What is the reason for the Nissan Sunny dashboard not displaying the gear position?

1 Answers
SanIsabella
07/29/25 9:00pm
The reason why the Nissan Sunny dashboard does not display the gear position is that there is a problem with the transmission gear position switch, or the plug behind the instrument panel may not be properly connected. Gear shifting operation: Depress the clutch pedal—quickly release the accelerator—shift to the corresponding gear—match the accelerator according to the gear, or do not press the accelerator, quickly lift the clutch pedal to the semi-engaged state—gently release the clutch pedal after the clutch is engaged. Gear shifting gesture: When shifting gears, keep the five fingers together, loosely grasp the gear lever ball, and use the forearm to drive the hand to shift gears. Pay attention to the force when shifting gears should be gentle and slow, not too strong, so as not to shift to other gears. The shifting must pause in neutral. If the wrong gear is engaged, don't panic, you can return to the original gear and shift again.
Was this review help?
14
2
Share
More Forum Discussions

Is It Serious If a Car Engine Has Air Leakage?

It is still possible to drive a car with an engine air leak. However, if the intake pipe leaks, it may suck in dust, sand, or other debris from the outside, leading to increased wear on the cylinder walls or piston rings. An engine air leak can cause abnormal idling and signal irregularities. Any air leakage in the engine will result in unstable operation and insufficient power under various working conditions. Methods for checking air leakage: 1. Visual Inspection: The observation method is the simplest and most intuitive way to detect issues. When the engine shows symptoms, make full use of observation to check if there are faults in the cylinders and spark plugs. If the spark plug electrodes have excessive carbon deposits and are wet with engine oil, it indicates poor piston ring sealing causing oil leakage. 2. Repeated Testing: Infer the location of the fault by testing and observing different outcomes. Check the pressure in the cylinders to understand the cause of the problem based on pressure changes. For example, use a pressure gauge to measure the pressure. If the pressure rises significantly, it indicates piston ring wear. If the pressure remains unchanged, it suggests air leakage from the valves or cylinder gasket. 3. Experience Comparison: This method is more suitable for experienced car owners who can roughly deduce the cause after comparing throttle responses.
2
0
Share

Is it allowed to drive shirtless in a car?

There is no explicit legal prohibition against driving shirtless. The act of driving without a shirt does not conform to civilized driving norms. Traffic authorities generally do not penalize such behavior but may issue a warning or provide educational guidance. According to Article 62 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," the following acts are prohibited while driving a motor vehicle: (1) Driving when the doors or compartments are not properly closed; (2) Hanging or placing items within the front or rear windows of the vehicle that obstruct the driver's view; (3) Making or answering handheld phone calls, watching TV, or engaging in other activities that hinder safe driving; (4) Turning off the engine or coasting in neutral when going downhill; (5) Throwing items onto the road; (6) Driving a motorcycle with hands off the handlebars or hanging items on the handlebars; (7) Driving continuously for more than 4 hours without stopping to rest or resting for less than 20 minutes; (8) Honking the horn in areas or sections where honking is prohibited.
2
5
Share

Can I call 112 for vehicle removal?

You cannot call 112 for vehicle removal. You can dial 122 instead. 122 is a department established by China's public security traffic management authorities to handle public traffic accident reports, dispatch police officers to deal with various alerts and assistance requests, and also accept public reports, complaints, and inquiries regarding traffic management and traffic police law enforcement. In such cases, the traffic police can be utilized to address situations where someone intentionally refuses to move their vehicle. Alternatively, you can use Alipay's "One-Click Vehicle Removal" feature. Open Alipay, find "City Services," click on "One-Click Vehicle Removal," enter the license plate number and location, and submit. The other vehicle owner will then receive a call notification from the "Traffic Management 12123" system. You can also call 114. 114 cannot directly provide the owner's phone number, but by providing the license plate number and location of the vehicle that needs to be moved to the operator, your call will be directly transferred to the other owner's mobile phone without revealing their number. After dialing 114, provide the license plate number, and 114 will transfer the call to the owner. To better protect the owner's privacy, the owner's phone number is only transferred, not disclosed. However, there is a prerequisite: the owner must apply to China Unicom to bind their mobile phone number to their license plate number and activate this service.
13
5
Share

When reversing into a parking space, if the left side is wider, which way should I turn the steering wheel?

