What is the reason for the idle shaking of the new Elantra?

1 Answers
OJocelyn
07/30/25 4:03am
The reasons for the idle shaking of the new Elantra are: 1. Excessive carbon deposits on the valves or fuel injectors; 2. Poor performance of the ignition system or bad spark plug conditions can also cause engine idle shaking; 3. Abnormal fuel pump pressure or incorrect readings from the intake pressure sensor. The solution is to clean the carbon deposits on the throttle body and fuel injectors or replace the spark plugs in time. In terms of interior, the Elantra's dashboard adopts a design tilted towards the driver's side, featuring a new dual-dial instrument panel, a new-style three-spoke multifunctional steering wheel, an 8-inch central control display, and a separate air conditioning status display. The car's powertrain is equipped with a 1.4T engine, matched with a dual-clutch transmission.
Was this review help?
10
4
Share
More Forum Discussions

Should the handbrake be pulled up or released while driving?

When driving, the handbrake should be released. Below is relevant information about the handbrake: 1. The handbrake should be released while driving. When parking, the handbrake needs to be engaged. Pulling the handbrake activates a hydraulic auxiliary cylinder, which drives the main hydraulic cylinder beneath the car, operating the air valve and subsequently braking the driveshaft. 2. The professional term for the handbrake is the auxiliary brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness. 3. The correct way to use the handbrake when parking is: do not pull it too tight; avoid engaging the handbrake after snowy or icy conditions or after washing the car in winter; and do not use the handbrake for extended periods when parking on slopes.
5
1
Share

What Tools Are Needed to Clean a Car Chassis?

Cleaning a car chassis requires equipment to lift the vehicle, sufficient water pressure, and specialized chemical agents for removing specific substances. Types of Chassis Stains: Mud-type stains can be directly removed with the pressure from a high-pressure water gun, while curved areas may require multiple rinses to ensure complete removal. Grease-type stains generally cannot be cleaned with water alone; a small scraper tool is needed as preliminary preparation. If necessary, degreasers and other tools may be required. Inspection and Repair: After cleaning, a thorough inspection should be conducted. If rust is found during inspection, it must be sanded and removed. Once derusting and cleaning are complete, the car chassis should be dried and wiped clean, followed by an even application of a rust-proofing agent to form a long-lasting protective film. Allow it to air-dry naturally before applying a protective coating. Since the car chassis is made of metal, it is prone to rusting in the air, making future cleaning more difficult. Applying a protective coating helps mitigate these issues.
7
1
Share

Should You Use Recirculated or Fresh Air Mode in Car AC?

When turning on the AC for cooling or heating, first activate recirculation mode to rapidly lower or raise the cabin temperature. Once stabilized, appropriately switch to fresh air mode for ventilation. The key difference lies in air intake - recirculation draws air from inside the cabin. Choose between modes based on these scenarios: 1. After parking under scorching sun when the cabin feels like a sauna, initially use fresh air mode with windows/sunroof open to accelerate heat dissipation. After 3-5 minutes when temperature stabilizes, close windows, activate cooling and switch to recirculation. 2. In extreme winter cold, delay heating until engine reaches normal operating temperature, then use recirculated heat for faster warming. 3. During traffic jams, prefer recirculation to avoid circulating polluted external air.
9
4
Share

Which country produces Acura?

Acura cars are produced in Japan. Here are the relevant details about Acura: 1. Acura is a premium sub-brand under Japan's Honda Motor Company, established in the United States in 1986. The name 'Acura' is derived from the Latin word 'Accuracy,' and its logo features a caliper used in engineering measurements, symbolizing Acura's exquisite craftsmanship and pursuit of perfection. 2. As the first Japanese luxury car brand, Acura redefined the concept of luxury vehicles with its 'Performance Luxury' philosophy that emphasizes individuality and cutting-edge technology. The brand achieved tremendous success in the North American market upon its launch. 3. Acura's models are designed, developed, and manufactured in North America, resulting in a diverse product line led by models such as the TL, RL, and MDX. 4. The Acura brand officially entered the Chinese market on September 27, 2006.
14
4
Share

How to Deal with Frost on the Inside of a Car Windshield?

There are four solutions to deal with frost on the inside of a car windshield: 1. Use warm air to defrost: Start the car and, once the engine coolant temperature rises, blow warm air onto the windshield until the ice melts. However, this method has certain drawbacks as it is time-consuming, labor-intensive, and consumes more fuel. 2. Physical defrosting: When there is snow and ice on the glass, use a plastic scraper or a glass frost scraper to remove it. A glass frost scraper is more convenient, faster, and does not freeze your hands. 3. Chemical defrosting: Use a spray de-icer to remove frost. This is a high-speed anti-ice spray concentrate specifically designed to thaw frozen car windows and wipers, which does not damage the car's surface and can prevent re-freezing and dirt accumulation. 4. Maintain consistent temperature inside and outside the car: When parking, you can first open the car door and wait for a while until the warmer air inside the car is expelled. Close the door when the temperature inside and outside the car is similar, which can reduce the likelihood of frost forming on the windows.
8
5
Share

Where is the battery located in an Audi A4?

Audi A4's battery is located in the trunk, beneath the spare tire after opening the trunk. Additional information is as follows: Car batteries, also known as storage batteries, are a type of battery that works by converting chemical energy into electrical energy. They are categorized into conventional batteries, dry-charge batteries, and maintenance-free batteries. Typically, what people refer to as car batteries are lead-acid batteries. The normal service life of a car battery ranges from 1 to 8 years, largely depending on the vehicle's condition. When the car is not used for an extended period, it is advisable to disconnect the negative terminal of the battery to prevent battery drain. If the car remains unused for a long time, it's beneficial to take it out for a short drive occasionally, allowing the alternator to recharge the battery. During winter, try to avoid leaving the car parked outside overnight, as this may lead to difficulty starting the engine the next morning. The low outdoor temperatures in winter can shorten the battery's lifespan. During routine maintenance, have a technician measure the battery's internal resistance and voltage to assess its condition.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.