What is the reason for the power steering light coming on and disappearing after a restart?

Can an Electronic ID Card Be Used for the Subject 2 Driving Test?

An electronic ID card cannot be used for the Subject 2 driving test; a physical ID card is required for verification. Therefore, it is essential to bring the original ID card when taking the Subject 2 test. The examinee's information is verified through the ID card to ensure accurate identification before the test begins. If the ID card is lost, a temporary ID card can be obtained from the local public security bureau before the test. A temporary ID card holds the same legal validity as a regular ID card and can be used for the Subject 2 test. Materials required for applying for a temporary ID card: Household register (original copy of the applicant's household registration), photo (one recent passport-sized color photo), and application form (the "Application Form for Temporary Resident ID Card" and receipt issued by the local police station). Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It refers to the field driving skills test, which includes the following components: Reverse Parking: The examinee must reverse into the garage from the right starting point once, then drive to the left and reverse into the garage again before returning to the starting point. No stopping is allowed during the process. Parallel Parking: The vehicle must be driven parallel to the garage in the forward direction, then reversed into the garage to the right rear without any pauses. 90-Degree Turn: The examinee must complete the turn without crossing the line or stopping midway. Hill Start and Stop: The examinee must drive to the hill start test point, ensuring the front wheels stop exactly on the line. After passing this part, the examinee must perform a hill start without rolling backward. Any mistake may result in point deductions or failure. S-Curve Driving: This involves navigating a lane with two turns greater than 40 degrees in one go without stopping, crossing the line, or going out of bounds. The test is scored out of 100, with deductions of 20, 10, or 5 points for errors. A score of 80 or above is required to pass. Important Notes for the Subject 2 Test: Maintain a calm mindset during the Subject 2 test. Wear comfortable clothing, avoid excessive nervousness, and familiarize yourself with each test step. For example, after entering the vehicle, adjust the seat first, then fasten the seatbelt only when everything is correctly set before starting the test. Maintain a steady speed during the test, avoid crossing lines, accurately follow reference points, and perform each test item carefully. After passing the test, drive the vehicle back to the starting position, confirm the results by signing, and then turn off the engine.

13

0

Share

What does the yellow exclamation mark mean in a BMW?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. There are many indicator lights on the car dashboard that feature an exclamation mark, such as the tire pressure indicator, lighting fault indicator, steering system fault indicator, brake system fault light, transmission fault indicator, and windshield wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or that the transmission fluid level is below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses and an exclamation mark below represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or check yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights, to identify the issue. In addition, during daily vehicle use, the warning lights displayed on the dashboard are divided into two colors, yellow and red, indicating different levels of severity: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair shop to eliminate potential safety hazards. Red indicates a very serious issue in the corresponding system. In such cases, do not continue driving. Pull over safely and seek professional assistance to prevent unpredictable risks to the vehicle and personal safety. It is important to note that when starting the car, all warning lights will illuminate briefly as the system performs an automatic check. If a light does not turn on when the ignition is switched on, remains lit, or illuminates while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect and resolve the issue to ensure safety.

11

5

Share

What are the effects of tire aging?

The following are the impacts of aging tires: 1. Increased risk of blowouts: Tire aging is one of the common causes of blowouts. As tires age, their surfaces harden, making them prone to small cracks. This increases the risk of blowouts and air leaks due to cracking. 2. Impact on vehicle performance: Tire aging directly affects the safety performance of the vehicle, such as braking distance and stability. It can easily lead to safety accidents, especially in snowy or rainy conditions, where aged tires may cause braking issues, increasing the likelihood of traffic accidents in adverse weather.

4

0

Share

What is the difference between SUV wheelbase and sedan wheelbase?

SUV wheelbase is shorter than sedan wheelbase. The following is relevant information about SUVs:1. Product features: SUVs are characterized by strong power, off-road capability, spacious comfort, and excellent cargo and passenger carrying functions. SUV passenger space performance is relatively outstanding, whether in the front or rear seats, passengers can sit comfortably. The front seats provide excellent wrapping and support, and there are multiple storage compartments inside the car for daily convenience.2. Models: The world's top SUVs, represented by the American Jeep Grand Cherokee, the British Land Rover Range Rover, and the German Mercedes-Benz G-Class, have become one of the symbols of the wealthy class.

19

4

Share

Can Broken Car Wires Be Repaired?

Broken car wires can be repaired. For cases where the wire insulation is worn out due to aging or gradual wear during driving, those with DIY skills can temporarily wrap the damaged area and then take the vehicle to a repair shop or 4S dealership. If the wire damage is visibly severe and the wires are nearly touching each other, immediate treatment is recommended to prevent other malfunctions. When installing devices like dash cams or reverse navigation systems that require wire cutting, ensure all unaffected wires are properly disconnected and reconnected. Broken car wires can easily lead to short circuits, posing significant safety hazards. In severe cases, it may even cause vehicle fires, so cutting wires to install additional equipment should be avoided whenever possible.

3

0

Share

What Causes Loss of Communication with the Body Control Module?

Loss of communication with the body control module may be due to unreliable battery contact connections or network signal loss. Here is relevant information about the body controller: 1. Functions: Common functions of the body controller include controlling power windows, power mirrors, air conditioning, headlights, turn signals, anti-theft locking systems, central locking, defrosting devices, etc. The body controller can connect with other vehicle ECUs via a bus. 2. Tasks: The primary task of the body controller is to simplify operations, reduce manual operations by occupants, and prevent distraction. The automotive body control system includes safety, comfort control, and information communication systems, mainly used to enhance vehicle safety, comfort, and convenience.

5

4

Share

What is the reason for the power steering light coming on and disappearing after a restart?

Can an Electronic ID Card Be Used for the Subject 2 Driving Test?

What does the yellow exclamation mark mean in a BMW?

What are the effects of tire aging?

What is the difference between SUV wheelbase and sedan wheelbase?

Can Broken Car Wires Be Repaired?

What Causes Loss of Communication with the Body Control Module?

What is the wading depth of the BMW X3?

How effective are lensless LED headlights?

What does the yellow exclamation mark on a Honda car mean?

What tire brand is green?