What is the reason for the Mitsubishi Lancer EX clutch not responding?

1 Answers
StFaith
07/30/25 3:44am
Mitsubishi Lancer EX clutch not responding is due to aging hydraulic oil and rust on the clutch. The following is an introduction to the clutch-related content: Clutch: The clutch is located in the flywheel housing between the engine and the transmission, with the clutch assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch is the input shaft of the transmission. Function: The function of the clutch is to gradually engage the engine with the transmission, ensuring a smooth start of the car, temporarily cutting off the connection between the engine and the transmission to facilitate gear shifting and reduce the impact during shifting. It also serves to separate in case of emergency braking, preventing overload of the transmission and other drive systems, thereby providing certain protective functions.
Was this review help?
15
3
Share
More Forum Discussions

What's the reason for the engine not starting?

The engine may fail to start for many reasons. Possible causes include an empty fuel tank, a faulty fuel pump, incorrect timing, malfunctioning crankshaft or camshaft position sensors, issues with the anti-theft system, or starter motor failure. It is recommended to have it inspected and repaired at a 4S shop. Below are methods for diagnosing engine abnormalities: 1. Check the battery: Under normal engine conditions, faults in the starter or battery can make the engine difficult to start. In such cases, first assess the condition of the starter and battery to roughly identify the faulty component. It's essential to determine whether the engine's failure to start is due to insufficient battery charge. 2. Inspect the starting system: When the engine fails to start, the first step is to examine the electrical circuits of the engine's starting system. The starting system's circuits typically include the battery, starter motor, and connecting cables. Additionally, the ignition switch, starter relay or solenoid, and the vehicle's anti-theft system are also crucial components of the starting system. 3. Diagnose the fuel system: The diagnosis of the fuel system can be divided into two parts: the fuel supply system and the fuel injector circuit system. The fuel supply system can be checked by measuring fuel flow and pressure. The best method for measuring fuel flow is to test the fuel supply line under load.
2
3
Share

What to Do If You Can't Learn and Don't Want to Continue Subject 2?

If you can't learn and don't want to continue Subject 2, you can negotiate a refund with the driving school, but your Subject 1 results will be invalidated. Here are specific tips for Subject 2 of the driving test: 1. Slow speed: Keeping the speed slow is the fundamental rule for practicing Subject 2. Without stalling, try to drive as slowly as possible—the slower, the better. A slow speed allows enough time to adjust each operation. 2. Adjust mirrors: After getting in the car, always adjust the mirrors properly, which is especially important for reversing into a garage and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, you must find the points accurately and observe carefully to ensure precision. 4. Pay attention to the car's four corners: The front corner when reversing into a garage can easily brush the outer line, while the rear corner can brush the side lines of the garage; the front corner in curve driving can easily go out of line; the front corner in a right-angle turn can easily go out of line; the front corner in parallel parking can brush the outer line or the left front corner of the garage, while the right rear corner can brush the right garage line. Therefore, always be mindful of the four corners and the outer lines.
4
2
Share

Can the ETC card be removed at will?

The ETC card can be removed, but the ETC device will not function without it. According to the "Rules for the Use of the Non-Stop Rapid Transit System," the ETC card must be inserted into the OBU device to operate normally; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When the ETC card is inserted into the OBU device, a prompt sound will indicate that the device is activated. Without the card, the device remains in a dormant state and cannot recognize vehicle information at toll stations, so removing the card disables ETC functionality. ETC is an electronic toll collection system, also known as an automatic road toll system. It is specifically designed for toll roads, commonly found on highways, toll bridges or tunnels, and certain urban road sections to alleviate traffic congestion. ETC Deduction Principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's windshield-mounted electronic tag and the microwave antenna in the ETC lane, the system connects with banking networks for backend settlement, allowing vehicles to pass toll stations without stopping. This operates on a "pass first, deduct later" principle. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Reduces noise and exhaust emissions by eliminating stops at toll booths; Reduced wear and tear: Saves costs by minimizing frequent starts and stops, lowering vehicle wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase traffic flow by 2-3 times, making traditional ETC faster and more high-tech. Compared to license plate payment, ETC is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Integrated Transportation System" explicitly states the goal of "achieving interoperability of transportation smart cards in key urban clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC." It also sets a target of "50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: Beyond improving ETC installation convenience and passenger vehicle usage rates, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments, providing comprehensive travel services for car owners. This means more application scenarios will support ETC usage.
18
0
Share

Does Using the Car Air Conditioner's Heating Function Consume More Fuel?

Using the car air conditioner's heating function does not significantly increase fuel consumption. When the air conditioner is cooling, the compressor needs to be activated, which consumes fuel. However, heating is achieved by utilizing the heat generated by the engine. Apart from the minimal fuel required to power the fan that circulates the warm air, no additional fuel-consuming devices are engaged, so it does not lead to extra fuel consumption. Below is an introduction to car air conditioning: 1. The air conditioner's compressor has a high power demand, requiring direct energy supply from the generator, which is driven by the engine, thus adding to fuel consumption. 2. During winter, it is recommended to keep the windows closed and only use the fan to transfer heat from the engine compartment into the cabin, as using the air conditioner would be wasteful. There is no need to press the air conditioner button in winter; simply turning on the heating is sufficient, as the heat comes from the engine and does not consume extra fuel. Use the air conditioner's heating function when the car interior is too cold in winter, and the cooling function when it's too hot in summer. 3. For automatic air conditioning, pressing the AUTO button once will activate the system and set it to a reasonable temperature, typically 25 degrees Celsius, which is calculated by the computer based on the temperature difference inside and outside the car. The temperature can also be adjusted manually using the temperature control knob. When the air conditioner is on, the AC button's light will be illuminated. To turn off the air conditioner, press the AC button until the light goes off.
13
5
Share

When Should You Change Your Car's Engine Oil?

There are several methods to determine when to change your car's engine oil: 1. Observe with an oil test paper: Take a small amount of oil from the dipstick and drip it onto the oil test paper, then let it sit overnight, waiting for the oil to fully spread on the paper. The sharper the edges between the oil ring, sediment ring, and diffusion ring, the more the oil performance has degraded. 2. Judge based on driving feel after an oil change: Engine oil has a 'shelf life.' If you feel the power is 'sluggish' or acceleration is slower during a certain period, it's time to change the oil. 3. Smell test: Pull out the dipstick and smell it closely. If there is a strong sour odor, the oil has deteriorated and should be changed. 4. Hand rubbing method: Rub the old oil between your thumb and index finger repeatedly. Good-quality oil will feel lubricated, with few grindings and no friction. If you feel impurities, poor viscosity, or even a rough sensation, it's time to change the oil. 5. Color identification method: Take a clean white filter paper and drip a few drops of old oil on it. After the oil seeps through, good-quality oil will have no powder, feel dry and smooth to the touch, and have a clear yellow infiltration zone. If it appears dark brown with impurities, it should be changed. 6. Light inspection method: Pull out the dipstick and hold it at a 45-degree angle under light to observe the oil droplets. If you can clearly see no grinding particles in the droplets, the oil is good. If there are many grinding particles, it's time to change the oil.
14
3
Share

What brand of tires does Chery use?

Chery's original tires are from the Giti brand. Chery A3 matching tires: 205/55R16, but there is more than one matching tire, including GitiComfort228, Goodyear Eagle NCT5, and Maxxis MA-530. Tires are one of the most important components of a car, with the following main functions: Supporting the vehicle's weight, bearing the car's load, and transmitting forces and moments in other directions; transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby improving the car's power, braking, and passability; working together with the car's suspension to cushion impacts during driving and dampen the resulting vibrations.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.