What is the reason for the malfunction of the Highlander's electric tailgate?

1 Answers
MilaAnn
07/30/25 7:04am
The reason for the malfunction of the Highlander's electric tailgate is: issues with the control box, signal wire, or sensor. The electric tailgate can be electronically controlled to open and close. There is a door close button inside the tailgate, and by pressing this button, the tailgate can close automatically without manual intervention. Here is some related information about the Highlander: 1. Body dimensions: The Highlander's body dimensions are 4890mm in length, 1925mm in width, and 1720mm in height, with a wheelbase of 2790mm, a fuel tank capacity of 72.5 liters, and a curb weight of 1910kg. 2. Powertrain: The Highlander is equipped with a 2.0T turbocharged engine, with a maximum power of 162kW and a maximum torque of 350Nm, paired with a 6-speed automatic transmission.
Was this review help?
20
2
Share
More Forum Discussions

How to Reset the Tire Pressure Monitoring on Baojun 510?

The tire pressure monitoring system is a type of active safety equipment that promptly alerts the driver when there are signs of danger in the tires, prompting them to take appropriate measures to avoid serious traffic accidents. The specific steps to reset the tire pressure monitoring on Baojun 510 are as follows: 1. Depress the brake pedal of the Baojun 510. 2. Press the one-touch start button of the Baojun 510. 3. The instrument panel will light up, and the vehicle's power will be activated. 4. Inflate all four tires of the car to the standard pressure. 5. Press the tire pressure reset button located below the cigarette lighter for 3 seconds to turn off the tire pressure warning light.
13
0
Share

Has the Camry Mud Splash Issue Been Resolved?

Not completely resolved. Here is a detailed introduction to the Camry mud splash incident: Since March 2018, many Camry owners have reported that after driving 2,000 to 3,000 kilometers, a large amount of muddy water enters the engine compartment due to poor sealing. This affects both aesthetics and the electrical system. Here is a specific introduction to how mud enters the engine compartment: Observations reveal that the 2018 Camry lacks a section of steel plate above the front wheel liners, resulting in poor sealing and allowing muddy water to splash into the engine compartment during driving.
10
3
Share

How to Change Transmission Fluid Using a Flushing Machine?

The method for changing transmission fluid using a flushing machine is as follows: 1. Remove the protective plate and loosen the drain plug; 2. Drain the used fluid through the drain plug hole and by removing the oil pan; 3. Expose the automatic transmission and remove the oil pan; 4. Clean the oil pan with a degreaser; 5. Reinstall the oil pan and fill with new transmission fluid; 6. Open the drain and fill plug holes of the automatic transmission, then insert both the fill and drain hoses of the flushing machine into the transmission; 7. Start the flushing machine; 8. Start the vehicle and shift through all gears; 9. When the fluid in the inspection window turns clear red, the transmission fluid change is complete.
20
1
Share

Will stepping hard on the accelerator when the car is skidding on snow damage the vehicle?

Stepping hard on the accelerator when the car is skidding on snow can cause damage to the vehicle. Increased engine wear: Stepping hard on the accelerator forces the engine to operate under high-intensity conditions, leading to more severe wear between internal components, which can shorten the engine's lifespan. Additionally, stepping hard on the accelerator increases engine power, thereby raising oil consumption. Insufficient oil levels can compromise the engine's lubrication and protection. Tire wear: High-speed friction between the tires and the ground can cause the tires to become "bald," leading to tire wear. Moreover, when driving at high speeds, sudden braking can cause the vehicle to skid or drift, which also affects driving safety.
17
3
Share

Can You Continue Driving with a Nail in the Tire?

Driving with a nail in the tire is not recommended. The maintenance methods for tires include: 1. Regularly clean stones from the tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Periodically inspect front wheel alignment; 6. Be mindful of driving habits, choose smooth roads, and avoid objects that can puncture or scratch the tires, as well as chemical spills that may corrode them. The functions of tires are: 1. Transmit driving force, braking force, and steering force to enable vehicle operation; 2. Support vehicle load; 3. Reduce and absorb vibrations and impacts during driving to prevent severe vibrations from damaging vehicle components.
18
5
Share

Which generation is the 15c4e car engine?

15c4e car engine is the first generation. Below are the relevant details about the 15c4e engine: Power: This engine is a 1.5-liter turbocharged four-cylinder engine. The maximum power of this engine is 133kw, and the maximum torque is 285 Nm. The maximum power speed of this engine is 5600 rpm, and the maximum torque speed ranges from 1500 to 4000 rpm. Direct injection technology: This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. Using an aluminum alloy cylinder head and block can reduce the weight of the engine, thereby improving the fuel efficiency and handling of the car. Transmission: This engine is paired with a 6-speed manual transmission or a 7-speed dual-clutch transmission. The dual-clutch transmission can enhance the car's shifting speed and transmission efficiency.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.