What is the reason for the inexplicable anti-theft alarm of the Haval H6?

1 Answers
JosephAnn
07/29/25 5:04pm
Haval H6 inexplicable anti-theft alarm is caused by a function key that should be turned off not being turned off, or a false alarm. It is necessary to check whether the circuit is abnormal in time. Haval H6 key alarm cancellation: When the vehicle is in the alarm activation state of the anti-theft mode, press the "lock" button. Whether the door lock is opened or not, all door lock motors perform a locking action at the same time, and the alarm is canceled. At this time, the vehicle is still in the anti-theft state. Cancel the anti-theft state: When the vehicle is in the anti-theft state (including the anti-theft alarm activation), press the "unlock" button. All doors perform an unlocking action at the same time, the turn signal flashes three times, and the anti-theft state is canceled. Solution: It is recommended to check the anti-theft alarm horn and whether the power harness of the anti-theft horn can be powered off after unlocking.
Was this review help?
7
2
Share
More Forum Discussions

How to Reset the Tire Pressure Warning Light on a Porsche Cayenne?

Ensure all tires have the correct pressure. Turn the ignition to the ON position, press and hold the MENU button, then press the OK button. Navigate to Setting and press OK. Select Tyres and press OK. Choose Spare-Whee and press OK. Start the engine, the dashboard will prompt whether to set the tire pressure values. Select YES to reset the tire pressure warning light.
11
1
Share

What are the symptoms of a stretched car timing chain?

Generally, when the timing chain is stretched, there will be abnormal noises. Continuing to drive may easily cause the chain to skip teeth, resulting in incorrect ignition timing, increased engine fuel consumption, and reduced power. If the stretching becomes more severe, the engine may experience chain skipping during high-speed operation or sudden acceleration, which could lead to engine failure.
16
1
Share

What are the steps for testing automotive fuel pressure?

First, remove the fuel pump fuse, relay, or fuel pump plug, then start the engine. After the engine stalls, restart it 2-3 times, and disconnect the negative terminal of the battery. Connect the fuel pressure gauge in series to the fuel inlet pipe. For vehicles with a pressure test port, connect the fuel pressure gauge to the test port. Place a towel under the connection when removing fuel pipes. Test static fuel pressure, idle fuel pressure, maximum fuel pressure, and residual fuel pressure.
15
3
Share

How to View the In-Car Monitoring in a Porsche Cayenne?

Remove the memory card from the dash cam and search through the folders one by one. Connect the dash cam to a computer using a USB cable. Select and open the storage device to access its contents. Playback on the dash cam. First, pause the recording, then press the MODE button to navigate and find the recorded videos. Select the playback option in the menu to open and watch the recordings.
4
5
Share

What to Do When the Car Air Conditioner Is Noisy at Maximum Airflow?

If the noise is caused by a damaged fan bearing, generally replacing the damaged component will suffice. If the noise is due to a deformed exhaust fan blade or a damaged exhaust fan motor, then the exhaust fan needs to be replaced. If the noise is caused by excessive dirt inside the air conditioner, then the air conditioner needs to be cleaned. If the fan is damaged, then the fan needs to be repaired.
18
1
Share

What is the problem when a car relay becomes hot to the touch?

Abnormal heating occurs at the center of the contact point due to continuous arcing caused by repeated switching of the contacts. The internal circuit of the relay experiences phenomena such as fusing and contact melting/solidification. This may be caused by abnormal overcurrent exceeding the rated current of the contacts. Partial short-circuiting of the coil leads to fusing, coil breakage, or abnormal residual heating traces on the coil. This might result from excessive voltage being applied to the coil.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.