information is displayed, the projection area will be larger, which may affect the driver's line of sight. 3. Some cars do not use a head-up display system, while some more high-end models use full LCD instrument panels. These panels are essentially a large display screen that can show a vast amount of information.
16
0
Share

Where to Take the Motorcycle License Test in Xiamen?

In Xiamen, to obtain a motorcycle license, drivers must register at a training institution and then choose a test location. Here are the specific details about motorcycle licenses: 1. Classification: Regular three-wheeled motorcycle D - three-wheeled motorcycles with an engine displacement exceeding 50ml; Regular two-wheeled motorcycle E - two-wheeled motorcycles with an engine displacement exceeding 50ml; Light motorcycle F - motorcycles with an engine displacement of 50ml or less. 2. Required documents: Original ID card; 8 one-inch white background photos, or electronic one-inch photos; For those taking the test in a different location, a residence permit is also required.
7
0
Share

Do temporary traffic lights have violation cameras?

Mobile traffic lights do not have violation cameras. Here are the relevant details: 1. Location: Violation cameras are fixed installations at major intersections and key locations. Temporary traffic lights generally do not overlap with these positions, and even if they are in roughly the same location, the angles differ. Therefore, violations won't be captured. However, although these are temporary traffic lights, drivers must still comply with road traffic safety laws at such intersections and must not run red lights. 2. Railroad crossings: At railway crossings, two alternately flashing red lights or one steady red light indicate that vehicles and pedestrians must stop; when the red light goes out, passage is permitted. Drivers who fail to slow down when approaching uncontrolled pedestrian crossings may face fines.
2
4
Share

How much cheaper is a one-year-old inventory car?

Generally, a one-year-old inventory car is 10%-30% cheaper than a new car, but the actual discount depends on the specific situation. Here is some related information: Assess the condition of the vehicle based on the length of time it has been in inventory: If there is no obvious aging in parts such as wipers, engine belts, and tires, at least the storage environment is not too bad. If the inventory car is dirty, it should be thoroughly cleaned before carefully inspecting the paint surface for scratches and dents. If these aspects are fine, it indicates that the inventory car has been properly maintained and is not significantly different from a new car. Finally, it is best to test-drive the car to confirm its condition.
9
4
Share

What does the serrated line on the highway mean?

Highway The serrated line on the highway is called a longitudinal deceleration marking. Here is the relevant content introduction: 1. Longitudinal deceleration marking: It is a set of diamond-shaped dashed lines parallel to the lane dividing line. It is generally set at bridge approaches and turning points. The main function of this serrated line is to create a sense of compression by visually narrowing the lane, prompting drivers to automatically slow down at curves, slopes, and other locations where deceleration is required. 2. Specific situation: When a vehicle passes through a section with longitudinal deceleration markings, the driver's subjective vision will perceive the lane as gradually narrowing, prompting them to take deceleration measures and proceed slowly. This can effectively prevent drivers from applying emergency brakes just before the stop line.
17
5
Share

Difference Between 92H and 91V Tires?

Tire 92H and 92V differ in their maximum driving speeds. Below are the relevant details: 1. 92 refers to the tire load index of the car tire, while H and V represent the speed ratings of the tire. The H rating has a maximum speed limit of 210 km/h, whereas the V rating allows for a maximum speed of 240 km/h. 2. Structurally, tires can be categorized into radial tires and bias tires. Based on tread patterns, they can be divided into rib pattern tires, transverse pattern tires, and mixed pattern tires. In terms of size, they can be classified as full-size spare tires and compact spare tires. Tires are in direct contact with the ground, providing the car with good comfort and smooth driving performance.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.