When reversing into a parking space, if you see from the rearview mirror that the left side is wider, turn the steering wheel to the left to adjust the distance between both sides to be roughly equal. If the right side is wider, turn the steering wheel to the right until the distances on both sides are similar. The principle of turning the steering wheel towards the wider side when reversing means: 1. Taking left-side reversing as an example, if you notice that the distance between the car and the left edge of the parking space is too large, turn the steering wheel to the left. If the distance between the car and the left edge is too narrow, immediately turn the steering wheel to the right to correct the position and ensure the car enters the space properly. 2. For right-side reversing, observe the right rearview mirror to monitor the distance between the car body and the right edge of the parking space while reversing. If the distance between the car and the left edge is too large, turn the steering wheel to the left; if the distance between the car and the left edge is too narrow, immediately turn the steering wheel to the right. 3. Again, taking left-side reversing as an example, during the reversing process, the car body will form an angle with the parking space. Observe the left rearview mirror to check the width and distance between the car body and the edge of the parking space.
19
0
Share

How often should the fuel filter of Audi Q5 be replaced

Audi Q5 fuel filter should be replaced after driving 40,000KM or 42 months, whichever comes first. If not replaced in time, it will not be able to filter impurities and other functions. Over time, it will cause insufficient fuel supply and insufficient power of the car engine. If the filter is found to be very dirty before reaching the above mileage, it also needs to be replaced. It should be noted that when replacing the fuel filter, the car's engine oil, oil filter, and air filter should also be replaced. After installation, it is necessary to develop the habit of checking the sealing of the interface to avoid oil leakage. The fuel filter is referred to as the fuel filter. There are carburetor type and electronic injection type fuel filters. For gasoline engines using carburetors, the fuel filter is located on the inlet side of the fuel pump, with low working pressure, and generally uses a nylon shell. For electronic injection engines, the fuel filter is located on the outlet side of the fuel pump, with high working pressure, and usually uses a metal shell. The filter element of the fuel filter mostly uses filter paper, and some use nylon cloth or polymer materials. The main function of the fuel filter is to filter impurities in gasoline. If the fuel filter is too dirty or blocked. In-line filter paper fuel filter: Inside this type of fuel filter, folded filter paper is connected to both ends of the plastic or metal filter. After the dirty oil enters, it passes through layers of filter paper from the outer wall of the filter to the center, and clean fuel flows out.
17
0
Share

How Often Should a New Car Be Started If Not Driven?

A new car generally needs to be started once a week to ensure the proper functioning of various fluids in the engine and the car battery. If a car is left unused for an extended period, it can negatively impact various components and performance. 1. Check if the battery is depleted A car battery discharges automatically, and if the vehicle remains idle for a long time, the battery may lose charge. Additionally, some electrical components in the car continue to consume battery power even when the vehicle is off, leading to battery depletion. Before driving, always check the battery charge to avoid being unable to start the car due to a dead battery. Tip: If the car is not driven for an extended period, it's best to start it once a week to recharge the battery. 2. Check if the tires are underinflated or if the rims are deformed After prolonged parking, inspect the tires for any air leaks before driving again. If the tire pressure is low, inflate them promptly. Additionally, prolonged parking can cause deformation in the tires and rims on the side bearing concentrated weight, leading to body vibrations, tire blowouts, or other issues while driving. Therefore, always check the tires and rims before driving. 3. Inspect the fuel tank level Whether restarting the car after prolonged parking or during daily use, always check the fuel tank level before driving to avoid running out of fuel mid-journey. Additionally, drivers should inspect all vehicle fluids, including engine oil, brake fluid, and coolant, as they have a 'shelf life.' Expired fluids may pose safety risks.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.