What is the reason for the lock button clicking repeatedly after locking the Buick Excelle?

2 Answers
DiCody
07/29/25 9:20pm
It is possible that the small switch inside the central control motor of the left front door is broken. Unplug the connector; if the others stop clicking, then the left front door central control motor needs to be replaced. The method for removing the door lock of the Buick Excelle: 1. Pry off the small speaker. 2. Pry open the rearview mirror adjustment panel from below. 3. Carefully pry off the outer frame around the speaker, being extra cautious not to damage the clips. 4. After removing all three screws at the bottom of the door, lift the entire door panel upward with force. 5. Then disconnect all the wiring connectors inside, and the door panel can be separated. The Buick Excelle is a compact hatchback. Its prototype is a global mid-size sedan developed by General Motors, designed and developed primarily by GM Daewoo Auto & Technology. It is equipped with 1.8-liter and 1.6-liter inline 4-cylinder engines, featuring Twin-Tec technology with DOHC16(V) valve double overhead camshaft design.
Was this review help?
17
3
Share
LaSawyer
08/15/25 7:56pm
After locking the Buick Excelle, the lock button keeps clicking randomly. I understand this is quite annoying, and there could be several reasons. First, the key fob battery might be low on power. Low voltage can cause abnormal signal transmission, resulting in delayed or erratic responses when pressing the button, especially noticeable in winter. Second, the car door might not be fully closed, or a small component in the locking system could be stuck, preventing the button from rebounding properly. Third, environmental interference, such as strong magnetic fields or nearby radio equipment, might disrupt the remote signal. It's recommended to first try replacing the key fob battery—this usually costs just a few dollars and often solves the issue. If that doesn’t work, check whether the doors and trunk are securely closed to avoid accidental triggers. For safety, if the button continues to malfunction, don’t ignore it—visit a reputable repair shop promptly to prevent potential theft risks due to locking failure. I’ve dealt with a similar issue myself—replacing the battery fixed it. Developing a habit of regular maintenance can help prevent such problems.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What is the SVS indicator light?

SVS refers to the engine fault indicator light. It is normal for the light to illuminate when the vehicle's ignition key is turned on and then turn off after the vehicle starts. If the light comes on while driving, it indicates a fault in the vehicle's engine. The SVS light is a standard indicator in the automotive industry, responsible for warning of abnormalities in the powertrain system and prompting users to take the vehicle to a service center for inspection. The alert originates from the engine, transmission, or gear shift control mechanism. All fuel-injected vehicles have an SVS fault indicator light—for manual transmissions, it serves as the engine fault indicator, while for automatic transmissions, it indicates both engine and automatic transmission faults. When the SVS light is on, the first step is to check if other vehicle systems show abnormalities, such as the coolant temperature gauge or oil pressure warning light. If only the SVS light is on and the engine can still start, drive cautiously, control your speed, and promptly take the vehicle to a repair shop for inspection.
19
1
Share

How to adjust the time on Dongfeng Fengguang 580?

Dongfeng Fengguang 580 time adjustment method: When the dashboard speed shows 0, press and hold the set button at the lower right of the dashboard, the mileage and time will pop up, then select to adjust, and it will automatically confirm after a few seconds of adjustment. Dongfeng Fengguang 580 is an SUV under Dongfeng, with flexible space, freely convertible between 5-seat and 7-seat, meeting diverse travel needs. In terms of body size, the Dongfeng Fengguang 580 has a length, width, and height of 4700 mm, 1845 mm, and 1715 mm respectively, with a wheelbase of 2780 mm. The Dongfeng Fengguang 580 is front-wheel drive, with front suspension type as MacPherson independent suspension, rear suspension type as torsion beam non-independent suspension, and the body structure is load-bearing.
2
2
Share

Should the positive or negative terminal of a car battery be connected first?

When connecting a car battery, the positive terminal should be connected first, followed by the negative terminal. The charging method is as follows: 1. Position the two vehicles facing each other, open the front hood, and take out the charging clamps; 2. Attach the positive clamps to the positive terminals of both car batteries; 3. Attach the negative clamps to the negative terminals of both car batteries; 4. Start the rescue vehicle to begin charging. The maintenance methods for a car battery include: 1. Avoid parking the car in an open parking lot for extended periods to prevent the battery from freezing and getting damaged; 2. Since car engines are harder to start in winter, each attempt to start the car should not exceed 5 seconds; 3. Regularly charge the battery by starting the car periodically to keep the battery charged; 4. Clean the battery terminals periodically and apply special grease to protect the wiring.
16
0
Share

How to Restart After Stalling on a Slope?

To restart after stalling on a slope, follow these steps: 1. Engage first gear and fully depress the clutch. 2. Slowly release the clutch to the semi-engaged state, hold it steady, and gently press the accelerator. 3. Release the handbrake when the front of the car lifts noticeably, then fully release the clutch. The reasons for stalling during slope starts include: 1. Not applying throttle in time. 2. Releasing the clutch too quickly. 3. Prolonged acceleration with the throttle. 4. Forgetting to engage the handbrake or shift to neutral. 5. Unstable coordination between throttle and clutch. For downhill starts, the method is: 1. Depress the clutch and brake, shift the gear lever to neutral. 2. Depress the clutch and brake, turn the key to the first position to let the car self-check. 3. Turn the key further to start the engine. 4. After the engine starts, engage first gear. 5. Slowly release the clutch and brake, and when the car vibrates noticeably, slightly release the brake to start moving.
16
1
Share

What oil grade is suitable for the Audi Q5?

Audi Q5 is more suitable with 5W40 grade oil. Engine oil can lubricate and reduce wear, assist in cooling, seal against leaks, prevent rust and corrosion, and cushion shocks. When changing the oil, choose the appropriate oil according to your needs. Taking the Audi Q5 2018 model as an example, its body dimensions are: length 4629 mm, width 1898 mm, height 1655 mm, wheelbase 2807 mm, and fuel tank capacity 75 liters. The Audi Q5 2018 model is equipped with a 2.0T turbocharged engine, with a maximum power of 169 kW and a maximum torque of 350 Nm.
8
1
Share

What engine does the Mazda 2 use?

The Mazda 2 is equipped with 1.3-liter and 1.5-liter naturally aspirated engines. An engine is a machine that converts other forms of energy into mechanical energy. The Mazda 2 is a compact car under Changan Mazda. Taking the 2012 Xuan Dong Edition manual standard model as an example, its body dimensions are: length 3905 mm, width 1695 mm, height 1480 mm, wheelbase 2490 mm, and fuel tank capacity 42 liters. The 2012 Xuan Dong Edition manual standard model is paired with a 5-speed manual transmission, with a maximum horsepower of 86, maximum power of 63 kilowatts, and maximum power speed of 6000 revolutions per minute.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.