What is the reason for the sunroof leakage in the Tank 300?

2 Answers
DeJune
08/27/25 5:13am
The sunroof leakage in the Tank 300 is due to improper sealing at the rear seam of the sunroof. Here are some details about car sunroofs: 1. Working Principle: The car sunroof acts as a natural air purifier, utilizing the principle of negative pressure ventilation. When the car is in motion, the airflow over the roof creates negative pressure inside the vehicle, which helps to draw out the interior air. 2. Function: It can assist in cooling the car. Opening all windows helps in dissipating heat from the interior. Similarly, by using negative pressure to exchange air, the sunroof allows outside air to enter the vehicle, expelling odors caused by sun exposure and ensuring more uniform and gentle air conditioning.
Was this review help?
14
2
Share
AliyahAnn
09/09/25 4:13am
I've been driving the Tank 300 for over two years and have indeed encountered the annoying issue of sunroof leakage. The main problem lies in the drainage system. The four drainage holes are hidden at the ends of the guide rails and are particularly prone to getting clogged with mud, sand, and leaves. After a heavy rain last time, water dripped into the car. When I took it to the repair shop and had the headliner removed, I discovered that the right front drainage tube was kinked, causing water to seep back through the connection. I usually didn't pay attention to the sealing strips during maintenance. Under long-term exposure to the sun, the rubber cracked and aged, allowing water to seep in through the gaps during rain. Deformation of the guide rails is also a hidden danger. Frequent forceful closing of the sunroof can easily cause deformation, leading to poor sealing of the frame. Now I've learned my lesson. Every time I wash the car, I ask the technician to use an air gun to clear the drainage holes. Before the rainy season, I check the condition of the sealing strips myself, which has saved me a lot of trouble.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Where is the spark plug of Wuling Rongguang?

The spark plug of Wuling Rongguang is installed on the side or top of the engine. In early models, the spark plug was connected to the distributor via ignition cables, but over the past decade, most car engines have been modified to directly connect the ignition coil to the spark plug. Working principle of spark plugs: The ground electrode of the spark plug is connected to the metal shell, which is threaded into the engine block through the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. The following standards can be referenced for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
14
2
Share

How to Handle a Vehicle Accident Where the Other Party is Fully at Fault?

Survey and damage assessment inspectors must complete on-site surveys and inspections within 1 working day after receiving notification from the insurance company's internal staff; All claims must be calculated and reviewed within 3 working days, then submitted to the claims department head for verification. Settlement and case closure.
13
4
Share

How many times should the headlights alternate between high and low beam in Subject 3?

In Subject 3, the headlights should alternate between high and low beam two or more times, typically three times. Additional information is as follows: Subject 3: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is a part of the motor vehicle driver's license assessment. It is the abbreviated term for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. Alternating between high and low beam operation: When an oncoming vehicle is within 150 meters, the high beam should be switched to low beam. If the other party does not switch to low beam, immediately reduce speed and continuously alternate between high and low beam to signal. If the other party still does not change, slow down and pull over to the right to yield. Avoid engaging in a battle of bright lights, as it may impair both drivers' vision and lead to an accident.
11
0
Share

Does the Toyota Corolla have a timing belt?

Toyota Corolla uses a timing chain, not a timing belt. The specific details are as follows: 1. Rubber timing belts wear out over time along with other components such as tensioners, idler pulleys, and water pumps as the engine operates. 2. For engines equipped with timing belts, manufacturers have strict requirements to replace the timing belt and related components at specified intervals. 3. Timing chains, made of high-strength steel, effectively solve this issue. The strength of metal far exceeds that of rubber, significantly reducing deformation and making the occurrence of skipped teeth or breakage extremely rare.
12
3
Share

How to Remove a Diesel Fuel Filter?

Release the residual pressure in the fuel system. Locate the grounding wire and mounting bracket screws near the filter, then remove them. Next, detach the fuel inlet pipe and also remove the fuel outlet pipe beside the filter. Remove the old filter, place the new filter directly into the mounting bracket, and reconnect the fuel outlet pipe and grounding wire in reverse order.
10
4
Share

How is Car Horsepower Calculated?

Power (W) = 2π × Torque (N-m) × RPM/60. The horsepower of an engine refers to the output capacity of the engine, which is the output power. Power (kW) = Torque (N-m) × RPM (rpm)/9549. This is how the horsepower of a car is calculated.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.