What is the reason for the noise when lightly pressing the brake on the Tiggo 3?

1 Answers
VanSerenity
07/28/25 2:55pm
The reasons for the noise when lightly pressing the brake on the Tiggo 3 are: 1. Severe wear of the brake pads; 2. The material of the brake pads is relatively hard; 3. Improper installation of the brake system. The working principle of the brake is to convert the kinetic energy of the car into frictional heat energy for dissipation. Common braking devices for cars include drum brakes and disc brakes. The Tiggo 3 is a car under Chery, with a length, width, and height of 4420mm, 1760mm, and 1670mm respectively, and a wheelbase of 2510mm. The vehicle is equipped with front dual airbags, front side airbags, rear parking radar, ABS anti-lock braking system, EBD electronic brake-force distribution, and other configurations that balance active and passive safety.
Was this review help?
12
0
Share
More Forum Discussions

What to Do If Water Drips from the Chassis After Parking?

Water dripping from the car chassis can be due to two main reasons: air conditioning system drainage and water dripping from the muffler and exhaust pipe at the rear of the car. Below are the reasons for water dripping from the chassis: 1. Air conditioning system drainage occurs because in summer, the outdoor temperature is high while the interior temperature of the car with the air conditioning on is low, creating a temperature difference that causes water to drip from the chassis. 2. If the low-pressure pipes of the car's air conditioning system are not wrapped with thermal insulation foam, the surface of the pipes can easily condense moisture from the air, and water droplets will collect and drip from the lowest point of the pipes. 3. Water dripping from the muffler and exhaust pipe at the rear of the car is also a normal phenomenon, usually occurring mostly in winter. When gasoline is injected into the cylinder and mixed with air, it burns completely in the combustion chamber, producing mainly carbon dioxide and water. At high temperatures, water is discharged into the atmosphere in the form of water vapor. Since the muffler is located at the rear of the car where the temperature is relatively low, the water vapor condenses into liquid water when it cools.
16
2
Share

How to Replace the Battery in a Mercedes SLC Key?

The back of the key has a button. Press this button and slide the back cover of the key forward to open it. The battery is located in the slot next to it. Pay special attention to the battery model. Most Mercedes keys use a 3V CR2025 battery. After opening the slot, remove the old battery and replace it with a new one. Here is more information about Mercedes keys: 1. Mercedes' three generations of car keys over the past twenty years. The key design is not related to the vehicle model or series. Within the same era, whether it's a C-Class, E-Class, or S-Class, their keys are basically the same, and the battery replacement methods are also similar. 2. For Mercedes keys from 2006 to 2013, first flip open the tab at the rear end of the key to remove the mechanical key. Insert the mechanical key into the slot at the tab position and apply slight force to pop open the back cover. Then remove the depleted old battery, replace it with a new one, and close the back cover.
2
1
Share

How to Check the Engine Oil Level in a Land Rover Range Rover?

To check the engine oil level in a Land Rover Range Rover, follow these steps: 1. First, pull out the oil dipstick from the engine compartment. 2. Wipe it clean and reinsert it into the oil filler hole. 3. Pull out the dipstick again and observe the oil level marked on it. Additional information: 1. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication, reducing friction, aiding in cooling, sealing against leaks, preventing rust and corrosion, and cushioning impacts. 2. Engine oil consists of base oil and additives. The base oil is the primary component of the lubricant, determining its fundamental properties, while additives help compensate for and enhance the performance of the base oil, providing additional beneficial characteristics, making them an essential part of the lubricant.
7
0
Share

What are the solutions for heavy steering in older Nissan Qashqai models?

Reasons and solutions for heavy steering in older Nissan Qashqai models: 1. Power steering pump failure: When the pump pressure of the power steering pump fails to meet the standard value, the steering wheel may feel heavy during use. It is necessary to check the flow control valve. If the flow control valve or safety valve leaks during driving, it can be repaired by grinding, and then check whether the spring of the safety valve has failed. Solution: Replace the power steering pump. 2. Steering gear failure: When the hydraulic pressure of the steering gear is low, the steering may feel heavy. If the heavy steering is caused by the oil pressure of the steering gear. Solution: It is recommended to seek professional repair at a specialized manufacturer, and it is not advisable for the owner to handle it themselves. 3. Lack of oil or air in the power steering system: When there is air in the car's steering system, not only will the steering feel heavy, but there will also be noise during steering. Solution: Immediate action is required to avoid greater damage; it is necessary to bleed the air or add oil. 4. Clogged return oil filter in the oil reservoir: If the return oil filter in the oil reservoir is not maintained or replaced for a long time, it can easily become clogged, leading to poor circulation of the power steering oil and heavy steering. Solution: Replace the filter.
15
5
Share

How Long Does a 4-Wheel Alignment Take?

Getting a four-wheel alignment generally takes about an hour to complete. Here are the situations when a four-wheel alignment is needed: 1. The vehicle's driving performance is affected (the most direct feeling for the driver is the car pulling to one side, or the steering wheel not returning to center automatically). 2. Damage to the chassis and suspension caused by an accident. 3. Abnormal tire wear. It is also necessary to consider whether abnormal wear is caused by incorrect tire pressure. Generally, over-inflation will accelerate wear in the center of the tread, while under-inflation will accelerate wear on both sides of the tread. If there is uneven wear on one side, it could be due to a deviation in the camber angle. 4. The axle or suspension components have been removed.
18
2
Share

What is the principle of Toyota hybrid?

Toyota's hybrid principle is that the electric motor directly drives the wheels. Its hybrid system is divided into series hybrid system, parallel hybrid system, and series-parallel hybrid system. Relevant information is as follows: 1. The Toyota Avalon is a mid-size car with a body size of 4975mm in length, 1850mm in width, and 1450mm in height, a wheelbase of 2870mm, a fuel tank capacity of 60L, and a curb weight of 1595kg. 2. The Toyota Avalon has a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.5L naturally aspirated engine with a maximum horsepower of 209ps, a maximum power of 154kw, and a maximum torque of 250nm, paired with an 8-speed automatic transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.