What is the reason for the middle row seats in the v260 not having power?

1 Answers
LeBraxton
07/29/25 9:52pm
v260 middle row seats not having power is due to a disconnected plug or a blown fuse. Below is relevant information about car seats: 1. Seat adjustment methods: Although height adjustment for car seats is not a mandatory feature, most cars on the market currently come equipped with it. Car seats must meet two major requirements: ease of adjustment and comfort. This means that drivers can adjust the seat to the optimal position through controls to obtain the best visibility, facilitate the operation of the steering wheel, pedals, gear stick, etc., and achieve the most comfortable and habitual sitting angle. 2. Precautions: The height of the headrest should be level with the upper edge of the ear. The headrest height should be adjusted to be parallel with the head, with the soft middle part of the headrest aligned with the upper edge of the ear. This way, when the vehicle is subjected to severe impact, the protective role of the headrest for the head and neck can be maximized.
Was this review help?
16
4
Share
More Forum Discussions

How to Open the Trunk of a BMW i8?

Methods to open the trunk of a BMW i8: Press and hold the trunk release button on the remote key to open the trunk, or press the trunk switch on the A-pillar inside the car. As long as the trunk is not locked, it can be opened when the car is parked. The BMW i8 is a sports car, so the trunk space is very limited. The BMW i8 is equipped with a high-performance hybrid system, highlighting the vehicle's exceptional power performance. The plug-in hybrid system consists of two electric motors and a turbocharged gasoline engine, with a maximum output of 345 kW and a peak torque of 800 Nm. The 1.5-liter three-cylinder gasoline engine features direct fuel injection and variable intake turbocharging technology, delivering power to the rear wheels.
4
1
Share

Should I Use Cold or Hot Air to Defog the Car?

Both cold and hot air can be used to defog the car, but cold air works faster, though it may cause fogging to reappear. Hot air removes fog more slowly, but there's no need to worry about secondary fogging. The rear windshield defogging relies on heating wires, while the front windshield cannot be equipped with heating wires, so the car's air conditioning is used to defog it. Hot air defogging requires the driver to start in advance because turning on the hot air will initially make the fog denser, affecting driving visibility. Generally, drivers should turn on the hot air defogging a few minutes before starting the car.
1
5
Share

Is ETC Solar-Powered?

For solar-powered ETC devices, you can park your vehicle in the sun for several hours to charge the device. For ETC devices without solar charging panels, you can plug in a dedicated power cable and charge them using the cigarette lighter socket. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display messages such as 'Tag Invalid' or 'Please Insert Card,' indicating that the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation location. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and stops, reducing wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
18
5
Share

How often should the spark plugs be replaced on the Tiguan?

The spark plugs on the Tiguan should be replaced every 35,000 kilometers or every 48 months. Spark plugs, commonly known as "fire nozzles," function by discharging the high-voltage pulses sent through the ignition wires, creating an electric spark that ignites the air-fuel mixture in the cylinder by breaking down the air between the two electrodes. Due to the varying operational characteristics of different engines, no single standard spark plug can suit all engines. Therefore, it is essential to select spark plugs that match the specific engine's requirements. The Tiguan's body dimensions are 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. It delivers a maximum power output of 147kW and a peak torque of 280Nm.
7
4
Share

How to Start the Atenza When the Key Fob Battery Dies?

Atenza's method to start when the key fob battery dies: 1. Press the button on the side of the remote key to pop out the mechanical key, then use the mechanical key to open the car door; 2. After entering the car, place the remote key near the start button. The induction coil inside the key can connect to the vehicle's computer, allowing you to ignite and start the car. The Atenza's body dimensions are 4870mm in length, 1840mm in width, and 1450mm in height, with a wheelbase of 2830mm. In terms of appearance, it adopts Mazda's new Kodo design language, featuring a U-shaped front face and LED headlights. The new model's headlight assembly includes LED daytime running lights.
6
4
Share

What are the effects of turning off the engine without shifting to P gear?

Turning off the engine without shifting to P gear can damage the transmission and engine. It is recommended to shift to P gear before parking and turning off the engine. The following are specific details about P gear: 1. Principle: Mechanically locks the output shaft of the transmission to secure the vehicle and prevent it from moving. 2. Vehicle parking sequence: After the car has come to a complete stop on a flat road, shift the gear from D gear to P gear, then engage the handbrake to complete parking, and finally turn off the engine. 3. Safe parking: If you brake directly without shifting to P gear, the vehicle may lose its necessary braking ability. The safest and most secure practice is to shift to P gear after the vehicle has come to a complete stop.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.