What is the reason for the non-response of the keyless entry in the Haval H6?

1 Answers
SanAustin
07/30/25 5:10am
Haval H6's keyless entry not responding is due to a dead battery in the car or the key fob. Below are the specific details about the Haval H6: Vehicle Positioning: The Haval H6 is positioned as a compact SUV, available in Blue Label and Red Label versions. Powertrain: It is equipped with two engines, a 1.5T and a 2.0T. The 1.5T engine has a maximum power output of 124kW and a peak torque of 285Nm; the 2.0T engine has a maximum power output of 145kW and a peak torque of 355Nm. CVVL Technology: The 1.5T engine features CVVL technology. CVVL technology primarily allows for adjusting the timing of valve opening and closing, valve lift, and duration, ensuring that the engine receives sufficient air intake under different operating conditions, thereby improving the engine's efficiency.
Was this review help?
19
1
Share
More Forum Discussions

What are the differences between the Tayron and the Tharu?

The differences between the Tayron and the Tharu: 1. Official positioning: The Tayron is positioned as a compact SUV and a midsize SUV, while the Tharu is officially positioned as a compact SUV. 2. Dimensions: The Tayron measures 4589mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm; the Tharu measures 4453mm in length, 1841mm in width, and 1632mm in height, with a wheelbase of 2680mm. 3. Features: The Tayron comes with a full LCD instrument panel, an openable panoramic sunroof, and engine start-stop technology; the Tharu features a panoramic camera, adaptive cruise control, an LCD instrument panel, an 8-inch central control screen, and Beats audio.
5
0
Share

Does it matter if the antifreeze is filled to the brim?

It does matter if the antifreeze is filled to the brim. When the antifreeze is overfilled, the excess will overflow from the pressure relief valve due to thermal expansion and contraction, which can corrode surrounding components. The container for storing antifreeze has a marked line; it should be filled below this line. If there is too little antifreeze, the radiator water may freeze, leading to severe water shortage and causing the engine to overheat. Minor cases may result in the engine cylinder head gasket being blown, while severe cases can cause the engine to seize (commonly known as "locking up"). Antifreeze has excellent performance in preventing freezing in winter, boiling in summer, and preventing scale buildup all year round. It is commonly used in equipment such as cars and internal combustion engine ships. High-quality antifreeze typically has a boiling point of around 110 degrees Celsius, making it less likely to reach boiling point in summer, ensuring the engine operates normally under load.
8
5
Share

How to Avoid Vehicle Skidding?

Avoiding vehicle skidding methods: If the front wheels skid, you should stabilize the throttle and correct the direction to drive out. When the rear wheels skid, turn the steering wheel in the direction of the skid, and after the rear wheels straighten, return to the road. When encountering rear wheel skidding on a downhill slope, you can appropriately press the throttle to increase speed, and after the skid is eliminated, continue driving at the original speed. When going downhill, select medium or low gears, reduce the throttle, and descend slowly—do not coast in neutral. If you encounter uneven road surfaces with sharp turns, braking can easily cause the vehicle to deviate, spin, or even overturn, leading to serious accidents. When meeting oncoming traffic, pay special attention to observing the road surface. Do not randomly turn the steering wheel or brake during the encounter to avoid vehicle skidding and potential collision accidents.
14
3
Share

How often must a new car be driven?

New cars should be driven at least once every 15 days. It is recommended to start the car once a week and drive it every half month, covering a distance of 3-5 kilometers. The main issues with leaving a car unused for too long are: the battery may lose charge if not recharged regularly, making it difficult to start the car; and the tires may deform due to uneven pressure if left in one position for too long. Key points to note when parking a car for an extended period include: 1. Clean the car body and interior thoroughly before parking. Applying wax or a protective coating can help prevent corrosion of the paint. 2. Avoid engaging the handbrake too tightly. The braking system can rust over time due to chemical reactions with moisture and oxygen in the air, as well as rain erosion. 3. To prevent tire deformation, inflate the tires to a higher pressure than usual, around 2.8 bar. Park on a flat surface to minimize tire damage. Parking on uneven surfaces for long periods can also lead to tire deformation.
14
3
Share

What does it mean when the EPS light comes on in a car?

The appearance of EPS on the dashboard indicates a malfunction in the EPS system. Here is an introduction to EPS: 1. EPS stands for Electric-Power-Steering, which is a power steering system that relies on an electric motor to provide auxiliary torque. 2. If the EPS light is displayed on the dashboard, it is recommended to perform a computer diagnostic to identify the issue. If the odometer is not working, it is advisable to repair the odometer first and then perform the computer diagnostic. 3. It could also be a fault in the power steering system. It is recommended to contact the local 4S dealership for inspection and repair.
17
1
Share

What are the reasons for the Chery Fengyun 2 stalling after starting?

Introduction to the reasons for Chery Fengyun 2 stalling after starting: Severe carbon buildup in the car engine: If the car engine has severe carbon buildup and the fuel cannot burn effectively in the cylinders, the vehicle may stall after starting. In this case, the carbon buildup in the engine should be cleaned promptly. Triggering the car's anti-theft system: If the car's anti-theft system is triggered, the engine may start but cannot operate normally, causing the vehicle to stall automatically after starting. This situation is common after replacing the car key or battery, so it is essential to recode the key after such changes. Ignition switch failure: If the car's ignition switch fails, the vehicle may stall automatically after starting, and the malfunction indicator light may turn on. This issue is more complex and requires inspection and repair by professionals at a car repair shop or 4S store. Low fuel system pressure: If the car's fuel system pressure is low, the fuel will not burn effectively, and the fuel system needs to be inspected.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.