What is the reason for the Mercedes-Benz A not retracting the side mirrors after locking the door?

3 Answers
VanJuliana
07/29/25 9:18am
Mercedes-Benz side mirrors not automatically folding could be due to the battery being disconnected, having no power, or not setting the 'fold mirrors when locking' feature. Location of car side mirrors: Car side mirrors are located on the left and right sides of the front of the car, as well as inside the car's front. Car side mirrors reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly. They act as a 'second pair of eyes,' expanding the driver's field of vision. Types of side mirrors: Generally, there are two main types of side mirror surfaces. One is a flat mirror, similar to a typical household mirror, which provides an image the same size as seen by the naked eye. This type of flat mirror is commonly used as an interior rearview mirror. The other is a convex mirror, which provides a smaller image than seen by the naked eye but offers a wider field of view. This type of convex mirror is commonly used as an exterior side mirror and a lower side mirror.
Was this review help?
16
2
Share
Evangeline
08/12/25 9:21am
I've had a Mercedes-Benz A-Class for two years and often encountered the issue of the mirrors not folding after locking the car. Actually, it's quite simple—most of the time, it's just a setting that's not configured correctly. Check the vehicle settings menu on the central display screen in your car to see if the automatic mirror folding function is enabled. Sometimes, accidentally pressing a button or a system restart can turn it off. If the setting is on but the mirrors still don't fold, it might be a blown fuse—older cars are prone to fuse failures. The fuse box is located under the driver's seat; refer to the manual for the F20 fuse and try replacing it. Another possibility is that the mirror motor gears are stuck or worn out—gently push the mirror to see if it moves. I've dealt with this issue in my car—it's a minor problem that can be fixed easily, so don't let it escalate and affect parking safety. Make it a habit to glance at the mirrors before locking the car to ensure they've folded.
Was this review help?
20
3
Share
Expand All
McElaina
10/06/25 4:58am
I think the main issue with the Mercedes-Benz A's mirrors not retracting lies in the electronic control system. The mirrors are driven by motors, with signals coming from the door lock module. If they don't retract when locking, first check if the automatic function is enabled in the settings. Then inspect the fuse, usually F34 in the fuse box—replace it if blown. Motor failure is rare but possible due to rusty gears; try manually retracting them with the button. Short circuits or loose connectors are common; I once fixed a friend's car by cleaning an oxidized plug. Occasionally, a software bug in the control module might occur—disconnecting the battery's negative terminal to reset could help. For severe cases, seek professional diagnosis for coding issues to avoid causing short circuits or damaging the car.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What happens if too much refrigeration oil is added?

Adding too much refrigeration oil can have the following consequences: 1. Hindering heat exchange: When the amount of refrigeration oil is excessive and cannot be carried back to the compressor by the refrigerant vapor, the excess oil will adhere to the evaporator and related pipe walls, forming a thermal resistance that hinders heat exchange. 2. Reducing refrigerant circulation: Excessive refrigeration oil can accumulate at the lowest pipeline points, increasing the flow resistance of the refrigerant and reducing its circulation volume. 3. Decreased cooling capacity: Too much refrigeration oil in the cylinder can reduce the volumetric efficiency of the compression chamber (the excess oil occupies the volume meant for refrigerant vapor, decreasing the refrigerant circulation volume). This reduction in circulation volume significantly lowers the air conditioning cooling capacity, which is the primary factor affecting the performance of the air conditioning system due to refrigeration oil.
1
0
Share

What is the fuel tank capacity of the BYD Qin Plus-DMI in liters?

The fuel tank capacity of the Qin PLUS 2019 1.5L Manual Luxury model is 50L. The vehicle is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission (MT). The drivetrain configuration is front-engine, front-wheel drive. The front suspension features a MacPherson independent suspension, while the rear suspension utilizes a torsion beam non-independent suspension. Among vehicles in the same class, the Qin 2019 1.5L Manual Comfort model also has a 50L fuel tank capacity, as does the BYD F3 2020 1.5L Manual Classic model. During actual refueling, the amount of fuel may exceed the calibrated capacity. This occurs because automakers specify the fuel tank capacity from the tank bottom to the safe fill level, leaving additional space between the safe fill level and the tank opening. This safety margin accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity will exceed the nominal tank capacity. To check remaining fuel levels, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel, while nearing F signifies sufficient fuel levels.
13
2
Share

What are the four tail lights of a car?

