···
Log in / Register

What is the reason for the low brake in Baojun 730?

4 Answers
SanArthur
07/29/25 3:06pm

The reasons for the low brake in Baojun 730 are: 1. Improper operation by the driver while driving, leading to low brake performance; 2. Improper maintenance during car servicing, which damages the braking system, resulting in low brake performance while driving. Taking the 2019 Baojun 730 as an example, its body dimensions are 4780mm in length, 1820mm in width, and 1755mm in height, with a wheelbase of 2750mm. The 2019 Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 150kW and a maximum torque of 360Nm, paired with a 6-speed wet dual-clutch transmission.

Was this review help?
8
2
Share
ElisaLee
08/13/25 7:46am

I've been driving for almost ten years, and I often encounter low brake pedal issues with my Baojun 730. The brake pedal feels soft when pressed, with a longer travel distance, making the car less responsive than when it was new. This is mostly due to insufficient brake fluid—low fluid level in the reservoir affects pressure transmission—or air trapped in the brake system that hasn't been fully bled, causing air resistance. Additionally, if the brake pads are worn thin, the pedal will also feel low, especially during frequent hard braking. Once, I experienced early signs of brake failure on the highway because I didn't replace the pads in time. I recommend checking the fluid reservoir regularly—top up with dedicated brake fluid if the level is low. Don’t underestimate this issue; as the car ages, parts wear out. Schedule regular visits to the repair shop for brake bleeding or checking pad thickness to avoid emergencies while driving. Safety comes first, so address problems as soon as possible.

Was this review help?
8
1
Share
Expand All
McCole
10/11/25 6:33am

As someone who frequently repairs cars, I've seen many cases of low brake pedal issues with the Baojun 730. Common causes include brake fluid leaks or insufficient fluid level - when the level is low, pedal pressure decreases, making it feel soft. Another reason could be air remaining in the brake system, which requires professional bleeding (DIY attempts often lead to mistakes). Severely worn brake pads are also a factor - when they get too thin, the gap increases, requiring longer pedal travel. Additionally, minor leaks in the brake master cylinder or pipes (such as from aged seals) can cause fluid loss. I recommend first checking the fluid reservoir - if the level is too low, top it up. If that doesn't help, visit a shop for system bleeding or component replacement. Regular maintenance should include brake system checks and pressure gauge tests to prevent major issues. Don't delay repairs - emergency brake failure while driving can be extremely dangerous.

Was this review help?
19
1
Share
Expand All
OStella
11/24/25 7:40am

My Baojun 730's brakes are always too low, which is really annoying when driving. The pedal feels spongy, and I have to press it really deep to get any braking. It might be due to insufficient brake fluid or air in the system. I've had similar issues fixed before, and they said it was either worn brake pads or a leaking master cylinder. I need to get it checked out as soon as possible to avoid unstable driving. Safety is important—don't wait for an accident to happen.

Was this review help?
18
3
Share
Expand All
More Forum Discussions

How to Determine if a Car's Primer is Exposed?

To determine if a vehicle's primer is exposed, run your finger over the scratch. If you feel obvious unevenness or roughness, the primer is likely exposed. Types of primers include: 1. Dip primer; 2. Water-based dip primer; 3. Anodic electrophoretic primer; 4. Cathodic electrophoretic primer. Most passenger cars use cathodic electrophoretic primer, typically in white or gray. Precautions for car touch-up painting: 1. Avoid using water other than soft water, including hot water, alkaline water, or water with high hardness; 2. Do not rinse the car body with high-pressure water streams; 3. Avoid indiscriminate use of cleaning agents; 4. Do not wash the car under scorching sunlight.
1
5
Share

Is There Any Impact of Adding Two Bottles of Fuel Additive at Once?

