What is the reason for the sudden blackout of the central control display screen?

1 Answers
Emmy
07/25/25 12:12pm
The reasons for the sudden blackout of the central control display screen are: 1. The power supply to the display screen is abnormal, and the power supply module needs to be replaced; 2. Poor contact of the wiring harness, replace the wiring harness; 3. The display screen is damaged, replace the display screen for testing. If it returns to normal, it indicates the display screen is damaged. If the issue persists, with normal power supply and good wiring harness contact, check the video output signal of the motherboard and replace the motherboard for testing. The functions of the car central control include: 1. The central lock actuator can be used to execute the driver's instructions to lock or unlock the door; 2. Control the adjustment of memory seats, music system adjustment, entertainment system adjustment, roof camera function, automatic parking, etc.
Was this review help?
1
4
Share
More Forum Discussions

Is there a five-seat version of the BMW X7?

BMW X7 does not have a five-seat version. It comes standard with seven seats in a 2+3+2 layout, with the option for two independent middle seats. Below is some information about the BMW X7: 1. Features: All seats come standard with heating, while front seats offer optional ventilation and massage functions. Rear entertainment is also optional, including a screen, Bluetooth DVD, two sets of independent headphones, and an HDMI interface. 2. Models: The BMW X7 initially offers four models: xDrive50i, xDrive40i, xDriveM50d, and xDrive30d.
7
5
Share

How to Adjust the Clock in the 7th Generation Honda Accord?

7th generation Accord time adjustment can be done by pressing the "CLOCK" button. The clock adjustment steps for the 7th generation Accord are as follows: 1. After powering on the vehicle, locate the "SOUND" button on the center console panel, with "CLOCK" labeled on its right. Press and hold the "SOUND" button, then release after hearing a "beep" sound. 2. The time display on the LCD screen will start flashing. Find the "NR" button and "DISC-" button on the center console panel. 3. Use the "NR" and "DISC-" buttons to adjust the time display. The "NR" button is labeled with H below it, used for adjusting the hour display; the "DISC-" button is labeled with M below it, used for adjusting the minutes. 4. Once the time is accurately adjusted, press the "SOUND" button again to save the settings.
15
5
Share

How to Remove Yellow Spots on a White Car?

Methods to remove yellow spots on a white car are as follows: 1. Purchase a high-quality clay bar and prepare sufficient water. Rub the clay bar dipped in water vigorously on the yellow spots, then rinse with clean water. 2. Spray an appropriate amount of iron remover on the yellow spots and let it soak for 4 to 6 minutes. Rinse thoroughly with water, and if necessary, use a cleaning solution. Ensure no iron remover residue remains on the car body. 3. Visit a 4S store for car polishing, waxing, and ceramic coating. Always polish and wax before applying the ceramic coating. 4. Prepare a small amount of aged vinegar and scrub with gauze, but ensure enough clean water is available. Immediately rinse after scrubbing with vinegar. Any acidic solvent must be thoroughly rinsed off with clean water after use.
15
0
Share

What to Do When the Jetta Fuel Measurement System Is Too Rich?

The fuel detection system of the car being too rich indicates that the air-fuel mixture is too rich. It is necessary to promptly check whether the pressure of the car's intake system and the fuel pressure are within a reasonable range. If the pressure exceeds the standard, the faults in the car's intake system need to be repaired in time. Here is some information about the fuel system: 1. The function of the fuel system is to supply the engine with a certain amount of clean, well-atomized gasoline according to the operating conditions of the engine, so that it can mix with a certain amount of air to form a combustible mixture. 2. The fuel system also needs to store a considerable amount of gasoline to ensure that the car has a considerable driving range.
5
1
Share

What is the difference between plug-in hybrid and hybrid electric vehicles?

There are two main differences between plug-in hybrid and hybrid electric vehicles: 1. Power aspect. Plug-in hybrids primarily aim to enhance vehicle performance, while hybrid electric vehicles, predominantly Japanese models, focus on fuel efficiency. During registration, they are often labeled as energy-saving vehicles, such as Toyota's Dual Hybrid, whose power output is similar to or even slightly weaker than conventional fuel versions. 2. Driving aspect. Plug-in hybrids are typically equipped with large batteries, enabling pure electric driving for 50-100 kilometers. If battery costs decrease, this range may increase in the future. Hybrid electric vehicles only have small batteries and can hardly drive purely on electricity. Although they feature an EV mode, the engine must start to assist charging after just 1-2 kilometers of pure electric driving.
14
3
Share

Can the Honda Odyssey Hybrid Get a Green License Plate?

No, all hybrid models of the Odyssey are HEV (Hybrid Electric Vehicles), which fall under the category of new energy vehicles but are not eligible for green license plates. Below are the types of new energy vehicles that can obtain green license plates: 1. Pure Electric Vehicles (PEV): These vehicles derive their power from electric motors, with energy sourced from battery packs. 2. Plug-in Hybrid Electric Vehicles (PHEV): These hybrid vehicles can charge their battery packs via an external power source and also allow manual selection of power supply modes. 3. Fuel Cell Electric Vehicles (FCEV): These vehicles convert electrical energy generated from chemical reactions between hydrogen and oxygen into kinetic energy to drive the vehicle, with no environmental impact.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.