What is the reason for the Landwind X7 recall?

How many times should the brake be tapped during Subject 3 test?

Subject 3 requires tapping the brake 7 times. Here are the specific details: Straight through intersections: Before entering an intersection during straight-line driving, you need to tap the brake to slow down. The speed should not exceed 30km/h when passing through the intersection. Pedestrian crossings: During the road test, when you see a pedestrian crossing ahead, you must reduce your speed. If there are pedestrians on the crossing, you must stop the vehicle and yield to them. Remember, do not stop the vehicle on the pedestrian crossing. Bus stops: During the road test, if you hear the voice prompt to pass a bus stop, you must immediately tap the brake. Passing schools: In areas near schools, the speed must be kept below 30km/h, and you must also use the brake appropriately. U-turns: When making a U-turn, you need to reduce your speed. This ensures the vehicle does not lose control due to excessive speed and inertia during the turn.

17

2

Share

What is the difference between the Mercedes-Benz CLA AMG and C-Class AMG?

Mercedes-Benz CLA-Class AMG is equipped with a 2.0T L4 421 horsepower turbocharged engine, with a maximum power of 310 KW and a maximum torque of 500 N•m, paired with an 8-speed dual-clutch transmission. The Mercedes-Benz A-Class AMG is equipped with a 2.0T L4 306 horsepower turbocharged engine, with a maximum power of 225 KW and a maximum torque of 400 N•m, paired with a 7-speed dual-clutch transmission. Introduction to Mercedes-Benz CLA-Class AMG: The Mercedes-Benz CLA AMG is the latest member of the AMG family and is also known as the "most powerful mass-produced 2.0T four-cylinder car in history." Its large multi-spoke wheels and rear aerodynamic kit give the car a very sporty appearance. Introduction to Mercedes-Benz AMG: Mercedes-AMG is a high-performance sub-brand of Mercedes-Benz, specializing in the development of high-performance vehicles. In the 1990s, AMG introduced classic models such as the C36 AMG, E50 AMG, C43 AMG, and various versions of the "55" series after 1997.

6

5

Share

What is the reason for the oil pressure warning light turning off when accelerating?

The reasons why the oil pressure warning light turns off when accelerating: 1. Faulty oil pressure sensor: As an electronic component, when the sensor malfunctions, the oil light may illuminate. 2. Clogged oil filter: Some inferior oil filters may become blocked, and if their bypass function has insufficient flow, this can slow down oil circulation and cause insufficient oil pressure. 3. Oil pump failure: Generally accompanied by increased engine noise and illumination of the oil warning light. 4. Excessive oil viscosity or low oil pump pressure: Leading to insufficient oil pressure. Additional relevant information: Oil pressure: When the oil level falls below the engine's warning threshold, the oil pump cannot circulate sufficient oil, resulting in reduced oil pressure. It should be noted that some vehicles are designed with safety considerations in mind, intentionally setting the dipstick's lower limit higher. The dipstick's lower limit is merely a reference, and the actual warning level is lower than this limit. In other words, oil levels below the dipstick's lower limit do not necessarily trigger the oil warning light.

2

1

Share

How many years after the age of a private car is it subject to two inspections per year?

Private cars that are over 15 years old are subject to two inspections per year. Private cars are exempt from inspection within the first 6 years; after 6 years, they must undergo one inspection per year; after 15 years, they require two inspections per year. For passenger transport vehicles, inspections are required once per year within the first 5 years; after 5 years, inspections are required every 6 months. For cargo vehicles and large or medium-sized non-passenger transport vehicles, inspections are required once per year within the first 10 years; after 10 years, inspections are required every 6 months. According to relevant laws, vehicle owners can apply for an inspection compliance mark at the local vehicle management office within three months before the expiration of the current inspection period. Notes for private car annual inspections: The compulsory traffic insurance policy must be valid, all traffic violations must be resolved, and all required documents must be prepared (ID of the owner or agent, vehicle registration certificate, insurance policy). Do not forget to bring the triangular warning sign and fire extinguisher. If the vehicle has been modified or has non-compliant stickers, these must be removed before the inspection to avoid failure.

5

0

Share

What does X-Trail 2WD mean?

2WD mode refers to the two-wheel drive mode, where the power is delivered to the front wheels. Characteristics of 2WD: The two-wheel drive system can be further categorized based on the position of the engine and the drive wheels, including front-engine rear-wheel drive (FR), front-engine front-wheel drive (FF), rear-engine rear-wheel drive (RR), and mid-engine rear-wheel drive (MR). Among these, front-engine rear-wheel drive (FR) is the most commonly used in two-wheel drive SUVs and sedans. FR, short for front-engine rear-wheel drive, is a traditional drive configuration. In this setup, the front wheels are responsible for steering, while the rear wheels handle the vehicle's propulsion. The engine's power is entirely transmitted to the rear drive axle, driving the rear wheels to move the car forward. Essentially, the rear wheels 'push' the front wheels to propel the vehicle. Difference between 2WD and 4WD: 2WD stands for two-wheel drive, while 4WD stands for four-wheel drive. The four-wheel drive system distributes the engine's driving force from two wheels in a 2WD system to all four wheels. 4WD utilizes a low-range gear ratio to help the vehicle overcome slipping on muddy or snowy surfaces.

15

3

Share

Can You Shift Gears During Straight-Line Driving in Subject Three?

You can shift gears during straight-line driving in Subject Three, but you must ensure that the gear matches the vehicle speed. If the vehicle speed and gear do not match, points will be deducted. Techniques for shifting gears during straight-line driving in Subject Three: Upshifting: After starting the vehicle and entering the normal driving route, immediately press the accelerator pedal to quickly increase the speed to the low-speed range of the next higher gear. Shift the gear lever to the higher gear. When lifting the clutch and accelerating, the engine and vehicle should not shake. If shaking occurs, it indicates insufficient speed increase, and the speed should be raised further. Downshifting: First release the accelerator, apply slight braking, press the clutch pedal fully with the left foot, and then shift to a lower gear. Speed and gear matching: 1st gear speed range: 0-15 km/h; 2nd gear speed range: 15-25 km/h; 3rd gear speed range: 25-35 km/h; 4th gear speed range: 35-40 km/h. If the wrong gear is engaged, return to the original gear and start again, but upshifting beyond the next gear is not recommended.

11

5

Share

What is the reason for the Landwind X7 recall?

How many times should the brake be tapped during Subject 3 test?

What is the difference between the Mercedes-Benz CLA AMG and C-Class AMG?

What is the reason for the oil pressure warning light turning off when accelerating?

How many years after the age of a private car is it subject to two inspections per year?

What does X-Trail 2WD mean?

Can You Shift Gears During Straight-Line Driving in Subject Three?

Does Audi Have Image and Distance Sensors?

Is the left foot allowed to rest on the clutch during Subject Three?

Which one is the Enclave motor relay?

What are the chassis codes for previous generations of the Fit?