Adding two bottles of fuel additive at once has no impact. However, excessive use of fuel additives can lead to increased carbon deposits in the combustion chamber and worsen vehicle exhaust emissions. Below are some precautions regarding fuel additive usage: Product Selection: When adding fuel additives, it is essential to choose legitimate products. Due to the chaotic market for fuel additives, the quality cannot be guaranteed. If inferior fuel additives are used, they may not only fail to remove carbon deposits but could also negatively affect the vehicle's normal performance. It is advisable to purchase from authorized stores or 4S dealerships. New Vehicles Should Avoid Fuel Additives: If the vehicle is newly purchased, it is not recommended to use fuel additives. New vehicles generally have good operating conditions and rarely suffer from severe carbon deposits. Typically, fuel additives should only be considered after the vehicle has been driven for more than 20,000 kilometers.
5
3
Share

What are the reasons for water ingress in the Passat Lingyu cabin floor mats?

Passat Lingyu cabin floor mats water ingress reasons are as follows: 1. Reason one: It may be caused by leakage from the drainage plug at the bottom of the compartment, leakage from the sunroof drainage pipe, door leakage, leakage of antifreeze from the heater core, damage or improper installation of the air conditioning drainage pipe, etc. Open the engine compartment (front cover), remove the battery, and you can see the drainage hole. Remove the funnel-shaped rubber pad of the drainage hole with a screwdriver. 2. Reason two: There are also multiple possibilities, one is sunroof leakage due to poor sealing, check the sunroof; the second is water from car washing that was not cleaned properly; the third is rusting of the car's small water tank, which is used for cabin heating, leading to leakage. Remove the soaked comfort control module, blow it with an air pump, and use a towel to absorb the water from the cabin floor.
11
0
Share

Which car brand has a lion logo?

The car with a lion logo is Dongfeng Peugeot. Its models include: Peugeot 408, Peugeot 307, Peugeot 207, Peugeot 301, Peugeot 206, etc. Taking the 2020 Peugeot 408 as an example, its body structure is a 4-door 5-seater sedan with dimensions of: length 4750mm, width 1820mm, height 1488mm, wheelbase 2730mm, fuel tank capacity 53l, and trunk capacity 455l. The 2020 Peugeot 408 is equipped with a 1.2l turbocharged engine, with a maximum horsepower of 136ps, maximum power of 100kw, maximum torque of 230nm, and is paired with a 6-speed dual-clutch transmission.
8
5
Share

Where is the right B-pillar?

Automobile B-pillar is located between the front and rear seats of the cockpit, which is the vertical bar between the two doors on both sides, extending from the roof to the bottom of the car. From the inside, the seat belt is on the B-pillar. Definition of B-pillar: The B-pillar, also known as the center pillar, is located between the front and rear seats of the cockpit. It bears the pressure from the roof and the front and rear doors. In addition, some additional parts, such as the front seat belts, are installed inside the B-pillar. Therefore, to better achieve force transmission, the B-pillar often protrudes outward. The contradiction of the center pillar lies in achieving a balance between stiffness and weight. A and C pillars: The A-pillar, B-pillar, and C-pillar are the main parts supporting the structural strength of the vehicle. The A-pillar of a car is the pillar connecting the roof and the body on the left front and right front of the driver; the C-pillar is the pillar connecting the roof and the body on the far right and left sides of the rear seats.
15
5
Share

Do I have to repair the car immediately after filing an insurance claim?

Filing an insurance claim does not necessarily mean you have to repair the car immediately. There is no time limit, and you can consult local repair shops for the repair time after the damage assessment. When repairing the car, check whether it is within the warranty period: If the vehicle is within the warranty period of a 4S shop, have it repaired at the 4S shop to ensure you can enjoy the warranty policy. If the vehicle is out of warranty, go to auto repair centers or similar places, which are cheaper than 4S shops with lower labor costs. Negotiate the price before repair: 4S shops have fixed prices with no room for negotiation, while other repair shops allow price discussions. Before the repair, clarify the parts to be repaired and the labor costs to avoid additional charges midway.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.