What is the reason for the seat belt not fastening?

Does the Hyundai Verna only have one reverse light?

There are three brake lights on the Verna. They are located at both ends of the rear of the car and the upper part of the rear. Brake lights are generally installed at the rear of the vehicle, with the main color being red to enhance the penetration of the light source, so that vehicles behind can easily detect the braking of the vehicle in front even in low visibility conditions, thereby preventing rear-end collisions. The solutions for a continuously lit brake light are as follows: 1. Check the brake fluid. If the brake light is on due to insufficient brake fluid, replenishing the brake fluid in time will turn off the brake light; 2. Check the brake switch. After disassembling and repairing the switch, the brake light can be turned off; 3. Check the brake pads to see if they are worn or aged. If the thickness of the brake pads is below the specified value, they should be replaced promptly. After replacing the brake pads, the brake light will turn off.

6

0

Share

Where can I find the vehicle production date?

Vehicle production date can be checked from two locations: the co-driver side and the vehicle certificate. Details are as follows: 1. Below the B-pillar on the co-driver side, visible when opening the door. This nameplate only shows year and month, and includes the vehicle's VIN. 2. The certificate that comes with new vehicles, located at the upper right corner of the certificate. The production date marked here can be precise down to year, month, and day. Note: This doesn't apply to all vehicle models. When new vehicles arrive at dealerships, there will be a paper nameplate on the windshield in front of the driver's seat. This paper nameplate displays the VIN and MIIT fuel consumption. If the bottom of the paper nameplate shows the date down to year, month, and day, then this production date can serve as a reference. If the nameplate only shows year and month, it cannot be considered as the production date.

18

3

Share

What causes the clicking sound in the rear wheels when braking in a Volkswagen?

Volkswagen rear wheels making a clicking sound when braking could be due to abnormal noise from the clutch, drive shaft, differential, or even the tires. If the noise only occurs during braking, it is necessary to check whether there are any foreign objects stuck between the brake pads and brake discs. If the brake system is functioning properly, the tires and suspension system should be inspected. During braking, the vehicle's center of gravity shifts forward, increasing pressure on the front axle. If the noise occurs every time you brake, there may be an issue with the front axle. In daily use, if the car produces abnormal noises, it is important to promptly visit a 4S shop for inspection and repair. After replacing the brake pads, clicking sounds may occur during each brake application as the new brake pads have not yet adapted to the brake discs.

8

5

Share

Can Modified Wheel Size Pass the Annual Inspection?

Modifying wheels is a relatively conspicuous modification. If the wheel modification is not registered with the vehicle management office, it will not pass the annual inspection. Introduction to Wheels: Wheels are the rotating part of the tire's inner rim connected to the hub through spokes, which is the metal component mounted on the axle that supports the tire. Also known as rims, steel wheels, or simply wheels. Wheels come in various types based on diameter, width, forming method, and material. Types of Wheels: Depending on the characteristics and needs of different vehicle models, the surface treatment process of wheels also varies, mainly divided into painting and plating. For ordinary vehicle models, the appearance of wheels is less considered, with good heat dissipation being a basic requirement. The process mostly involves painting, which includes spraying followed by baking, making it cost-effective with vibrant colors that last long, even when the vehicle is scrapped. Many mass-market vehicle models use painted wheels. Some fashionable and dynamic colored wheels also employ painting technology.

18

0

Share

Is the Venucia D60 compliant with China VI emission standards?

Some models of the Venucia D60 comply with China VI emission standards, while others meet China V standards. The China VI-compliant models are sold in regions where the China VI standards have been implemented, and the China V-compliant models are available in areas where the China VI standards have not yet been enforced. Below is some relevant information about the Venucia D60: 1. The Venucia D60 is a compact sedan, equipped with a 1.6-liter naturally aspirated engine across all variants. The engine, coded HR16, delivers a maximum power of 93 kW, a maximum torque of 154 Nm, with peak power achieved at 5,600 rpm and peak torque at 4,000 rpm. This engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. The Venucia D60 employs a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. The vehicle is equipped with an electric power steering system, which provides a lighter steering feel.

6

1

Share

Where is the air conditioning filter element of the Haifuxing located?

The air conditioning filter element of the Haifuxing is located under the glove box on the passenger side. Here are some relevant details: 1. If the filter element is dirty, you can clean it by blowing compressed air from the reverse side. Operation method: Hold the air gun 5 cm away from the filter element and blow at a pressure of 500 kPa for about 2 minutes. The air filter element is very prone to dust accumulation. Use compressed air to remove the dust, but never wash it with water, as this can easily cause damage. 2. The Haifuxing is a compact car launched by FAW Haima, with body dimensions of 4464mm in length, 1695mm in width, and 1425mm in height, and a wheelbase of 2610mm. The Haifuxing is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 111ps and a maximum torque of 147nm, paired with a 5-speed manual transmission.

12

4

Share

What is the reason for the seat belt not fastening?

Does the Hyundai Verna only have one reverse light?

Where can I find the vehicle production date?

What causes the clicking sound in the rear wheels when braking in a Volkswagen?

Can Modified Wheel Size Pass the Annual Inspection?

Is the Venucia D60 compliant with China VI emission standards?

Where is the air conditioning filter element of the Haifuxing located?

What are the types of front and rear suspension on the Atenza?

What is the ground clearance of the Honda URV?

What is the model of the Volkswagen Golf transmission?

What is the circuit range performance of the Ford Kuga fuel pressure sensor B?