What is the reason for the PS light on the car?

1 Answers
OMadeline
07/30/25 4:53am
The reason for the PS light on the car is that the steering wheel is locked. The method to unlock the steering wheel: 1. Insert the key; 2. Turn the steering wheel and the key in the same direction simultaneously; 3. If the unlocking is not successful, slightly turn the steering wheel left and right until the key can be turned smoothly, then the lock will be released. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque and then transmit it to the steering shaft. It is mainly composed of a skeleton, foam, and installation clips or screw holes corresponding to the driver's airbag (DAB).
Was this review help?
11
3
Share
More Forum Discussions

What Are the Main Functions of Automotive Sensors?

Automotive sensors serve many primary functions. Oxygen Sensor: The function of this sensor is to measure whether there is excess oxygen in the exhaust gases after engine combustion, i.e., the oxygen content, and convert this information into a voltage signal sent to the engine computer. This enables the engine to achieve closed-loop control targeted at the excess air factor. Wheel Speed Sensor: The wheel speed sensor is used to measure the rotational speed of the vehicle's wheels. Common types of wheel speed sensors include: magnetic wheel speed sensors and Hall-effect wheel speed sensors. Coolant Temperature Sensor: The function of the coolant temperature sensor is relatively straightforward—it utilizes changes in its internal resistance to alter the current passing through it, thereby driving the changes in the coolant temperature gauge.
8
3
Share

What does the first and second maintenance mean?

First and second maintenance refers to the abbreviation of the second-level maintenance or second-level servicing of a car. Below is a related introduction to car maintenance: Engine oil change: The main function of engine oil is to provide good lubrication for the engine. Upon reaching the maintenance cycle, basic maintenance requires changing the engine oil to ensure its good performance and the lubrication effect of the engine. The engine oil should be changed according to the car's basic maintenance cycle. Common car maintenance cycles are 5,000 kilometers or 6 months, and 10,000 kilometers or 12 months, whichever comes first. Oil filter replacement: The oil filter, also known as the oil filter element, is mainly used to filter impurities in the engine oil to maintain its performance. After a period of use, its filtering performance will decline. Therefore, when changing the engine oil, the oil filter should also be replaced.
4
1
Share

Should the Accord use 92 or 95 octane gasoline?

If it is an Accord equipped with a turbocharged engine, it is recommended to use 95 octane gasoline. For older Accord models with naturally aspirated engines, 92 octane gasoline is sufficient. The octane rating of gasoline represents the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the octane number, the stronger the anti-knock performance. Standard gasoline is composed of isooctane and n-heptane. A higher octane number does not necessarily mean better performance; the appropriate gasoline grade should be selected based on the engine's compression ratio. Different gasoline grades correspond to different engine compression ratio requirements. The higher the engine's compression ratio, the higher the required gasoline grade. Generally, engines with a compression ratio above 8.0 should use 92 octane gasoline; those above 9.0 should use 95 octane gasoline; and those above 10.0 should use 98 octane gasoline. For vehicles that have been in long-term use, adding a gasoline additive to the fuel tank can effectively remove carbon deposits, sludge, and other deposits in the engine's fuel system. After using a gasoline additive, the vehicle may exhibit stronger power, better fuel economy, improved idle stability, and reduced emissions.
17
1
Share

Is It Harmful to Install Ambient Lights by Dismantling Car Doors?

Installing ambient lights will not cause any damage to the car. Ambient lights are also equipped with fuses during installation, so short circuits or open circuits will not affect other components. However, it may have an impact on the car's battery, so it is recommended to turn off the ambient lights when the engine is not running. The functions of car ambient lights: Car ambient lights can enhance the in-car experience, elevate the overall grade of the vehicle, and showcase different in-car atmospheres. They can help soothe the driver's mood and change the monotonous state of the car at night, making it more recognizable. Additionally, modern ambient lights offer multiple color options and feature voice-controlled switching functions. Precautions for installing car ambient lights: Ambient lights are typically LED-type lights, which are very flexible in material and can be installed in any location. However, installation must be reasonable, usually placed in the fine seams of door panel edges or under the center console. Please ensure that the brightness of the installed ambient lights is not too high and does not interfere with normal driving behavior.
9
4
Share

Will a Motorcycle Explode if Ridden with an Oil Leak?

Riding a motorcycle with an oil leak can cause an explosion because the leaked gasoline can ignite when exposed to the hot engine, leading to an explosion. There are many consequences of motorcycle oil leaks. Quality Issues: Poor quality of products (parts) and materials; substandard craftsmanship; structural design flaws. Improper Assembly and Adjustment: Unclean mating surfaces; damaged, displaced, or improperly installed gaskets. Uneven Tightening of Fastening Nuts: Thread stripping, broken fasteners, or loose components leading to operational failure. Exceeding Service Life: Wear and tear of sealing materials beyond limits after prolonged use; aging, deterioration, or deformation leading to failure. Oil-related Issues: Excessive lubrication, oil level too high, or incorrect oil type used. Warped mating surfaces or damaged casings causing oil leakage.
10
4
Share

Can One Possess Both a Motorcycle License and a Car License Simultaneously?

One can possess both a motorcycle license and a car license at the same time. Below are the relevant introductions for both: Motorcycle License: The driving licenses for motorcycles are D, E, and F licenses. A D license allows driving all two-wheeled and three-wheeled motorcycles, an E license permits driving all two-wheeled motorcycles, and an F license is only for driving lightweight motorcycles with an engine displacement below 50CC. Car License: The permitted vehicles for a small car license include small and micro passenger vehicles, as well as light and micro cargo vehicles; light and micro special operation vehicles. Other permitted vehicle types: C2, C3, C4.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.