The introduction to the four tail lights of a car is as follows: 1. Car tail lights include: turn signals, brake lights, position lights, rear fog lights, reverse lights, and parking lights. 2. Rear fog lights and reverse lights: the left is the fog light, the right is the reverse light, meaning single fog light and single reverse light. Turn signals and brake lights are symmetrical, with one on each side. 3. Considering the wavelength penetration of light, there are generally three colors: if better illumination is needed, white lights are used, such as reverse lights and license plate-related lights. Turn signals use more eye-catching yellow or red colors, serving as attention-grabbing and warning lights, such as brake lights, high-mounted brake lights, night lights, and width indicator lights.
13
5
Share

What is the best engine oil for Toyota vehicles?

Here is an introduction to the engine oils used in Toyota vehicles: 1. Use oil as specified in the manual: According to the manual, use 0W-20. You can also use 5W-20 or 5W-30, either fully synthetic or semi-synthetic. The new RAV4 and Rongfang models require 0W-20 oil. 2. Engine oil for older Toyota models: Older RAV4 models with spare tires use 5W-30 or 0W-40 oil. (The numbers 20, 30, and 40 represent the oil viscosity.) The Rongfang requires lower viscosity, so 20 is sufficient. Here are four key factors to consider when choosing engine oil: 1. Based on engine condition: Choose engine oil according to the engine's requirements. There is no need to use overly advanced oil in engines with lower requirements, nor should you use lower-grade oil in engines with higher requirements. 2. Prefer multi-grade oil: It is advisable to choose multi-grade oil, as it is economical, long-lasting, and efficient, providing better protection for the engine. Due to the characteristics of multi-grade oil, it may appear darker or have lower oil pressure compared to conventional oil during use, which is normal. 3. Choose based on temperature: If the engine is in good condition and the seasonal temperature is low, use oil with lower viscosity to ensure smooth oil flow. In high-temperature seasons or if the engine is severely worn, higher viscosity oil helps form a protective film and reduces engine wear.
19
3
Share

Which country is Pirelli tires from?

UK-based Pirelli Tires was established in 2005. With its high-quality products and services, it sells over 3 million tires annually in more than 90 countries and regions including the EU, the US, Australia, Japan, and New Zealand. It has collaborated with Tyrepower and Totaltyre, the largest tire distributors in the UK, for over a decade, accumulating advanced international technology R&D and global market sales experience. In the UK market, it enjoys extremely high customer satisfaction and market share. Extended content, related introduction: 1. Introduction: It is an export tire made by the Naisi Group. It has its own sales channels in South America, the US, India, Spain, etc. The headquarters is located in Shanghai.
4
1
Share

Is it necessary to apply film to the front windshield of a sedan?

Applying film to the front windshield of a sedan depends on personal needs. Below are the pros and cons of applying film to the front windshield of a sedan: 1. Advantages of applying film to the front windshield of a sedan: 1. UV protection: This is essentially the biggest selling point of front windshield films. High-quality films can block up to 99% of UV rays, significantly reducing damage to the car's dashboard, center console, and various interior decorations, preventing aging of car instruments and fading of interior decor. 2. Anti-explosion: High-quality front windshield films generally have anti-explosion functions, preventing the windshield from shattering in emergencies, thereby avoiding secondary injuries to the driver and front-seat passengers. 3. Anti-glare: Front windshield films can effectively reduce the visual stimulation caused by harsh glare, alleviating eye fatigue from prolonged driving and improving driving safety. 2. Disadvantages of applying film to the front windshield of a sedan: 1. Reduced light transmittance: Traffic laws and regulations require that the light transmittance of vehicle glass should generally be above 70%. The front windshield itself has a light transmittance of about 75%, which means the film must have a light transmittance of over 90% to comply with traffic regulations. Otherwise, drivers may face penalties for violations. However, films with over 90% light transmittance are relatively rare in the market. 2. High cost: Currently, high-quality front windshield films from reputable brands are generally expensive, which often deters many drivers. 3. Poor-quality films obstruct vision: The front windshield films are the most expensive in the car market, leading to the emergence of manufacturers producing substandard films under the guise of international brands. Applying such films to the front windshield not only fails to provide the intended benefits but can also interfere with the driver's vision, increasing the risk of traffic accidents.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.