What is the reason for the sudden dimming of the Envision dashboard lights?

What is the appropriate engine RPM?

During normal driving, it is generally appropriate to keep the engine RPM around 2200-2500. Below are specific details about the suitable engine RPM: 1. Regardless of the gear, maintaining the engine RPM around 2200-2500 is the most fuel-efficient. 2. When shifting gears, slightly increase the throttle more than during normal driving to allow the RPM to exceed 2500. If shifting gears below 2000 RPM, the speed will drop after shifting, giving a feeling of gear disengagement and increasing fuel consumption. 3. If you usually drive with RPM consistently below 2000, it is recommended to occasionally rev the engine to higher RPMs (above 3000 RPM for about half an hour), which helps prevent and clear carbon deposits in the fuel system.

1

4

Share

What to Do When the Vehicle Stability Control System Warning Light Comes On?

Solutions for when the vehicle stability control system warning light comes on are as follows: 1. If the indicator light remains on, it may indicate that the electronic stability control system has been turned off, usually due to accidental operation by the owner. If the vehicle is equipped with a system button, the owner can try turning it back on. If successful, the indicator light will turn off. 2. If the indicator light remains on, it indicates a fault in the electronic stability control system, and the owner should take the vehicle to a nearby repair shop for inspection as soon as possible. Reasons for the vehicle stability control system warning light coming on are as follows: 1. The most likely reason for the vehicle stability control system warning light to come on is a fault in the ESP system; 2. If accompanied by the steering wheel warning light, it is usually due to an issue with the vehicle's wheel speed sensor.

11

1

Share

Will a 30 km/h speed limit on highways actually be monitored by speed cameras?

Highway speed limits of 30 km/h will not be monitored by speed cameras, as regulations generally prohibit the installation of mobile speed monitoring devices on road sections with speed limits below 50 km/h (exclusive). If a motor vehicle violates the speed limit but exceeds it by no more than 10% without causing any consequences, traffic authorities will issue a warning under the following circumstances: 1. Vehicles exceeding the speed limit by less than 50% on roads with speed limits below 60 km/h; 2. Medium or large passenger trucks, school buses, or hazardous material transport vehicles exceeding the speed limit by less than 10% on roads other than highways or urban expressways; 3. Vehicles other than medium or large passenger trucks, school buses, or hazardous material transport vehicles exceeding the speed limit by less than 10%; 4. Vehicles driving on highways at speeds less than 20% below the specified speed limit.

3

Share

What vehicles can a C1 driver's license drive?

C1 permitted vehicle types: The C1 driver's license allows driving small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with seating capacity of 9 or fewer. C1 driver's license restrictions: The C1 license does not permit driving large buses, tractors, city buses, medium-sized buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, mopeds, wheeled self-propelled machinery, trolleybuses, or tramcars. Additionally, the C1 license does not allow driving vehicles with more than 9 seats or trucks with an overall length exceeding 6 meters. About C1 driver's license: The C1 driver's license is one of the codes for motor vehicle driver's licenses. It permits driving small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with seating capacity of 9 or fewer.

9

5

Share

What are the precautions for driving in rainy weather?

Here are the specific precautions for driving in rainy weather: 1. Maintain good visibility. Besides driving cautiously in the rain, promptly turn on the windshield wipers. When the weather is dim, also turn on the low beams and fog lights. If there is frost on the front windshield, turn on the air conditioning and direct the cold air toward the front windshield. If there is frost on the rear windshield, turn on the rear windshield heater to quickly eliminate the frost and avoid obstructing the view of vehicles behind. 2. Drive slowly in low gear. Regardless of the road width or surface condition, drive in second or third gear at a speed not exceeding 30 or 40 kilometers per hour. Always pay attention to the distance between vehicles in front and behind you and be mentally prepared to take emergency measures. When parking, try to decelerate about 100 meters in advance and brake lightly to give following vehicles enough time to react. 3. Prevent wheel skidding. Rainwater on the road forms a "lubricant" with the tires, reducing the car's braking performance and making it prone to skidding. Therefore, the driver should hold the steering wheel with both hands, maintain straight and low-speed driving, and when turning, gently apply the brakes to prevent the tires from locking up and causing the vehicle to skid. 4. Turn on the lights promptly. In heavy rain with extremely low visibility, turn on the headlights, position lights, and taillights, and move the vehicle off the road or park it in a safe place.

15

2

Share

What Causes Low Oil Pressure?

Here are the specific reasons for low engine oil pressure: 1. The oil does not meet the requirements, the viscosity is too low, or the oil level in the crankcase is too low. 2. The oil pump's intake filter screen is clogged, resulting in insufficient oil pumping. 3. The oil pump gears are excessively worn, reducing the pump's oil delivery capacity. 4. The pressure relief valve in the main oil passage opens at too low a pressure, causing premature and excessive oil return. 5. The oil filter element is clogged, increasing the oil intake resistance. 6. Excessive clearance in lubricated parts, especially in the crankshaft main bearings and connecting rod bearings, leads to excessive oil leakage. Excessive clearance between the piston and cylinder wall causes increased oil temperature due to gas leakage, resulting in reduced viscosity. 7. Oil leakage from the front and rear crankshaft oil seals, main oil passage plugs, or oil pipes. 8. The oil pressure gauge, sensor failure, or oil passage blockage leads to inaccurate measurements.

20

3

Share

What is the reason for the sudden dimming of the Envision dashboard lights?

What is the appropriate engine RPM?

What to Do When the Vehicle Stability Control System Warning Light Comes On?

Will a 30 km/h speed limit on highways actually be monitored by speed cameras?

What vehicles can a C1 driver's license drive?

What are the precautions for driving in rainy weather?

What Causes Low Oil Pressure?

What brand is EVERSHINE tires?

What is the recommended tire pressure for a van?

Can You Lock the Car Doors with the Windows Open?

What to Do When the Windshield Wipers Leave a Blurry Streak?