What is the reason for the Malibu's power steering requiring repair and failing to start?

What is Vehicle Wheelbase?

Automobile wheelbase is the distance between two vertical lines that pass through the midpoints of adjacent wheels on the same side of the vehicle and are perpendicular to the longitudinal symmetry plane of the vehicle. Simply put, it is the distance from the center of the front axle to the center of the rear axle. The wheelbase affects passenger space for the following reasons: 1. Front and rear axle length: Generally, passenger seats are arranged between the front and rear axles. Even if the wheelbase is extended by just a few dozen millimeters, the difference in feel can be significant, allowing for more seating postures and increased longitudinal space inside the vehicle, greatly enhancing riding comfort. 2. Longer wheelbase means more space, which is directly proportional: However, many manufacturers, to cater to domestic consumers' preference for 'bigger is better,' deliberately extend the wheelbase into the engine compartment. A longer front end makes the car appear more premium, but this practice offers minimal actual improvement to the usable space inside the cabin.

20

3

Share

How Many Times Can You Retake Motorcycle Subject 2 If You Fail?

You can retake Motorcycle Subject 2 up to 5 times if you fail. Here is some relevant information about Subject 2: Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. Subject 2 Test Items for Small Vehicles (C1/C2): Includes five mandatory test items: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as the S-curve). Some regions also include a sixth item: highway toll card collection. Subject 2 Test Items for Large Vehicles (A1/A2/A3/B1/B2): Includes pole test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, right-angle turns, passing through a narrow gate, passing through continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

4

1

Share

Will crossing double solid lines for a U-turn definitely be captured by cameras?

Crossing double solid lines for a U-turn will definitely be captured by cameras, usually within about 20 meters of crossing the lines. Illegal U-turns across double solid lines are recorded through automatic electronic police surveillance or manual photography by traffic police, with on-the-spot penalties for violators. Prohibited U-turn situations are as follows: U-turns are prohibited where there are "No U-turn" signs or "No Left Turn" signs: If there is a no U-turn sign, then U-turns are not allowed at that intersection. A U-turn is essentially an extension of a left turn, so if there is a no left turn sign at an intersection, U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are not allowed at crosswalks. At intersections where U-turns are permitted, you must cross the crosswalk before making the U-turn; you cannot make the U-turn while on the crosswalk. U-turns are prohibited when there is no left turn lane: Even in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited from the second left turn lane: When a vehicle is in the second left turn lane, it cannot make a U-turn. In the absence of any signs, U-turns are only permitted from the innermost left turn lane. U-turns are prohibited at yellow solid lines: U-turns are not allowed at yellow solid lines. Even if there is a U-turn permitted sign, you must wait for the green light and cross the stop line before making the U-turn. U-turns are prohibited on highways: Making a U-turn by crossing the central divider on a highway is illegal and will result in a fine and 12 demerit points. If you miss an exit on the highway, continue to the next exit instead of attempting an illegal U-turn.

2

1

Share

What to Do If You Accidentally Scratched Someone Else's Car?

If you accidentally scratched someone else's car, you should immediately call the traffic police to handle the situation and gather evidence as soon as possible. In case of an accident while driving, you can retrieve the dashcam footage immediately. If there is no dashcam, check if there are any surveillance cameras nearby. The first priority in an accident is to preserve evidence. If you scratch someone else's car, do not flee the scene. If the other party reports to the police and there is sufficient evidence to prove that it was indeed your fault, it can be determined as a hit-and-run. Scratching someone else's car can also be handled through the normal insurance procedure. The repair costs can be directly reimbursed by the insurance company. To smoothly proceed with the insurance claim, both drivers need to cooperate as much as possible, and both parties should be present during the damage assessment. Alternatively, you can choose to settle the matter privately if the damage is minor, such as a few scratches, and both parties are willing to resolve it privately and reach an agreement. It is best to have a third party present during private settlements, such as traffic police, 4S shop personnel, or insurance personnel, so that any issues arising after the repair can be witnessed by a third party.

18

1

Share

What Causes Car Windows to Fail to Open?

If your car windows fail to open, it may be due to window vibration noise. This could indicate several issues: loose screws in the window regulator, a stuck window regulator, or complete failure of all window regulators, resulting in loss of window functionality. Here are specific solutions: 1. Clean the window regulator track: Insert a chopstick wrapped in a towel into the window guide track. Adjust the number of towel layers based on the track width to ensure proper thickness. Move the towel-wrapped chopstick up and down forcefully to clean the track, periodically removing the towel to rinse off accumulated dirt until no more dirt comes off. 2. Perform initialization for each window: The general initialization method involves turning on the ignition, pulling and holding the switch to raise the window, continuing to hold for over 3 seconds after the window reaches the top, releasing the switch and immediately pressing and holding it to lower the window completely for over 3 seconds, then pulling and holding the switch again to raise the window for over 3 seconds after it reaches the top. Initialization is then complete, and the window should regain its original function. Note that initialization procedures may vary slightly between different car models. 3. 4S shop repair: If the above methods fail to resolve the issue, it is recommended to visit a 4S shop or professional auto repair center for inspection and repair.

5

0

Share

What is the standard tire pressure for sedans in summer?

In summer, the normal tire pressure for sedans is between 2.3 and 2.5. If the car is fully loaded with 5 passengers, it is more suitable to adjust the tire pressure to around 2.5; if there are generally only two passengers, a tire pressure of 2.3 is normal. Hazards of excessive tire pressure: The friction and adhesion of the tires will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates localized wear on the central tread pattern of the tire, shortening the tire's lifespan; Increased body vibration indirectly affects the lifespan of other components; Excessive stretching deformation of the tire cords can reduce the elasticity of the tire body, increasing the load on the car during driving; Reduced puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; It can make the steering wheel heavy and prone to deviation, creating unsafe driving conditions; Increased movement of various parts of the tire, causing abnormal heat due to excessive rolling; Reduced functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, causing damage to the bead area and abnormal wear; The friction between the tire and the ground increases exponentially, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to blowouts; Increased deformation of the tire body, making the sidewalls prone to cracks and generating flexing motion, leading to excessive heat, rubber aging, cord fatigue, and breakage, as well as increased tire contact area, accelerating shoulder wear.

17

0

Share

What is the reason for the Malibu's power steering requiring repair and failing to start?

What is Vehicle Wheelbase?

How Many Times Can You Retake Motorcycle Subject 2 If You Fail?

Will crossing double solid lines for a U-turn definitely be captured by cameras?

What to Do If You Accidentally Scratched Someone Else's Car?

What Causes Car Windows to Fail to Open?

What is the standard tire pressure for sedans in summer?

What is the weight of the 2021 Audi A6L?

How to Clean Poplar Cotton in the Car Radiator?

Is it advisable to buy a mortgaged car that cannot be transferred?

Can You Pass Subject 3 by Following the System Arrangement?