What is the reason for the SVS indicator on the dashboard?

What is needed for the first car maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice, to be taken to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific timing varying by vehicle, generally around 5,000 kilometers or six months. It is crucial to attend the first maintenance on time, neither early nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speeds as required by the vehicle. The timing for the first maintenance is calculated from the date of vehicle pickup, with two indicator values: mileage and time. Whichever comes first serves as the standard. The first maintenance includes: oil change, oil filter replacement, cleaning the air filter, checking various fluid levels, inspecting the generator belt and wiper blades for damage, checking tire pressure, and examining tires for damage or bulges. Estimated time required: Approximately 2 hours to complete all tasks. The most critical aspects of a new car's first maintenance are the oil and oil filter change. When changing the oil, the oil filter must also be replaced. The choice of oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It is important to note that the interior should not be directly washed with water. If floor mats are dirty, use a vacuum cleaner or remove them to brush with detergent, dry, and then replace. The rubber mats under the driver's floor have many drainage holes. Water entering these areas will not dry but flow through the holes to corrode components like the gearbox. The best practice is to vacuum clean and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it is recommended to drain the existing antifreeze and refill with the same brand from the start. Different brands of antifreeze have varying chemical properties, and mixing them can lead to corrosion due to incompatible inhibitors. Avoid mixing brands to prevent unnecessary issues. Do not lubricate wheel bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. However, applying lubricant to wheel bolts and nuts can pose safety risks. At high speeds, bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: EFI cars differ from conventional vehicles, as their fuel injection control system can automatically adjust fuel supply based on the engine's temperature and operating conditions, ensuring smooth starting.

10

1

Share

How to Turn on the Tesla Heater?

After starting the vehicle, wait for 5-10 minutes until the water temperature rises to the normal level, then you can turn on the heater. Adjust the car's air conditioning circulation mode to internal circulation to help the cabin heat up quickly. Later, switching to external circulation as needed will help with air circulation inside the cabin. When the heater is turned on, the fan will operate, slightly increasing fuel consumption. Do not press the AC button. Adjust the air conditioning to a suitable setting and direct the airflow as desired. Maintain the cabin's temperature, humidity, and cleanliness at optimal levels.

17

0

Share

What to Do When Lithium Battery Range Decreases?

Compared to summer, the resistance increases in winter. To achieve the same power output, the current must be increased, making the battery appear to deplete faster. The internal resistance of lithium-ion batteries is related to temperature. The lower the temperature, the higher the internal resistance, which is why battery consumption is particularly rapid in winter. In summer, the maximum charging time can reach up to 12 hours. However, in winter, it is best not to exceed 8 hours, with 6 hours being optimal to avoid the risk of battery swelling. Gradual acceleration is recommended to maximize battery range and durability.

1

4

Share

What kind of car is Haval?

Haval is a Great Wall Motor brand, specifically known for its SUV models. Taking the 2021 Haval as an example, it belongs to the compact SUV category with the following dimensions: length 4653mm, width 1886mm, height 1730mm, wheelbase 2738mm, front track 1585mm, rear track 1581mm, fuel tank capacity 58 liters, and trunk capacity 347 liters. The 2021 Haval is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 211PS, maximum power of 155kW, maximum torque of 325Nm, paired with a 7-speed dual-clutch transmission.

18

0

Share

What to Do After Your Driver's License Expires?

If your driver's license has expired within the past year, you can still renew it normally, but you must not drive on the road before renewal. Below is additional information regarding expired driver's licenses: 1. Expired or revoked driver's license: Although the validity period of a driver's license is indicated on the inner page, many people overlook it. If your license has been expired for less than one year, you can renew it by submitting the required materials to the DMV within one year of expiration. 2. Driving with an expired license: If you drive with an expired license, you will face fines for the violation. If you continue to drive after your license has been revoked, you may face fines and could potentially be subject to administrative detention.

17

2

Share

How to Turn On the Heater in a Camry?

First, start the car and wait approximately 4-5 minutes until the water temperature reaches the normal operating level. Then, you can activate the heating mode. After turning on the air conditioning, switch the circulation mode to internal circulation and adjust the heating mode to the red zone. Once the appropriate air conditioning level is set, adjust the direction of the air vents. Ensure proper indoor air circulation. Keeping doors and windows closed for extended periods while using the air conditioning can lead to oxygen deprivation indoors, so remember to ventilate by opening windows occasionally.

20

4

Share

What is the reason for the SVS indicator on the dashboard?

What is needed for the first car maintenance?

How to Turn on the Tesla Heater?

What to Do When Lithium Battery Range Decreases?

What kind of car is Haval?

What to Do After Your Driver's License Expires?

How to Turn On the Heater in a Camry?

How to Calculate the Purchase Tax for a 1.5T Car?

What is the solution for the Beijing Hyundai Mistra sunroof making abnormal noises?

What to Do When a Vehicle Stalls in Water

Where to Place the ETC Tag?